RDP-50-2R15 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Low insertion loss
  • High stopband insertion loss
  • Miniature shielded package RDP-50-2R15+ Key Features Diplexer Product Overview RDP-50-2R15+ is a low-pass + high-pass combination device. Low pass port is designed for DC to 50 MHz and high pass port is designed for 950 to 2150 MHz. This diplexer can be used to pass, IF, pilot carrier or clock synchronizing signal, SATCOM modems, air-traffic control and other multiband radio systems. Feature Advantages Low passband insertion loss Suitable for high performance application. Extended stopband rejection Spurious rejection and avoids using additional filters. Shielded case. Reduced interference with the surrounding components. 50Ω DC to 2150 MHz Page 1 of 3 CASE STYLE: CK605 Surface Mount (DC-50, 950-2150 MHz)

50Ω DC to 2150 MHz (DC-50, 950-2150 MHz) Maximum Ratings Surface Mount RDP-50-2R15+Diplexer

Applications

  • SATCOM modem
  • Air-traffic control Electrical Specifications at 25°C

Features

  • Low insertion loss
  • 50Ω Impedance
  • Combination of Low pass and High pass filters
  • Miniature shielded pakckage
  • Aqueous washable CASE STYLE: CK605 Pin Connections Typical Performance Data at 25°C Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits REV.OR M153937 EDU1494/1 RDP-50-2R15+ URJ 160813 Page 2 of 3 HIGH PASS PORT 10 LOW PASS PORT 14 COMMON PORT 2 GROUND 1,3-9,11-13,15,16 Functional Schematic Outline Dimensions ( )inch mm Outline Drawing A .500 12.7 B .500 12.7 C .180 4.572 D .100 2.54 E .080 2.032 F .115 2.921 G .060 1.524 H .040 1.016 J .540 13.72 K .060 1.524 L .100 2.54 M .135 3.429 N .135 3.429 P .115 2.921 Q .140 3.556 R .070 1.778 S .150 3.81 T .070 1.778 Wt. grams 1.0 Demo Board MCL P/N: TB-10+ Suggested PCB Layout (PL-012) Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C RF Power Input 1W at 25°C Suggested Layout, Tolerance to be within ±.002 PCB Land Pattern FREQUENCY (MHz) INSERTION LOSS (dB) RETURN LOSS (dB) Low Pass Port High Pass Port Common Port Low Pass Port High Pass Port Parameter Port Frequency (MHz) Min. Typ. Max. Unit Pass Band Insertion Loss Low Pass DC-50 - 0.5 1.0 dB High Pass 950-2150 - 0.3 1.0 Flatness High pass 950-2150 - ± 0.1 - dB Return Loss Low Pass DC-50 15 22 - dB High Pass 950-2150 15 22 - Common DC-50 15 22 - 950-2150 15 22 - Stop Band Isolation Low Pass 150-950 25 34 - dB 950-2150 40 53 - High Pass 50-250 25 32 - dB DC-50 60 74 - +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

Insertion Loss (dB) RDP-50-2R15+ LOW PASS PORT INSERTION LOSS (Pin=0dBm) 100 1 10 100 1000 10000 Insertion Loss (dB) Frequency (MHz) Insertion Loss (dB) RDP-50-2R15+ HIGH PASS PORT INSERTION LOSS (Pin=0dBm) 100 120 1 10 100 1000 10000 Insertion Loss (dB) Frequency (MHz) Return Loss (dB) RDP-50-2R15+ COMMON PORT RETURN LOSS (Pin=0dBm) 1 10 100 1000 10000 Return Loss (dB) Frequency (MHz) Return Loss (dB) RDP-50-2R15+ LOW PASS PORT RETURN LOSS (Pin=0dBm) 1 10 100 1000 10000 Return Loss (dB) Frequency (MHz) Return Loss (dB) RDP-50-2R15+ HIGH PASS PORT RETURN LOSS (Pin=0dBm) 1 10 100 1000 10000 Return Loss (dB) Frequency (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits RDP-50-2R15+Performance Charts Page 3 of 3