RE22R1ACMR

RE22R1ACMR SCHNEIDER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Harmony, Modular timing relay, 8 A, 1 CO, 0.05 s…300 h, dual function, 24...240 V AC/DC Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 74.24 USD Main Range of Product Harmony Timer Relays Product or Component Type Dual function relay Discrete output type Relay Device short name RE22 Nominal output current 8 A Complementary Contacts type and composition 1 C/O timed contact, cadmium free Time delay type On-delay and off-delay Time delay range 3...30 min 1...10 s 30...300 s 10...100 s 3...30 s 30...300 min 30...300 h 0.3...3 s 0.05...1 s 3...30 h Control type Rotary knob Diagnostic button Potentiometer external [Us] rated supply voltage 24...240 V AC/DC 50/60 Hz Release input voltage <= 2.4 V Supply frequency 50...60 Hz +/- 5 % Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications * Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price. Aug 25, 2021

Housing material Self-extinguishing Repeat accuracy +/- 0.5 % IEC 61812-1 Temperature Drift +/- 0.05 %/°C Voltage drift +/- 0.2 %/V Setting accuracy of time delay +/- 10 % of full scale 25 °C IEC 61812-1 Control signal pulse width 100 ms with load in parallel 30 ms Insulation resistance 100 MOhm 500 V DC IEC 60664-1 Recovery time 120 ms on de-energisation Immunity to microbreaks 10 ms Power consumption in VA 3 VA 240 V AC Power consumption in W 1.5 W 240 V DC Switching capacity in VA 2000 VA Minimum switching current 10 mA 5 V DC Maximum switching current 8 A Maximum switching voltage 250 V AC Electrical durability 100000 cycles, 8 A at 250 V, AC-1 100000 cycles, 2 A at 24 V, DC-1 Mechanical durability 10000000 cycles Rated impulse withstand voltage 5 kV 1.2…50 µs IEC 60664-1 Power on delay 100 ms Creepage distance 4 kV/3 IEC 60664-1 Overvoltage category III IEC 60664-1 Safety reliability data B10d = 190000 MTTFd = 205.4 years Mounting position Any position Mounting support 35 mm DIN rail conforming to EN/IEC 60715 Status LED Green LED backlight steady)dial pointer indication Yellow LED steady)output relay energised Yellow LED fast flashing)timing in progress and output relay de-energised Yellow LED slow flashing)timing in progress and output relay energised Maximum Width 0.89 in (22.5 mm) Net Weight 0.22 lb(US) (0.1 kg) Environment Dielectric strength 2.5 kV 1 mA/1 minute 50 Hz between relay output and power supply basic insulation IEC 61812-1 Standards IEC 61812-1 UL 508 Directives 2006/95/EC - low voltage directive 2004/108/EC - electromagnetic compatibility Product Certifications CE CCC GL UL CSA EAC RCM Ambient Air Temperature for Operation Ambient Air Temperature for Storage -40…158 °F (-40…70 °C) IP degree of protection Housing IP40 IEC 60529 IP50 front face: conforming to IEC 60529 Terminals IP20 IEC 60529 Pollution degree 3 conforming to IEC 60664-1 Vibration resistance 20 m/s² 10…150 Hz)IEC 60068-2-6 Shock resistance 15 gn not operating 11 ms IEC 60068-2-27

5 gn in operation 11 ms IEC 60068-2-27 Relative humidity 95 % 77…131 °F (25…55 °C) Electromagnetic compatibility Fast transients immunity test 1 kV capacitive connecting clip)level 3 IEC 61000-4-4 Surge immunity test - test level: 1 kV level 3 (differential mode) conforming to IEC 61000-4-5 Surge immunity test - test level: 2 kV level 3 (common mode) conforming to IEC 61000-4-5 Electrostatic discharge 6 kV contact discharge)level 3 IEC 61000-4-2 Electrostatic discharge 8 kV air discharge)level 3 IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test 10 V/m 80 MHz...1 GHz)level 3 IEC 61000-4-3 Conducted RF disturbances 10 V 0.15...80 MHz)level 3 IEC 61000-4-6 Fast transient bursts 2 kV direct contact)level 3 IEC 61000-4-4 Immunity to microbreaks and voltage drops 30 % 500 ms) IEC 61000-4-11 Immunity to microbreaks and voltage drops 100 % 20 ms) IEC 61000-4-11 Ordering and shipping details Category 22376 - RELAYS-MEASUREMENT(RM4) Discount Schedule CP2 GTIN 03606480792403 Nbr. of units in pkg. 1 Package weight(Lbs) 3.53 oz (100 g) Returnability No Country of origin ID Packing Units Unit Type of Package 1 PCE Package 1 Height 1.02 in (2.6 cm) Package 1 width 3.23 in (8.2 cm) Package 1 Length 3.74 in (9.5 cm) Offer Sustainability Sustainable offer status Green Premium product California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov REACh Regulation REACh Declaration EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information

Function Ac: On-Delay & Off-Delay with Control Signal

Description

After energisation of power supply and energization of Y1 causes the timing period T to start. At the end of this timing period, the output(s) R close(s). When deenergization of Y1, the timing T starts. At the end of this timing period T,the output(s) R revert(s) to its/their initial position. The second output (R2) can be either timed (when set to "TIMED") or instantaneous (when set to "INST"). Function: 1 Output Function: 2 Outputs

Function Act: On-Delay & Off-Delay with Control Signal & With Pause / Summation Control After energisation of power supply and energization of Y1 causes the timing period T to start and the timing can be interrupted / paused each time X1 energizes.When the cumulative total of time periods elapsed reaches the pre-set value T, the output(s) R close(s).When deenergization of Y1, the timing T starts and the timing can be interrupted / paused each time X1 energizes. When the cumulative total of time periods elapsed reaches the pre-set value T, the output(s) R revert(s) to its/their initial position.The second output (R2) can be either timed (when set to "TIMED") or instantaneous (when set to "INST"). Function: 1 Output T = t1 + t2 +… T = t'1 + t'2 +… Function: 2 Outputs T = t1 + t2 +… T = t'1 + t'2 +… Legend Relay de-energised Relay energised Output open Output closed U - Supply T - Timing period R1/R2 - 2 timed outputs R2 inst. - The second output is instantaneous if the right position is selected X1 - Pause / Summation control Y1 - Retrigger / Restart control