RD74LVC32BFPEL

RD74LVC32B RENESAS | Alldatasheet

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Features

• VCC = 1.65 V to 5.5 V
• All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±4 mA (@V CC = 1.65 V) ±8 mA (@VCC = 2.3 V) ±12 mA (@VCC = 2.7 V) ±24 mA (@VCC = 3.0 V to 5.5 V)
• Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) RD74LVC32BFPEL SOP–14 pin (JEITA) FP–14DAV FP EL (2,000 pcs/reel) RD74LVC32BTELL TSSOP–14 pin TTP–14DV T ELL (2,000 pcs/reel) Function Table Inputs AB Output Y LLL HL H LH H HHH H : High level L : Low level

Rev.1.00, May 11, 2004, page 2 of 7 Pin Arrangement (Top view)

14 VCC

Item Symbol Ratings Unit Conditions Supply voltage V CC –0.5 to 7.0 V Input diode current I IK –50 mA V I = –0.5 V Input voltage V I –0.5 to 7.0 V –50 mA V O = –0.5 VOutput diode current I OK 50 mA V O = VCC+0.5 V Output voltage V O –0.5 to VCC+0.5 V Output current I O ±50 mA VCC, GND current / pin I CC or IGND 100 mA Storage temperature Tstg –65 to +150 °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time.

Rev.1.00, May 11, 2004, page 3 of 7 Recommended Operating Conditions Item Symbol Ratings Unit Conditions 1.5 to 5.5 Data holdSupply voltage V CC 1.65 to 5.5 V At operation VI 0 to 5.5 A, BInput / Output voltage VO 0 to VCC V Y Operating temperature Ta –40 to 85 °C –4 V CC = 1.65 V –8 V CC = 2.3 V –12 V CC = 2.7 V IOH –24 V CC = 3.0 V to 5.5 V 4V CC = 1.65 V 8V CC = 2.3 V 12 V CC = 2.7 V Output current IOL mA VCC = 3.0 V to 5.5 V 20 V CC = 1.65 V to 2.7 VInput rise / fall time*1 tr, tf ns/V VCC = 3.0 V to 5.5 V Notes: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics.

Rev.1.00, May 11, 2004, page 4 of 7

Electrical Characteristics

Ta = –40 to 85°C Item Symbol V CC (V) Min Max Unit Test Conditions 1.65 to 1.95 V CC×0.65 — 2.3 to 2.7 1.7 — 2.7 to 3.6 2.0 — VIH 4.5 to 5.5 V CC×0.7 — 1.65 to 1.95 — V CC×0.35 2.3 to 2.7 — 0.7 2.7 to 3.6 — 0.8 Input voltage VIL 4.5 to 5.5 — V CC×0.3 V 1.65 to 5.5 V CC–0.2 — I OH = –100 µA 1.65 1.2 — I OH = –4 mA 2.3 1.7 — I OH = –8 mA 2.7 2.2 — 3.0 2.4 — IOH = –12 mA 3.0 2.2 — VOH 4.5 3.8 — IOH = –24 mA 1.65 to 5.5 — 0.2 I OL = 100 µA 1.65 — 0.45 I OL = 4 mA 2.3 — 0.7 I OL = 8 mA 2.7 — 0.4 I OL = 12 mA 3.0 — 0.55 Output voltage VOL 4.5 — 0.55 V IOL = 24 mA Input current I IN 0 to 5.5 — ±5.0 µA V IN = 5.5 V or GND 2.7 to 5.5 — 5.0 V IN = VCC or GND Quiescent supply current ∆ICC 2.7 to 3.6 — 500 µA VIN = one input at (VCC–0.6)V, other inputs at VCC or GND

Rev.1.00, May 11, 2004, page 5 of 7 Switching Characteristics Ta = –40 to 85°C Item Symbol V CC (V) Min Typ Max Unit From (Input) To (Output) 1.8±0.15 1.0 — 8.7 2.5±0.2 1.0 — 5.4 2.7 1.0 — 4.4 3.3±0.3 1.0 — 3.8 Propagation delay time t PLH tPHL 5.0±0.5 1.0 — 3.5 ns A or B Y 1.8±0.15 — — — 2.5±0.2 — — — 2.7 — — — 3.3±0.3 — — 1.0 Between output pins skew*1 tOSLH tOSHL 5.0±0.5 — — 1.0 ns Input capacitance C IN 3.3 — 5.0 — pF Note: 1. This parameter is c haracterized but not tested. tOSLH = |tPLHm – tPLHn|, tOSHL = |tPHLm – tPHLn| Operating Characteristics Ta = 25°C Item Symbol V CC (V) Min Typ Max Unit Test conditions 1.8 — 10 — 2.5 — 12 — 3.3 — 12 — Power dissipation Capacitance C PD 5.0 — 15 — pF f = 10 MHz

Rev.1.00, May 11, 2004, page 6 of 7 Test Circuit Input Pulse Generator Z = 50out Ω VCC Output C L R L Note: 1. C L includes probe and jig capacitance. Waveforms tPLH tPHL VOH VOL Input A or B 10 % GND 90 % tr tf 90 % 10 % Output Y VIH VrefVref Vref Vref 1.5 V 1.5 V Vref CL RL 1/2 VCC 30 pF 1.0 k Ω 500 Ω 500 Ω 500 Ω 500 Ω 30 pF 50 pF 50 pF 50 pF 1/2 VCC 1/2 VCC 2.7 V 2.7 V INPUTS VCC VCC VCC VIH tr/tf VCC = 1.8±0.15 V VCC = 2.5±0.2 V VCC = 3.3±0.3 V VCC = 5.0±0.5 V VCC = 2.7 V VCC (V) ≤ 2 ns ≤ 2 ns ≤ 2.5 ns ≤ 2.5 ns ≤ 2.5 ns Note: 1. Input waveform : PRR = 10 MHz, duty cycle 50%.

Rev.1.00, May 11, 2004, page 7 of 7 Package Dimensions Package Code JEDEC JEITA Mass (reference value) FP-14DAV Conforms 0.23 g *Ni/Pd/Au plating *0.20 ± 0.05 *0.40 ± 0.06 0.70 ± 0.20 0.12 0.15 0˚ – 8˚ M 0.10 ± 0.10

2.20 Max

5.5 10.06

1.42 Max

10.5 Max

+ 0.20 – 0.307.80 1.15 1.27 As of January, 2003 Unit: mm Package Code JEDEC JEITA Mass (reference value) TTP-14DV 0.05 g *Ni/Pd/Au plating 0.50 ± 0.100˚ – 8˚ *0.15 ± 0.05 6.40 ± 0.20 0.10

1.10 Max

0.13 M 0.65 14 8 4.40 5.00

5.30 Max

0.83 Max

*0.20 ± 0.05 0.07+0.03 –0.04 1.0 As of January, 2003 Unit: mm

Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 RENESAS SALES OFFICES © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. C olophon .1.0