RDE5C1H180J0C03

RDER72J104K8M1C11A MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 19

Technical content

Cat.No.C49E-21 Radial Lead Type Monolithic Ceramic Capacitors !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.C49E.pdf May.10,2011

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.C49E.pdf May.10,2011 o Part Numbering (Part Number) w qProduct ID wSeries/Terminal RP RH RD E E/D E Radial Lead Type Monolithic Ceramic Capacitors (DC25V-DC100V) Radial Lead Type Monolithic Ceramic Capacitors (For Commercial Use Only) (DC25V-DC630V) Radial Lead Type Monolithic Ceramic Capacitors 150°C max. (for Automotive) (DC50V-DC100V) Product ID Series/Terminal RP q E e r t 104 u i y K o A03 A tCapacitance Expressed by three-digit alphanumerics. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R ." In this case, all figures are significant digits. yCapacitance Tolerance Code C D J K M Z C0G C0G/X8G X7S/X7T/X7R/ X8L X7S/X7T/X7R/ X8L F/Y5V Radial Lead Type Monolithic Ceramic Capacitors eTemperature Characteristics Code 25 to 125°C 25 to 150°C -55 to 125°C -55 to 125°C -25 to 85°C -30 to 85°C -55 to 125°C 125 to 150°C -55 to 125°C Temperature Range 0–30ppm/°C 0–30ppm/°C –22% +22, -33% +30, -80% +22, -82% –15% +15, -40% –15% Capacitance Change or Temperature Coefficient -55 to 125°C -55 to 150°C -55 to 125°C -55 to 125°C -25 to 85°C -30 to 85°C -55 to 150°C -55 to 125°C Operating Temperature Range C0G* X8G* X7S X7T F Y5V X8L X7R Temperature Characteristics rRated Voltage Code DC25V DC50V DC100V DC250V DC450V DC630V Rated Voltage Temperature Characteristics V5pF : 1pF Step 6 to 9pF : 1pF Step U10 : E12 Series E6 Series E3 Series E3 Series Capacitance Step –0.25pF –0.5pF –5% –10% –20% +80%, -20% Capacitance Tolerance Reference Temperature 25°C 25°C 25°C 25°C 20°C 25°C 25°C 25°C Char. C0G X8G Nominal Values (ppm/˚C) *1 -55˚C Max. Min. Capacitance Change from 25˚C (%) -30˚C Max. Min. -10˚C Max. Min. * Please refer to table for Capacitance change under reference temperature.
• Capacitance change from each temperature *1: Nominal values denote the temperature coefficient within a range of 25 to 125˚C. Continued on the following page.

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C 49E.pdf M ay.10,2011 oIndividual Specification Code Expressed by three-digit alphanumerics uDimensions (LxW) Code U W 4.0g3.5mm or 5.0g3.5mm (Depends on Part Number List) 7.5g7.5mm* 10.0g10.0mm 12.5g12.5mm 7.5g5.5mm 7.7g12.5mm* 5.5g7.5mm iLead Style Code Lead Style Lead Spacing A 2 B 1 C 1 D B E1/E2 K 1 M 1/M 2 S1/S2 2.5mm 5.0mm 10.0mm 2.5mm 5.0mm 5.0mm 5.0mm 2.5mm 2.5mm Straight Long Straight Long Straight Long Straight Taping Straight Taping Inside Crimp Inside Crimp Taping Outside Crimp Outside Crimp Taping Dimensions (LxW) Lead distance between reference and bottom planes. E1: H = 17.5–0.5mm E2: H = 20.0–0.5mm !0Packaging Code A B Ammo Pack Bulk Packaging * DC630V: W+0.5mm Continued from the preceding page.

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Radial Lead Type Monolithic Ceramic Capacitors R D E Series (For C om m ercial U se O nly) (D C 25V-D C 630V) n Features 1. Sm all size and large capacitance 2. Low ESR characteristics for high frequency 3. C oated w ith epoxy resin w hose flam m ability is equivalent to U L94V-0 n Applications G eneral electronic equipm ent (D o not use for autom otive-related pow er train and safety equipm ent.) (in m m ) L m ax. ød : 0.5–0.05 T m ax. W m ax.25.0 m in. W 1 m ax. F–0.8 ∗ C oating extension does not exceed the end of the lead bend.
• Lead W ire : Solder C oated C opper W ire or Solder C oated C P W ire Dimensions code: 0/1/2/3 Lead style code: P1 (in m m ) ∗ C oating extension does not exceed the end of the lead bend.
• Lead W ire : Solder C oated C opper W ire or Solder C oated C P W ire ød : 0.5–0.05 T m ax.L m ax. W m ax.25.0 m in. W 1 m ax. F–0.8 Dimensions code: 0/1 Lead style code: K1 (in m m ) ∗ C oating extension does not exceed the end of the lead bend.
• Lead W ire : Solder C oated C opper W ire or Solder C oated C P W ire ød : 0.5–0.05 T m ax.L m ax. W m ax.25.0 m in. W 1 m ax. F–0.8 Dimensions code: 2/3/8 Lead style code: K1 (in m m ) T m ax.L m ax. ød : 0.5–0.05 W m ax.25.0 m in. 1.5 m ax. F–0.8
• Lead W ire : Solder C oated C opper W ire or Solder C oated C P W ire Dimensions code: 5 Lead style code: B1 (in m m ) L m ax. 2.0 m ax. F–0.8 W m ax.25.0 m in. T m ax.
• Lead W ire : Solder C oated C opper W ire or Solder C oated C P W ire ød : 0.5–0.05 Dimensions code: U Lead style code: B1 (in m m ) ∗ C oating extension does not exceed the end of the lead bend.
• Lead W ire : Solder C oated C opper W ire or Solder C oated C P W ire ød : 0.5–0.05 T m ax.L m ax. W m ax.25.0 m in. W 1 m ax. F–0.8 Dimensions code: W Lead style code: K1 n Dimensions Dimensions and Lead Style Code DC Rated Voltage Dimensions (mm) L W W1 T F d 0P1/0S1 0K 1/0M 1 1P1/1S1 1K 1/1M 1 2P1/2S1 2K 1/2M 1 3P1/3S1 3K 1/3M 1 5B 1/5E1 8K 1/8M 1 U B 1/U E1 W K 1/W M 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2.5 5.0 2.5 5.0 2.5 5.0 5.0 2.5 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 5.0 5.0 6.0 6.0 5.0 7.5 7.5 6.3 8.0 10.0 3.5 3.5 3.5 3.5 4.0 4.0 3.5 5.0 5.0 4.5 7.5* 5.5 12.5* 7.5 5.0 4.0 5.0 4.5 5.5 5.5 5.0 5.5 5.5 5.0 7.5 7.5 7.7 5.5 25V/50V/100V 25V/50V/100V 25V/50V/100V 25V/50V/100V 25V/50V/100V 25V/50V/100V 250V/630V 25V/50V/100V 25V/50V/100V 250V/630V 250V/630V 250V/630V 250V/630V 25V/100V See the individual product specifications *D C 630V: W +0.5m m Continued on the following page.

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Continued from the preceding page. n Marking Type Rated Voltage Temp. Char. Individual Specification Code App Individual Specification Code Cpp Dimensions Code 3, 8, W 5, U Temperature Characteristics Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification C0G DC50V, DC100V Temperature Compensating Type DC25V DC50V High Dielectric Constant Type DC100V DC250V DC630V – – – – – – – – 475 K2C M 475 K5C M 105 K5C M 105 K1C M 153 K4C M 153 K7C M U nder 100pF: Actual value 100pF and over: M arked w ith 3 figures M arked w ith code (C 0G char.: A, X7S/X7R char.: C , F/Y5V char.: F) A part is om itted (Please refer to the m arking exam ple.) M arked w ith code A part is om itted (Please refer to the m arking exam ple.) M arked w ith code (D C 25V: 2, D C 50V: 5, D C 100V: 1, D C 250V: 4, D C 630V: 7) Low er horizontal line for F char. A part is om itted (Please refer to the m arking exam ple.) X7S X7R X7S X7R F Y5V X7S X7R X7R 474 K4C M 474 M 7C M A 102J 224K 224K 224K 103K 104K 473 103Z 226 K2C M 335 K5C M 225 K1C M 104 K4C M 104 K7C M MM arked w ith A part is om itted (Please refer to the m arking exam ple.) Tem perature C om pensating Type, C 0G C haracteristics Part Number Temp. Char. Rated Voltage (Vdc) Capacitance (pF) Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) R D E5C 1H 100J0ppC 03p C0G 50 10 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 100J0ppC 03p C0G 50 10 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 120J0ppC 03p C0G 50 12 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 120J0ppC 03p C0G 50 12 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 150J0ppC 03p C0G 50 15 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 150J0ppC 03p C0G 50 15 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 180J0ppC 03p C0G 50 18 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 180J0ppC 03p C0G 50 18 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 220J0ppC 03p C0G 50 22 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 220J0ppC 03p C0G 50 22 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 270J0ppC 03p C0G 50 27 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 270J0ppC 03p C0G 50 27 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 330J0ppC 03p C0G 50 33 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 330J0ppC 03p C0G 50 33 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 390J0ppC 03p C0G 50 39 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 390J0ppC 03p C0G 50 39 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 470J0ppC 03p C0G 50 47 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 470J0ppC 03p C0G 50 47 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 560J0ppC 03p C0G 50 56 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 560J0ppC 03p C0G 50 56 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - Continued on the following page.

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number Temp. Char. Rated Voltage (Vdc) Capacitance (pF) Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) Continued from the preceding page. R D E5C 1H 680J0ppC 03p C0G 50 68 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 680J0ppC 03p C0G 50 68 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 820J0ppC 03p C0G 50 82 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 820J0ppC 03p C0G 50 82 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 101J0ppC 03p C0G 50 100 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 101J0ppC 03p C0G 50 100 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 121J0ppC 03p C0G 50 120 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 121J0ppC 03p C0G 50 120 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 151J0ppC 03p C0G 50 150 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 151J0ppC 03p C0G 50 150 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 181J0ppC 03p C0G 50 180 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 181J0ppC 03p C0G 50 180 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 221J0ppC 03p C0G 50 220 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 221J0ppC 03p C0G 50 220 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 271J0ppC 03p C0G 50 270 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 271J0ppC 03p C0G 50 270 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 331J0ppC 03p C0G 50 330 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 331J0ppC 03p C0G 50 330 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 391J0ppC 03p C0G 50 390 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 391J0ppC 03p C0G 50 390 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 471J0ppC 03p C0G 50 470 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 471J0ppC 03p C0G 50 470 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 561J0ppC 03p C0G 50 560 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 561J0ppC 03p C0G 50 560 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 681J0ppC 03p C0G 50 680 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 681J0ppC 03p C0G 50 680 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 821J0ppC 03p C0G 50 820 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 821J0ppC 03p C0G 50 820 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 1H 102J0ppC 03p C0G 50 1000 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 1H 102J0ppC 03p C0G 50 1000 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 100J0ppC 03p C0G 100 10 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 100J0ppC 03p C0G 100 10 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 120J0ppC 03p C0G 100 12 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 120J0ppC 03p C0G 100 12 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 150J0ppC 03p C0G 100 15 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 150J0ppC 03p C0G 100 15 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 180J0ppC 03p C0G 100 18 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 180J0ppC 03p C0G 100 18 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 220J0ppC 03p C0G 100 22 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 220J0ppC 03p C0G 100 22 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 270J0ppC 03p C0G 100 27 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 270J0ppC 03p C0G 100 27 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 330J0ppC 03p C0G 100 33 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 330J0ppC 03p C0G 100 33 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 390J0ppC 03p C0G 100 39 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 390J0ppC 03p C0G 100 39 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 470J0ppC 03p C0G 100 47 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 470J0ppC 03p C0G 100 47 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 560J0ppC 03p C0G 100 56 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 560J0ppC 03p C0G 100 56 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 680J0ppC 03p C0G 100 68 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 680J0ppC 03p C0G 100 68 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 820J0ppC 03p C0G 100 82 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 820J0ppC 03p C0G 100 82 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 101J0ppC 03p C0G 100 100 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 101J0ppC 03p C0G 100 100 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 121J0ppC 03p C0G 100 120 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - Continued on the following page.

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number Temp. Char. Rated Voltage (Vdc) Capacitance (pF) Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) Continued from the preceding page. R D E5C 2A 121J0ppC 03p C0G 100 120 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 151J0ppC 03p C0G 100 150 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 151J0ppC 03p C0G 100 150 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 181J0ppC 03p C0G 100 180 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 181J0ppC 03p C0G 100 180 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 221J0ppC 03p C0G 100 220 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 221J0ppC 03p C0G 100 220 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 271J0ppC 03p C0G 100 270 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 271J0ppC 03p C0G 100 270 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 331J0ppC 03p C0G 100 330 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 331J0ppC 03p C0G 100 330 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 391J0ppC 03p C0G 100 390 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 391J0ppC 03p C0G 100 390 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 471J0ppC 03p C0G 100 470 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 471J0ppC 03p C0G 100 470 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 561J0ppC 03p C0G 100 560 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 561J0ppC 03p C0G 100 560 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 681J0ppC 03p C0G 100 680 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 681J0ppC 03p C0G 100 680 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 821J0ppC 03p C0G 100 820 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 821J0ppC 03p C0G 100 820 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - R D E5C 2A 102J0ppC 03p C0G 100 1000 –5% 4.0 x 3.5 2.5 5.0 K1 M1 - R D E5C 2A 102J0ppC 03p C0G 100 1000 –5% 5.0 x 3.5 2.5 2.5 P1 S1 - Tw o blank colum ns are filled w ith the lead style code. Please refer to the 3 colum ns on the right for the appropriate code. The last blank colum n is filled w ith the packaging code. (B: bulk, A: am m o pack) H igh D ielectric C onstant Type, X7R /X7S C haracteristics Part Number Temp. Char. Rated Voltage (Vdc) Capacitance Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) R D ER 71H 221K 0ppC 03p X7R 50 220pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 221K 0ppC 03p X7R 50 220pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 331K 0ppC 03p X7R 50 330pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 331K 0ppC 03p X7R 50 330pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 471K 0ppC 03p X7R 50 470pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 471K 0ppC 03p X7R 50 470pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 681K 0ppC 03p X7R 50 680pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 681K 0ppC 03p X7R 50 680pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 102K 0ppC 03p X7R 50 1000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - Continued on the following page.

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number Temp. Char. Rated Voltage (Vdc) Capacitance Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) Continued from the preceding page. R D ER 71H 102K 0ppC 03p X7R 50 1000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 152K 0ppC 03p X7R 50 1500pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 152K 0ppC 03p X7R 50 1500pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 222K 0ppC 03p X7R 50 2200pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 222K 0ppC 03p X7R 50 2200pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 332K 0ppC 03p X7R 50 3300pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 332K 0ppC 03p X7R 50 3300pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 472K 0ppC 03p X7R 50 4700pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 472K 0ppC 03p X7R 50 4700pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 682K 0ppC 03p X7R 50 6800pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 682K 0ppC 03p X7R 50 6800pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 103K 0ppC 03p X7R 50 10000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 103K 0ppC 03p X7R 50 10000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 153K 0ppC 03p X7R 50 15000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 153K 0ppC 03p X7R 50 15000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 223K 0ppC 03p X7R 50 22000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 223K 0ppC 03p X7R 50 22000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 333K 0ppC 03p X7R 50 33000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 333K 0ppC 03p X7R 50 33000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 473K 0ppC 03p X7R 50 47000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 473K 0ppC 03p X7R 50 47000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 71H 683K 0ppC 03p X7R 50 68000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 71H 683K 0ppC 03p X7R 50 68000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 72A 102K 0ppC 03p X7R 100 1000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 72A 102K 0ppC 03p X7R 100 1000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 72A 152K 0ppC 03p X7R 100 1500pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 72A 152K 0ppC 03p X7R 100 1500pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 72A 222K 0ppC 03p X7R 100 2200pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 72A 222K 0ppC 03p X7R 100 2200pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 72A 332K 0ppC 03p X7R 100 3300pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 72A 332K 0ppC 03p X7R 100 3300pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 72A 472K 0ppC 03p X7R 100 4700pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 72A 472K 0ppC 03p X7R 100 4700pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 72A 682K 0ppC 03p X7R 100 6800pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 72A 682K 0ppC 03p X7R 100 6800pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - Continued on the following page.

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number Temp. Char. Rated Voltage (Vdc) Capacitance Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) Continued from the preceding page. R D ER 72A 103K 0ppC 03p X7R 100 10000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 72A 103K 0ppC 03p X7R 100 10000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 72A 153K 0ppC 03p X7R 100 15000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 72A 153K 0ppC 03p X7R 100 15000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 72A 223K 0ppC 03p X7R 100 22000pF –10% 4.0 x 3.5 2.5 5.0 K1 M1 - R D ER 72A 223K 0ppC 03p X7R 100 22000pF –10% 5.0 x 3.5 2.5 2.5 P1 S1 - R D ER 72A 333K 1ppC 03p X7R 100 33000pF –10% 4.5 x 3.5 3.15 5.0 K1 M1 - R D ER 72A 333K 1ppC 03p X7R 100 33000pF –10% 5.0 x 3.5 3.15 2.5 P1 S1 - R D ER 72A 473K 1ppC 03p X7R 100 47000pF –10% 4.5 x 3.5 3.15 5.0 K1 M1 - R D ER 72A 473K 1ppC 03p X7R 100 47000pF –10% 5.0 x 3.5 3.15 2.5 P1 S1 - R D ER 72A 683K 1ppC 03p X7R 100 68000pF –10% 4.5 x 3.5 3.15 5.0 K1 M1 - R D ER 72A 683K 1ppC 03p X7R 100 68000pF –10% 5.0 x 3.5 3.15 2.5 P1 S1 - R D ER 72E102K 2ppA 11p X7R 250 1000pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E152K 2ppA 11p X7R 250 1500pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E222K 2ppA 11p X7R 250 2200pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E332K 2ppA 11p X7R 250 3300pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E472K 2ppA 11p X7R 250 4700pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E682K 2ppA 11p X7R 250 6800pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E103K 2ppA 11p X7R 250 10000pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E153K 2ppC 11p X7R 250 15000pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E223K 2ppC 11p X7R 250 22000pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E333K 2ppC 11p X7R 250 33000pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E473K 2ppC 11p X7R 250 47000pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72E683K 3ppC 11p X7R 250 68000pF –10% 5.0 x 4.5 3.15 5.0 K1 M1 - R D ER 72J102K 2ppC 11p X7R 630 1000pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72J152K 2ppC 11p X7R 630 1500pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72J222K 2ppC 11p X7R 630 2200pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72J332K 2ppC 11p X7R 630 3300pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72J472K 2ppC 11p X7R 630 4700pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72J682K 2ppC 11p X7R 630 6800pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72J103K 2ppC 11p X7R 630 10000pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - R D ER 72J153K 2ppC 11p X7R 630 15000pF –10% 5.0 x 3.5 3.15 5.0 K1 M1 - Continued on the following page.

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number Temp. Char. Rated Voltage (Vdc) Capacitance Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) Continued from the preceding page. R D ER 72J223K 3ppC 11p X7R 630 22000pF –10% 5.0 x 4.5 3.15 5.0 K1 M1 - R D ER 72J333K 3ppC 11p X7R 630 33000pF –10% 5.0 x 4.5 3.15 5.0 K1 M1 - R D ER 72J473K 3ppC 11p X7R 630 47000pF –10% 5.0 x 4.5 3.15 5.0 K1 M1 - R D ER 72J683K 8ppC 11p X7R 630 68000pF –10% 7.5 x 5.5 3.15 5.0 K1 M1 - Tw o blank colum ns are filled w ith the lead style code. Please refer to the 3 colum ns on the right for the appropriate code. The last blank colum n is filled w ith the packaging code. (B: bulk, A: am m o pack) H igh D ielectric C onstant Type, F/Y5V C haracteristics Part Number Temp. Char. Rated Voltage (Vdc) Capacitance Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) R D EF11H 103Z0ppC 01p F 50 10000pF +80/-20% 4.0 x 3.5 2.5 5.0 K1 M1 - R D EF11H 103Z0ppC 01p F 50 10000pF +80/-20% 5.0 x 3.5 2.5 2.5 P1 S1 - R D EF51H 103Z0ppC 03p Y5V 50 10000pF +80/-20% 4.0 x 3.5 2.5 5.0 K1 M1 - R D EF51H 103Z0ppC 03p Y5V 50 10000pF +80/-20% 5.0 x 3.5 2.5 2.5 P1 S1 - R D EF11H 223Z0ppC 01p F 50 22000pF +80/-20% 4.0 x 3.5 2.5 5.0 K1 M1 - R D EF11H 223Z0ppC 01p F 50 22000pF +80/-20% 5.0 x 3.5 2.5 2.5 P1 S1 - R D EF51H 223Z0ppC 03p Y5V 50 22000pF +80/-20% 4.0 x 3.5 2.5 5.0 K1 M1 - R D EF51H 223Z0ppC 03p Y5V 50 22000pF +80/-20% 5.0 x 3.5 2.5 2.5 P1 S1 - R D EF11H 473Z0ppC 01p F 50 47000pF +80/-20% 4.0 x 3.5 2.5 5.0 K1 M1 - R D EF11H 473Z0ppC 01p F 50 47000pF +80/-20% 5.0 x 3.5 2.5 2.5 P1 S1 - R D EF51H 473Z0ppC 03p Y5V 50 47000pF +80/-20% 4.0 x 3.5 2.5 5.0 K1 M1 - R D EF51H 473Z0ppC 03p Y5V 50 47000pF +80/-20% 5.0 x 3.5 2.5 2.5 P1 S1 - Tw o blank colum ns are filled w ith the lead style code. Please refer to the 3 colum ns on the right for the appropriate code. The last blank colum n is filled w ith the packaging code. (B: bulk, A: am m o pack)

C 49E.pdf M ay.10,2011 R D E Series (O nly for C om m ercial) Specifications and Test M ethods 7 Q/Dissipation Factor (D.F.) 30pF m in.: Q U1,000 30pF m ax.: Q U400+20C C : N om inal capacitance (pF) C har. X7R : 0.025 m ax. C har. F, Y5V: 0.05 m ax. C har. X7S: 0.125 m ax. The capacitance, Q /D .F. should be m easured at 25˚C at the frequency and voltage show n in the table. Tem perature C om pensating Type H igh D ielectric C onstant Type

6 Capacitance W ithin the specified tolerance

The insulation resistance should be m easured w ith a D C voltage not exceeding the rated voltage (D C 500–50V in case of rated vlotage: D C 630V) at norm al tem perature and hum idity and w ithin 2 m in. of charging. (C harge/D ischarge current V 50m A)

5 Insulation

R ated Voltage: D C 25V, D C 50V, D C 100V 10,000M Ω m in. or 500M Ω • µF m in. w hichever is sm aller R ated Voltage: D C 250V, D C 630V 10,000M Ω m in. or 100M Ω • µF m in. w hichever is sm aller The capacitors should not be dam aged w hen test voltages of Table are applied betw een the term inals for 1 to 5 sec. (C harge/D ischarge current V 50m A) Tem perature C om pensating Type H igh D ielectric C onstant Type

4 Dielectric

Terminals N o defects or abnorm alities Body Insulation N o defects or abnorm alities The capacitor is placed in a container w ith m etal balls of 1m m diam eter so that each term inal, short-circuited, is kept approxim ately 2m m from the balls as show n in the figure, and 250% of the rated voltage (200% of the rated voltage in case of rated voltage: D C 100V, D C 250V, D C 630V) is im pressed for 1 to 5 sec. betw een capacitor term inals and m etal balls. (C harge/D ischarge current V 50m A) Visual inspection, Vernier C aliper3 Dimension and Marking See previous pages Visual inspection2 Appearance N o defects or abnorm alities –1 Operating Temperature Range -55 to +125˚C C har. X7R , X7S: -55 to +125˚C C har. F: -25 to +85˚C C har. Y5V: -30 to +85˚C No. Test Method Specifications Temperature Compensating Type High Dielectric Constant Type Item Approx. 2m m M etal balls Capacitance Item CV1000pF 1–0.1M H z AC 0.5 to 5V (r.m .s.) CG1000pF 1–0.1kH z AC 1–0.2V (r.m .s.) Frequency Voltage Capacitance Item CV10µF 1–0.1kH z AC 1–0.2V (r.m .s.) CG10µF 120–24H z AC 0.5–0.1V (r.m .s.) Frequency Voltage Test Voltage 300% of the rated voltage Rated Voltage D C 50V, D C 100V Test Voltage 250% of the rated voltage 200% of the rated voltage 150% of the rated voltage Rated Voltage D C 25V, D C 50V D C 100V, D C 250V D C 630V Continued on the following page. Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 49E.pdf M ay.10,2011 The lead w ire is im m ersed in the m elted solder 1.5m m to 2m m from the m ain body at 350–10°C for 3.5–0.5 sec. The specified item s are m easured after 24–2 hrs.

• Pretreatm ent (for high dielectric constant type) Perform a heat treatm ent at 150+0/-10°C for 1 hr., and then let sit at room tem perature for 24–2 hrs. Resistance to Soldering Heat Appearance N o defects or abnorm alities Capacitance Change W ithin –2.5% or –0.25pF (w hichever is larger) C har. X7R , X7S: W ithin –10% C har. F, Y5V: W ithin –20% Dielectric Strength (Between Terminals) N o defects The term inal of a capacitor is dipped into a 25% ethanol (JIS-K-8101) solution of rosin (JIS-K-5902) and then into m olten solder for 2–0.5 sec. In both cases the depth of dipping is up to about 1.5m m to 2m m from the term inal body. Tem p. of solder:245–5˚C Lead Free Solder (Sn-3.0Ag-0.5C u) 235–5˚C H 60A or H 63A Eutectic Solder

11 Solderability of Leads Lead w ire should be soldered w ith uniform coating on the axial

direction over 3/4 of the circum ferential direction. The capacitor is soldered securely to a supporting term inal and a 10 to 55H z vibration of 1.5m m peak- peak am plitude is applied for 6 hrs. total, 2 hrs. in each m utually perpendicular direction. Allow 1 m in. to cycle the frequency from 10H z to 55H z and the converse.

10 Vibration

Appearance N o defects or abnorm alities Capacitance W ithin the specified tolerance Q/D.F. 30pF m in.: Q U1,000 30pF m ax.: Q U400+20C C : N om inal capacitance (pF) C har. X7R : 0.025 m ax. C har. F, Y5V: 0.05 m ax. C har. X7S: 0.125 m ax. As in the figure, fix the capacitor body, apply the force gradually to each lead in the radial direction of the capacitor until reaching 10N and then keep the force applied for 10–1 sec.

9 Terminal

Strength Term ination not to be broken or loosened Bending Strength Term ination not to be broken or loosened Each lead w ire should be subjected to a force of 2.5N and then bent 90° at the point of egress in one direction. Each w ire is then returned to the original position and bent 90° in the opposite direction at the rate of one bend per 2 to 3 sec. F The capacitance change should be m easured after 5 m in. at each specified tem perature stage. (1) Tem perature C om pensating Type The tem perature coefficient is determ ined using the capacitance m easured in step 3 as a reference. W hen cycling the tem perature sequentially from step 1 through 5 (-55 to +125˚C ) the capacitance should be w ithin the specified tolerance for the tem perature coefficient and capacitance change as show n in Table A. The capacitance drift is calculated by dividing the differences betw een the m axim um and m inim um m easured values in step 1, 3 and 5 by the cap. value in step 3. (2) H igh D ielectric C onstant Type The ranges of capacitance change com pared w ith the 25˚C (C har. F: 20˚C ) value over the tem perature ranges as show n in Table B should be w ithin the specified ranges.

• Pretreatm ent (for high dielectric constant type) Perform a heat treatm ent at 150+0/-10°C for 1 hr., and then let sit at room tem perature for 24–2 hrs. Capacitance Temperature Characteristics Capacitance Change W ithin the specified tolerance (Table A on last colum n) W ithin the specified tolerance (Table B on last colum n) Temperature Coefficient W ithin the specified tolerance (Table A on last colum n) Capacitance Drift W ithin –0.2% or –0.05pF, w hichever is larger Step Temperature (˚C) 25–2 -55–3 25–2 125–3 25–2 Continued from the preceding page. Continued on the following page. R D E Series (O nly for C om m ercial) Specifications and Test M ethods No. Test Method Specifications Temperature Compensating Type High Dielectric Constant Type Item Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 49E.pdf M ay.10,2011 The capacitor should be fully im m ersed, unagitated, in reagent at 20 to 25°C for 30–5 sec. and then rem oved gently. M arking on the surface of the capacitor should im m ediately be visually exam ined. R eagent:

• Isopropyl alcohol

17 Solvent

Appearance N o defects or abnorm alities Marking Legible Char. Nominal Values (ppm/°C) *1 0–30C 0G Max. 0.58 Min. –0.24 Max. 0.40 Min. –0.17 Max. –55°C Capacitance Change from 25°C (%) –30°C –10°C 0.25 Min. –0.11 *1:N om inal values denote the tem perature coefficient w ithin a range of 25 to 125°C Table A Char. X7R X7S Y5V F –55 to +125°C –30 to + 85°C –25 to + 85°C 25°C 20°C Temp. Range Reference Temp. Cap. Change Rate W ithin –15% W ithin –22% W ithin +22 –82% W ithin +30 –80% Table B Apply voltage in Table for 1000+48 – 0 hrs. at the m axim um operating tem perature–3°C . R em ove and set for 24–2 hrs. at room tem perature, then m easure. (C harge/D ischarge current V50m A)

• Pretreatm ent (for high dielectric constant type) Appy test voltage for 1 hr., at test tem perature. R em ove and set for 24–2 hrs. at room tem perature. High Temperature Load Appearance N o defects or abnorm alities Q/D.F. 30pF m in.: Q U350 10pF to 30pF: Q U275+5C /2 10pF m ax.: Q U200+10C C : N om inal capacitance (pF) C har. X7R : 0.05 m ax. C har. F, Y5V: 0.075 m ax. C har. X7S: 0.2 m ax. Capacitance Change W ithin –3% or –0.3pF (w hichever is larger) C har. X7R , X7S: W ithin –15% C har. F, Y5V: W ithin –30% Insulation Resistance R ated Voltage: D C 25V, D C 50V, D C 100V 1,000M Ω , 50M Ω • µF m in. (w hichever is sm aller) R ated Voltage: D C 250V, D C 630V 1,000M Ω , 10M Ω • µF m in. (w hichever is sm aller) Apply the rated voltage for 500+24 – 0 hrs. at 40–2°C and in 90 to 95% hum idity. R em ove and set for 24–2 hrs. at room tem perature, then m easure. (C harge/D ischarge current V50m A)
• Pretreatm ent (for high dielectric constant type) Perform a heat treatm ent at 150+0/-10°C for 1 hr., and then let sit at room tem perature for 24–2 hrs.

15 Humidity

Appearance N o defects or abnorm alities Q/D.F. 30pF m in.: Q U200 30pF m ax.: Q U100+10C /3 C : N om inal capacitance (pF) C har. X7R : 0.05 m ax. C har. F, Y5V: 0.075 m ax. C har. X7S: 0.2 m ax. Capacitance Change W ithin –7.5% or –0.75pF (w hichever is larger) C har. X7R , X7S: W ithin –15% C har. F, Y5V: W ithin –30% Insulation Resistance R ated Voltage: D C 25V, D C 50V, D C 100V 500M Ω or 25M Ω • µF m in. (w hichever is sm aller) R ated Voltage: D C 250V, D C 630V 1,000M Ω or 10M Ω • µF m in. (w hichever is sm aller) Set the capacitor at 40–2°C and relative hum idity of 90 to 95% for 500+24 – 0 hrs. R em ove and set for 24–2 hrs. at room tem perature, then m easure.

• Pretreatm ent (for high dielectric constant type) Perform a heat treatm ent at 150+0/-10°C for 1 hr., and then let sit at room tem perature for 24–2 hrs. Humidity (Steady State) Appearance N o defects or abnorm alities Q/D.F. 30pF m in.: Q U350 10pF to 30pF: Q U275+5C /2 10pF m ax.: Q U200+10C C : N om inal capacitance (pF) C har. X7R : 0.05 m ax. C har. F, Y5V: 0.075 m ax. C har. X7S: 0.2 m ax. Capacitance Change W ithin –5% or –0.5pF (w hichever is larger) C har. X7R , X7S: W ithin –15% C har. F, Y5V: W ithin –30% Insulation Resistance R ated Voltage: D C 25V, D C 50V, D C 100V 1,000M Ω , 50M Ω • µF m in. (w hichever is sm aller) R ated Voltage: D C 250V, D C 630V 1,000M Ω , 10M Ω • µF m in. (w hichever is sm aller) The capacitor should be subjected to 5 tem perature cycles. R em ove and set for 24–2 hrs. at room tem perature, then m easure.
• Pretreatm ent (for high dielectric constant type) Perform a heat treatm ent at 150+0/-10°C for 1 hr., and then let sit at room tem perature for 24–2 hrs.

13 Temperature

Appearance N o defects or abnorm alities Insulation Resistance R ated Voltage: D C 25V, D C 50V, D C 100V 1,000M Ω , 50M Ω • µF m in. (w hichever is sm aller) R ated Voltage: D C 250V, D C 630V 1,000M Ω , 10M Ω • µF m in. (w hichever is sm aller) Q/D.F. 30pF m in.: Q U350 10pF to 30pF: Q U275+5C /2 10pF m ax.: Q U200+10C C : N om inal capacitance (pF) C har. X7R : 0.05 m ax. C har. F, Y5V: 0.075 m ax. C har. X7S: 0.2 m ax. Capacitance Change W ithin –5% or –0.5pF (w hichever is larger) C har. X7R , X7S: W ithin –12.5% C har. F, Y5V: W ithin –30% Dielectric Strength (Between Terminals) N o defects or abnorm alities Continued from the preceding page. R D E Series (O nly for C om m ercial) Specifications and Test M ethods No. Test Method Specifications Temperature Compensating Type High Dielectric Constant Type Item Test Voltage 150% of the rated voltage 120% of the rated voltage Rated Voltage D C 25V, D C 50V D C 100V, D C 250V D C 630V Step Temperature (˚C) Time (min) M in. O perating Tem p. –3 R oom Tem p. M ax. O perating Tem p. –3 R oom Tem p. 30–3 3 m ax. 30–3 3 m ax. Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Radial Lead Type Monolithic Ceramic Capacitors R D E Series Large C apacitance and H igh A llow able R ipple C urrent (For C om m ercial U se O nly) (D C 250V-D C 630V) (in m m ) ∗ C oating extension does not exceed the end of the lead bend.
• Lead W ire : Solder C oated C opper W ire or Solder C oated C P W ire ød : 0.5–0.05 T m ax.L m ax. W m ax.25.0 m in. W 1 m ax. F–0.8 Dimensions code: 2/3/8 Lead style code: K1 (in m m ) T m ax.L m ax. ød : 0.5–0.05 W m ax.25.0 m in. 1.5 m ax. F–0.8
• Lead W ire : Solder C oated C opper W ire or Solder C oated C P W ire Dimensions code: 5 Lead style code: B1 (in m m ) L m ax. 2.0 m ax. F–0.8 W m ax.25.0 m in. T m ax.
• Lead W ire : Solder C oated C opper W ire or Solder C oated C P W ire ød : 0.5–0.05 Dimensions code: U Lead style code: B1 n Dimensions Dimensions and Lead Style Code DC Rated Voltage Dimensions (mm) L W W1 T F d 2K 1/2M 1 3K 1/3M 1 5B 1/5E1 8K 1/8M 1 U B 1/U E1 0.5 0.5 0.5 0.5 0.5 5.0 5.0 5.0 5.0 5.0 6.0 7.5 8.0 4.0 5.0 7.5* 5.5 12.5* 5.5 5.5 7.5 7.5 7.7 250V/450V/630V 250V/450V/630V 250V/450V/630V 250V/450V/630V 250V/450V/630V See the individual product specifications *D C 630V: W +0.5m m Continued on the following page. n Features 1. H igher capacitance w ith D C -Bias; approxim ately 40% higher than X7R under loaded rated voltage. 2. Applicable for use as a D C sm oothing capacitor in LED Bulb Lighting circuits after the bridge rectifier circuit AC 100V input: 250V rating type m axim um capacitance of X7T, 250V is 2.2 m icro F though X7R , 630V is 0.47 m icro F. AC 200V input: 450V rating type m axim um capacitance of X7T, 450V is 1.2 m icro F though X7R , 630V is 0.47 m icro F. 3. Allow able higher ripple current 4. R educes acoustic noise Approxim ately 15dB reduction in com parison to leaded X7R characteristics parts. Approxim ately 30dB reduction in com parison to SM D X7T characteristics part because the contact area is sm aller than a SM D . 5. M axim um capacitance is doubled by the dual chip structure in the leaded com ponent construction. n Applications 1. D C sm oothing capacitor for LED bulb 2. PFC capacitor for general use SM PS 3. R eplace Al-E capacitor for long-life equipm ent

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Continued from the preceding page. n Marking Rated Voltage Temp. Char.Dimensions Code 3, 8 DC450V X7T DC630V Temperature Characteristics Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification M arked w ith 3 figures M arked w ith code M arked w ith code (X7T char.: 7) M arked w ith code (D C 250V: 4, D C 450V: 9, D C 630V: 7) MM arked w ith 5, U DC250V 153 K97M 153 K77M683 K47M 334 K47 M 104 K97 M 223 K77 M 225 M 47 M 474 K97 M 474 M 77 M H igh D ielectric C onstant Type, X7T C haracteristics Part Number Temp. Char. Rated Voltage (Vdc) Capacitance Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) R D ED 72E333K 2ppC 11p X7T 250 33000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72E473K 2ppC 11p X7T 250 47000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72E683K 2ppC 11p X7T 250 68000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72W 103K 2ppC 11p X7T 450 10000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72W 153K 2ppC 11p X7T 450 15000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72W 223K 2ppC 11p X7T 450 22000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72W 333K 2ppC 11p X7T 450 33000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72W 473K 2ppC 11p X7T 450 47000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72W 683K 3ppC 11p X7T 450 68000pF –10% 5.5 x 5.0 4.0 5.0 K1 M1 - R D ED 72J103K 2ppC 11p X7T 630 10000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72J153K 2ppC 11p X7T 630 15000pF –10% 5.5 x 4.0 3.15 5.0 K1 M1 - R D ED 72J223K 3ppC 11p X7T 630 22000pF –10% 5.5 x 5.0 4.0 5.0 K1 M1 - R D ED 72J333K 3ppC 11p X7T 630 33000pF –10% 5.5 x 5.0 4.0 5.0 K1 M1 - R D ED 72J473K 3ppC 11p X7T 630 47000pF –10% 5.5 x 5.0 4.0 5.0 K1 M1 - R D ED 72J683K 8ppC 11p X7T 630 68000pF –10% 7.5 x 5.5 4.0 5.0 K1 M1 - Continued on the following page.

C 49E.pdf M ay.10,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number Temp. Char. Rated Voltage (Vdc) Capacitance Dimensions LxW (mm) Dimension T (mm) Lead Space F (mm) Lead Style Code Bulk Lead Style Code Taping (1) Lead Style Code Taping (2) Continued from the preceding page. Tw o blank colum ns are filled w ith the lead style code. Please refer to the 3 colum ns on the right for the appropriate code. The last blank colum n is filled w ith the packaging code. (B: bulk, A: am m o pack)

C 49E.pdf M ay.10,2011 The capacitor should be firm ly soldered to the supporting lead w ire and vibrated at a frequency range of 10 to 55H z, 1.5m m in total am plitude, w ith about a 1 m inute rate of vibration change from 10H z to 55H z and back to 10H z. Apply for a total of 6 hrs., 2 hrs. each in 3 m utually perpendicular directions. Appearance N o defects or abnorm alities As in the figure, fix the capacitor body, apply the force gradually to each lead in the radial direction of the capacitor until reaching 10N and then keep the force applied for 10T1 sec. Strength Term ination not to be broken or loosened The capacitance change should be m easured after 5 m in. at each specified tem perature stage. Capacitance Temperature Characteristics W ithin +22/-33% 7 Dissipation Factor (D.F.) 0.01 m ax. The capacitance/D .F. should be m easured at the frequency of 1T0.1kH z and a voltage of The insulation resistance should be m easured w ith D C 500–50V (D C 250–25V in case of rated voltage: D C 250V,D C 450V) at norm al tem perature and hum idity and w ithin 2 m in. of charging. (C harge/D ischarge current V 50m A) Terminals M ore than 10,000M Ω or 100M Ω · µF, W hichever is sm aller The capacitor should not be dam aged w hen voltage in Table is applied betw een the term inations for 1 to 5 sec. (C harge/D ischarge current V 50m A) Terminals N o defects or abnorm alities Visual inspection, Vernier C aliper3 Dimension and Marking See previous pages Visual inspection2 Appearance N o defects or abnorm alities –1 Operating Temperature Range -55 to +125˚C No. Test MethodSpecificationsItem Continued on the following page. D.F. 0.01 m ax. Capacitance W ithin the specified tolerance Each lead w ire should be subjected to a force of 2.5N and then bent 90˚ at the point of egress in one direction. Each w ire is then returned to the original position and bent 90˚ in the opposite direction at the rate of one bend per 2 to 3 sec. Bending Strength Term ination not to be broken or loosened The capacitor is placed in a container w ith m etal balls of 1m m diam eter so that each term inal, short-circuit, is kept approxim ately 2m m from the balls as show n in the figure, and 200% of the rated D C voltage is im pressed for 1 to 5 sec. betw een capacitor term inals and m etal balls. (C harge/D ischarge current V 50m A) Body Insulation N o defects or abnorm alities R D E Series Large C apacitance and H igh A llow able R ipple C urrent (O nly for C om m ercial U se) Specifications and Test M ethods Approx. 2m m M etal balls F Temperature (˚C)Step 25T2 -55T3 25T2 125T3 25T2 Test VoltageRated Voltage 200% of the rated voltage 150% of the rated voltage 120% of the rated voltage D C 250V D C 450V D C 630V Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 49E.pdf M ay.10,2011 The capacitor should be fully im m ersed, unagitated, in reagent at 20 to 25 ˚C for 30T5 sec. and then rem oved gently. M arking on the surface of the capacitor should im m ediately be visually exam ined. R eagent :

• Isopropyl alcohol

Appearance N o defects or abnorm alities Apply voltage in Table for 1000 WY480 hrs. at the m axim um operating tem perature. R em ove and set for 24T2 hrs. at room tem perature, then m easure. (C harge/D ischarge current V 50m A)

• Pretreatm ent Apply test voltage for 1 hr., at test tem perature. R em ove and set for 24T2 hrs. at room tem perature. High Temperature Load Appearance N o defects or abnorm alities Apply the rated voltage at 40T2˚C and relative hum idity of 90 to 95% for 500 WY240 hrs. R em ove and set for 24T2 hrs. at room tem perature, then m easure. (C harge/D ischarge current V 50m A)
• Pretreatm ent Perform a heat treatm ent at 150+0/-10˚C for 1 hr., and then let sit at room tem perature for 24T2 hrs.

Appearance N o defects or abnorm alities Set the capacitor at 40T2˚C and relative hum idity of 90 to 95% for 500 WY240 hrs. R em ove and set for 24T2 hrs. at room tem perature, then m easure.

• Pretreatm ent Perform a heat treatm ent at 150+0/-10˚C for 1 hr., and then let sit at room tem perature for 24T2 hrs. Humidity (Steady State) Appearance N o defects or abnorm alities The capacitor should be subjected to 5 tem perature cycles.

Appearance N o defects or abnorm alities The lead w ire is im m ersed in the m elted solder 1.5 to 2m m from the m ain body at 350T10˚C for 3.5T0.5 sec. The specified item s are m easured after 24T2 hrs.

• Pretreatm ent Perform a heat treatm ent at 150+0/-10˚C for 1 hr., and then let sit at room tem perature for 24T2 hrs. Resistance to Soldering Heat Appearance N o defects or abnorm alities The term inal of a capacitor is dipped into a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in w eight proportion) and then into m olten solder (JIS- Z-3282) for 2T0.5 sec. In both cases the depth of dipping is up to about 1.5 to 2m m from the term inal body. Tem p. of solder: 245T5˚C Lead Free Solder (Sn-3.0Ag-0.5C u) 235T5˚C H 60A or H 63A Eutectic Solder

direction over 3/4 of the circum ferential direction. No. Test MethodSpecificationsItem Continued from the preceding page. Marking Legible Insulation Resistance M ore than 1,000M Ω or 10M Ω · µF (W hichever is sm aller) D.F. 0.02 m ax. Capacitance Change W ithin T12.5% Insulation Resistance M ore than 1,000M Ω or 10M Ω · µF (W hichever is sm aller) D.F. 0.02 m ax. Capacitance Change W ithin T12.5% Insulation Resistance M ore than 1,000M Ω or 10M Ω · µF (W hichever is sm aller) D.F. 0.02 m ax. Capacitance Change W ithin T12.5% Dielectric Strength (Between Terminals) N o defects or abnorm alities Insulation Resistance M ore than 10,000M Ω or 100M Ω · µF (W hichever is sm aller) D.F. 0.01 m ax. Capacitance Change W ithin T7.5% Dielectric Strength (Between Terminals) N o defects Capacitance Change W ithin T10% R D E Series Large C apacitance and H igh A llow able R ipple C urrent (O nly for C om m ercial U se) Specifications and Test M ethods

• Pretreatm ent Perform a heat treatm ent at 150+0/-10˚C for 1 hr., and then let sit at room tem perature for 24T2 hrs. Temperature (˚C)Step -55T3 R oom Tem p. 125T3 R oom Tem p. Time (min) 30T3 3 m ax. 30T3 3 m ax. Test VoltageRated Voltage 150% of the rated voltage 130% of the rated voltage 120% of the rated voltage D C 250V D C 450V D C 630V Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Murata: RDER72H152K2K1C11B RDER72H222K2K1C11B RDER72H332K2K1C11B RDER72H472K2K1C11B RDER72H682K2K1C11B RDER72D153K2K1C11B RDER72H153K2K1C11B RDER72D474K5B1C13B RDER72H474MUB1C13B RDER72J474MUB1C13B RDER72E102K2K1A11B RDER72E102K2M1A11A RDER72E103K2K1A11B RDER72E103K2M1A11A RDER72E104K3K1C11B RDER72E104K3M1C11A RDER72E105MUB1C13B RDER72E105MUE1C13A RDER72E152K2K1A11B RDER72E152K2M1A11A RDER72E153K2K1C11B RDER72E153K2M1C11A RDER72E154K8K1C11B RDER72E154K8M1C11A RDER72E222K2K1A11B RDER72E222K2M1A11A RDER72E223K2K1C11B RDER72E223K2M1C11A RDER72E224K8K1C11B RDER72E224K8M1C11A RDER72E332K2K1A11B RDER72E332K2M1A11A RDER72E333K2K1C11B RDER72E333K2M1C11A RDER72E334K5B1C13B RDER72E334K5E1C13A RDER72E472K2K1A11B RDER72E472K2M1A11A RDER72E473K2K1C11B RDER72E473K2M1C11A RDER72E474K5B1C13B RDER72E474K5E1C13A RDER72E682K2K1A11B RDER72E682K2M1A11A RDER72E683K3K1C11B RDER72E683K3M1C11A RDER72J102K2K1C11B RDER72J102K2M1C11A RDER72J103K2K1C11B RDER72J103K2M1C11A RDER72J104K8M1C11A RDER72J152K2K1C11B RDER72J152K2M1C11A RDER72J153K2K1C11B RDER72J153K2M1C11A RDER72J154K5B1C13B RDER72J154K5E1C13A RDER72J222K2K1C11B RDER72J222K2M1C11A RDER72J223K3K1C11B RDER72J223K3M1C11A RDER72J224K5B1C13B RDER72J224K5E1C13A RDER72J332K2K1C11B RDER72J332K2M1C11A RDER72J333K3K1C11B RDER72J333K3M1C11A RDER72J472K2K1C11B RDER72J472K2M1C11A RDER72J473K3K1C11B RDER72J473K3M1C11A RDER72J474MUE1C13A RDER72J682K2K1C11B RDER72J682K2M1C11A RDER72J683K8K1C11B RDER72J683K8M1C11A RDER72J104K8K1C11B RDER72H102K2K1C11B RDER72D103K2K1A11B RDER72H224K5B1C13B RDER72D224K8K1C11B RDEC71E105K0K1C03B RDEC71E106K2K1C03B RDEC71E224K0K1C03B RDEC71E225K1K1C03B RDEC71E226K3K1C03B RDEC71E474K0K1C03B RDEC71E475K2K1C03B RDEC71H475K2K1C03B RDEE41H104M0K1C03B RDEE41H105M2K1C03B RDEE41H155M2K1C03B RDEE41H224M0K1C03B RDEE41H225M2K1C03B RDEE41H335M3K1C03B RDEE41H474M1K1C03B RDEE41H475M2K1C03B RDEF51H103Z0K1C03B RDEF51H104Z0K1C03B RDEF51H153Z0K1C03B