RD7137-10-6M6

RD5122-6-9M6 SCHAFFNER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

DATASHEET Common-mode Chokes RD series Current-compensated Chokes Rated currents from 6 to 64 A Up to 600 VAC or 850 VDC DC to 400 Hz frequencies Dual, triple and quad-choke configurations Technical specifications Maximum continuous operating voltage 600 VAC/850 VDC @ 40°C Operating frequency DC to 400 Hz Rated currents 6 to 64 A @ 40°C max. High potential test voltage winding-to-winding 2500 V, 50 Hz, 2 sec, factory test

2500 VAC, 60 sec, guaranteed

winding-to-housing 4000 VAC, 60 sec, guaranteed Surge current @ 10 msec 20 x IN @ 25 °C Temperature range (operation and storage) -25°C to +110°C (25/110/21) Flammability corresponding to UL 94 V-0 (insulation tubes UL 94 V-2) MTBF @ 40°C/230 V (Mil-HB-217F) >5,000,000 hours Approvals & Compliances RD chokes are attenuating common-mode or asymmetric (P/N –> E) interference signals, by being connected in series with the phase and neutral lines of an AC powerline input. Symmetrical components of the noise are also attenuated by the leakage inductance of the windings. These chokes are typically used in conjunction with suppression capacitors. Features and benefits High saturation resistance and excellent thermal behavior Through hole or wire connections Dual, triple and quad-choke configuration Up to 64 A quad configuration Multiple housing options Custom-specific versions are available on request Typical applications Phase-angle control circuits in combination with saturating chokes EMI input filters For suppressing equipment with no earth connection Suppressing high interference levels Typical electrical schematic

2 EMC/EMI Products Schaffner Group Datasheets 05 May 2020

Choke Buy Nominal current Inductance Resistance Choke Input/Output Pin footprint Weight @ 40°C L R configuration connections connections [A] [mH/path] [mΩ/path] [Qty] [mm] [g] RD5122-6-9m6 6 9.6 52.55 2 -02 Ø1 160 RD5122-10-6m0 10 6 24.25 2 -02 Ø1.3 160 RD5122-16-2m0 16 2 9.5 2 -02 Ø1.6 160 RD5132-6-5m0 6 5 38 3 -02 Ø1 160 RD5132-10-3m0 10 3 17.6 3 -02 Ø1.3 160 RD5132-16-1m0 16 1 6.9 3 -02 Ø1.6 160 RD6127-6-15m0 6 15 66.65 2 -07 Ø1 235 RD6127-10-9m0 10 9 25.9 2 -07 Ø1.5 235 RD6127-16-3m0 16 3 10.9 2 -07 Ø1.8 235 RD6137-6-7m5 6 7.5 49 3 -07 Ø1 235 RD6137-10-4m5 10 4.5 18.35 3 -07 Ø1.5 235 RD6137-16-1m5 16 1.5 8.3 3 -07 Ø1.8 235 RD7127-6-25m0 6 25 84.2 2 -07 Ø1 320 RD7127-10-14m0 10 14 33.5 2 -07 Ø1.4 350 RD7127-16-5m7 16 5.7 14.1 2 -07 Ø1.8 370 RD7127-25-2m8 25 2.8 6.4 2 -07 Ø2.4 400 RD7127-36-1m0 36 1 3.3 2 -07 Ø2.7 380 RD7137-6-12m0 6 12 60.6 3 -07 Ø1 340 RD7137-10-6m6 10 6.6 21.9 3 -07 Ø1.5 380 RD7137-16-2m8 16 2.8 10.7 3 -07 Ø1.8 380 RD7137-25-1m3 25 1.3 4.45 3 -07 Ø2.5 440 RD7137-36-0m5 36 0.5 2.75 3 -07 Ø2.7 400 RD7147-6-6m0 6 6 45.1 4 -07 Ø1 320 RD7147-10-3m5 10 3.5 19.1 4 -07 Ø1.4 370 RD7147-16-1m5 16 1.5 8.5 4 -07 Ø1.8 390 RD7147-25-0m7 25 0.7 3.65 4 -07 Ø2.4 430 RD7147-36-0m2 36 0.2 2.3 4 -07 Ø2.5 400 RD8127-16-12m0 16 12 20.05 2 -07 Ø2 590 RD8127-25-5m0 25 5 8.45 2 -07 Ø2.4 630 RD8127-36-3m0 36 3 4.55 2 -07 1.5 x 4.5 690 RD8127-50-1m0 50 1 2.5 2 -07 1.7 x 5 640 RD8127-64-0m8 64 0.8 1.6 2 -07 2.5 x 5 710 RD8137-16-5m0 16 5 11.6 3 -07 Ø2 630 RD8137-25-2m5 25 2.5 6.4 3 -07 Ø2.4 650 RD8137-36-1m5 36 1.5 3.65 3 -07 1.5 x 4.5 720 RD8137-50-0m6 50 0.6 2.15 3 -07 1.7 x 5 700 RD8137-64-0m5 64 0.5 1.35 3 -07 2.5 x 5 780 RD8147-16-3m0 16 3 9.25 4 -07 Ø2 650 RD8147-25-1m3 25 1.3 5.05 4 -07 Ø2.4 650 RD8147-36-0m8 36 0.8 3 4 -07 1.5 x 4.5 760 RD8147-50-0m3 50 0.3 1.75 4 -07 1.7 x 5 740 RD8147-64-0m2 64 0.2 1.1 4 -07 2.5 x 5 820 Test conditions: Measuring frequency: 1 kHz; 500 μA >0.16 mH >1.6 mH; 50 μA >1.6 mH <160 mH Inductance tolerance: +50%, -30% Resistance tolerance: ±15% @ 25 °C Electrical characteristics @ 25°C: ±2°C

3 EMC/EMI Products Schaffner Group Datasheets 05 May 2020

Up-to-date inventory levels for global distributors is available at https://products.schaffner.com/stock Typical choke attenuation/resonance frequency characteristics Per CISPR 17; 50 Ω/50 Ω asym RD 51x2 RD 61x7 RD 7127 RD 7137 RD 7147 RD 8127 RD 8137 RD 8147 Typical saturation characteristics Inductance (typical value in %) vs. nominal current (A DC) RD 51x2 RD 61x7 RD 71x7 RD 81x7

4 EMC/EMI Products Schaffner Group Datasheets 05 May 2020

RD 6127, RD 7127, RD 8127 RD 6137, RD 7137, RD 8137 RD 7147, RD 8147 Dimensions RD 5122 RD 5132 RD 6127 RD 6137 RD 7127 RD 7137 RD 7147 RD 8127 RD 8137 RD 8147 Tolerances A 50 50 60 60 70 70 70 80 80 80 ±0.5 C 35 35 35 35 40 40 40 50 50 50 ±0.5 D 5 ±0.5 5 ±0.5 150 150 150 150 150 200 200 200 +5/-0 E see choke selection table F 10 10 10 10 10 20 20 20 ±1 G 15 20 ±0.3 H 20 40 ±0.4 ±0.3 J 120° K 5 All dimensions in mm; 1 inch = 25.4 mm Tolerances according: ISO 2768-m/EN 22768-m Please visit www.schaffner.com to find more details on filter connectors.

5 EMC/EMI Products Schaffner Group Datasheets 05 May 2020

To find your local partner within Schaffner‘s global network: www.schaffner.com © 2020 Schaffner Group The content of this document has been carefully checked and understood. However, neither Schaffner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. Published specifica- tions are subject to change without notice. Product suitability for any area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Schaffner does not guarantee the availability of all published products. This disclaimer shall be governed by substantive Swiss law and resulting disputes shall be settled by the courts at the place of business of Schaffner Holding AG. Latest publications and a complete disclaimer can be downloa- ded from the Schaffner website. All trademarks recognized. Headquarters, global innovation and development Switzerland Schaffner Group Industrie Nord Nordstrasse 11e

4542 Luterbach

info@schaffner.com Sales and application centers China Schaffner EMC Ltd. Shanghai T20-3 C, No 565 Chuangye Road, Pudong district

201201 Shanghai

cschina@schaffner.com www.schaffner.com.cn Finland Schaffner Oy Sauvonrinne 19 H

08500 Lohja

finlandsales@schaffner.com France Schaffner EMC S.A.S. 16-20 Rue Louis Rameau

95875 Bezons

francesales@schaffner.com Germany Schaffner Deutschland GmbH Schoemperlenstrasse 12B

76185 Karlsruhe

germanysales@schaffner.com India Schaffner India Pvt. Ltd REGUS WORLD TRADE CENTRE WTC, 22nd Floor Unit No 2238, Brigade Gateway Campus, 26/1, Dr. Rajkumar Road Malleshwaram (W)

560055 Bangalore

indiasales@schaffner.com Italy Schaffner EMC S.r.l. Via Ticino, 30

20900 Monza (MB)

italysales@schaffner.com Japan Schaffner EMC K.K. Taiju-Seimei Sangenjaya Bldg. 1-32-12, Kamiuma, Setagaya-ku 154-0011 Tokyo T +81 3 5712 3650 F +81 3 5712 3651 japansales@schaffner.com www.schaffner.jp Singapore Schaffner EMC Pte Ltd. #05-09, Kg Ubi Ind. Estate

408705 Singapore

singaporesales@schaffner.com Spain Schaffner EMC España Calle Caléndula 93, Miniparc III, Edificio E El Soto de Moraleja, Alcobendas

28109 Madrid

spainsales@schaffner.com Sweden Schaffner EMC AB Östermalmstorg 1 114 42 Stockholm T +46 8 5050 2425 swedensales@schaffner.com www.schaffner.com Switzerland Schaffner EMV AG Industrie Nord Nordstrasse 11e switzerlandsales@schaffner.com Taiwan R.O.C. Schaffner EMV Ltd.

20 Floor-2, No 97, Section 1, XinTai 5th Road

22175 XiZhi District New Taipei City 22175

taiwansales@schaffner.com www.schaffner.com.tw Thailand Schaffner EMC Co. Ltd. Northern Region Industrial Estate

67 Moo 4 Tambon Ban Klang

Amphur Muangg P .O. Box 14

51000 Lamphun

thailandsales@schaffner.com United Kingdom Schaffner Ltd. 1, Oakmede Place Binfield RG42 4JF Berkshire T +44 118 9770070 F +44 118 9792969 uksales@schaffner.com USA Schaffner EMC Inc.

52 Mayfield Avenue

Edison, New Jersey T +1 732 225 9533 F +1 732 225 4789 usasales@schaffner.com www.schaffnerusa.com