RS4-0503R10AX RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 1 (4) STAND Juni 2016 Rev 01 1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. DC/DC-Converter RS4/RD4-R10 1.0W regulated Single Output we energize electronics! an acal group company we energize electronics!

  • 7 Pin SIL/ 14Pin DIL Package
  • 1000VDC Isolation
  • Up to 3000VDC Isolation
  • Low Ripple and Noise
  • Efficiency up to 73%
  • Operating Temperature Range: -40° ~ +85°C
  • Non Conductive Black Plastic Case
  • EMI Complies with EN55022 Class B OUTPUT SPECIFICATION Voltage accuracy: ±2% Line regulation: ±0.5% LOAD REGULATION: from 0% to 100% Load: ±0.5% Output 3.3V Model: ±1.0% Ripple noise (20Mhz bandwidth): 50mV pk-pk Temperature coefficient: ±0.02% °C Capacitor load: See table INPUT SPECIFICATIONS Voltage Range: ±10% Max. Input Current: See table No-Load/Full-Load Input Current: See table Input Filter: Capacitors Input Reflected Ripple Current : 20mA pk-pk GENERAL SPECIFICATIONS Efficiency: See table I/O Isolation Voltage (60sec): 1000 ~ 3000VDC I/O Isolation Capacitance: 60pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: Variable 50kHz Humidity: 95% rel H Reliability Calculated MTBF : > 3.5MHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC 60950-1 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+85°C (see Derating Curve) Maximum Case Temperature: 100°C Storage Temperature : -40°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Non-conductive Black Plastic (UL94V-0 rated) PIN Material: Ø 0.5mm Alloy42 Solder-coated Potting Material: Epoxy (UL94V-0 rated) Weight Case- Sip: 2.7g Weight Case-DIP: 2.9g Dimmension SIP: 0.76 x 0.28 x 0.39“ Dimmension DIP: 0.80 x 0.40 x 0.27“ ABSOLUTE MAXIMUM RATINGS Input Surge Voltage (100ms)/ 3,3V Models: 5VDC max

5 V Models: 7VDC max

12V Models: 15VDC max 24V Models: 28VDC max Soldering Temperature: 260°C max (2) EMC SPECIFICATIONS Radiated-/Conducted Emissions: EN55022 Class B ESD: IEC 61000-4-2 Perf.Criteria A RS: IEC 61000-4-3 Perf.Criteria A EFT: IEC 61000-4-4 Perf.Criteria A SURGE: IEC 61000-4-5 Perf.Criteria A CS: IEC 61000-4-6 Perf.Criteria A PFMF IEC 61000-4-8 Perf.Criteria A RoHS

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 2 (4) STAND Juni 2016 Rev 01 RS4 - XX XX X XX Power (W) Input 03=3.3V Type A X Code internal Isolation (kVDC) MODEL SELECTION GUIDE MODEL NUMBER INPUT INPUT Current OUTPUT OUTPUTCurrent EFFICIENCY @FL(%) Capacitor Load(uF) VoltageRange (Vdc) No-Load (mA) Full Load (mA) Voltage (Vdc) Full load (mA) RS4-0503R10AX 5 30 385 3.3 333 57 220 RS4-0505 R10AX 5 30 307 5 200 65 220 RS4-0507 R10AX 5 30 307 7.2 138.9 65 220 RS4-0509 R10AX 5 35 307 9 111.1 65 220 RS4-0512 R10AX 5 35 294 12 83.3 68 220 RS4-0515 R10AX 5 35 294 15 66.7 68 220 RS4-1203 R10AX 12 20 160 3.3 333 57 220 RS4-1205 R10AX 12 20 132 5 200 63 220 RS4-1207 R10AX 12 20 128 7.2 138.9 65 220 RS4-1209 R10AX 12 20 126 9 111.1 66 220 RS4-1212 R10AX 12 20 122 12 83.3 68 220 RS4-1215 R10AX 12 20 126 15 66.7 66 220 RS4-2403 R10AX 24 10 76 3.3 333 60 220 RS4-2405 R10AX 24 10 64 5 200 65 220 RS4-2407 R10AX 24 10 64 7.2 138.9 65 220 RS4-2409 R10AX 24 10 61 9 111.1 68 220 RS4-2412 R10AX 24 10 61 12 83.3 68 220 RS4-2415 R10AX 24 10 61 15 66.7 68 220 RD4-0503 R10AX 5 30 350 3.3 333 57 220 RD4-0505 R10AX 5 35 317 5 200 63 220 RD4-0507 R10AX 5 45 327 7.2 138.9 61 220 RD4-0509 R10AX 5 40 298 9 111.1 67 220 RD4-0512 R10AX 5 35 298 12 83.3 67 220 RD4-0515 R10AX 5 35 298 15 66.7 67 220 RD4-1203 R10AX 12 20 146 3.3 333 57 220 RD4-1205 R10AX 12 20 132 5 200 63 220 RD4-1207 R10AX 12 20 132 7.2 138.9 63 220 RD4-1209 R10AX 12 20 128 9 111.1 65 220 RD4-1212 R10AX 12 20 122 12 83.3 68 220 RD4-1215 R10AX 12 20 126 15 66.7 66 220 RD4-2403 R10AX 24 10 73 3.3 333 57 220 RD4-2405 R10AX 24 10 76 5 200 60 220 RD4-2407 R10AX 24 10 76 7.2 138.9 60 220 RD4-2409 R10AX 24 10 61 9 111.1 68 220 RD4-2412 R10AX 24 10 63 12 83.3 66 220 RD4-2415 R10AX 24 10 63 15 66.7 66 220 Suffix “3”means 3 KVdc isolation DC/DC-Converter RS4/RD4-R10 1.0W regulated Single Output we energize electronics! an acal group company we energize electronics!

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 3 (4) STAND Juni 2016 Rev 01 +Vout +Vin DC/DC Converter -Vin -Vout EMI Filter Input filter components (C1, L ) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise. L Load C1 L RS4-05XXR10AX 220uF/100V 12uH RS4-12XX R10AX 220uF/100V 12uH RS4-24XX R10AX 220uF/100V 12uH

05 Models 12 Models

24 Models

The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@rsg -electronic.de EFFICIENCYVSOUTPUTCURRENT 0% 20% 40% 60% 80% 100% 120% Load Lo Line Nominal Hi Line EFFICIENCYVS OUTPUTCURRENT 0% 20% 40% 60% 80% 100% 120% Load Lo Line

55 Nominal

EFFICIENCYVS OUTPUTCURRENT

60 Lo Line

50 Hi Line

0% 20% 40% 60% Load 80% 100% 120% Efficiency(%) Efficiency(%) Efficiency(%) +Vout +Vin DC/DC Converter -Vin -Vout EMI Filter Input filter components (C1, L ) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise. L Load C1 L RS4-05XXR10AX 220uF/100V 12uH RS4-12XX R10AX 220uF/100V 12uH RS4-24XX R10AX 220uF/100V 12uH The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@rsg -electronic.de EFFICIENCYVSOUTPUTCURRENT 0% 20% 40% 60% 80% 100% 120% Load Lo Line Nominal Hi Line EFFICIENCYVS OUTPUTCURRENT 0% 20% 40% 60% 80% 100% 120% Load Lo Line EFFICIENCYVS OUTPUTCURRENT 0% 20% 40% 60% Load 80% 100% 120% Efficiency(%) Efficiency(%) Efficiency(%) +Vout +Vin DC/DC Converter -Vin -Vout EMI Filter Input filter components (C1, L ) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise. L Load C1 L RS4-05XXR10AX 220uF/100V 12uH RS4-12XX R10AX 220uF/100V 12uH RS4-24XX R10AX 220uF/100V 12uH The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@rsg -electronic.de EFFICIENCYVSOUTPUTCURRENT 0% 20% 40% 60% 80% 100% 120% Load Lo Line Nominal Hi Line EFFICIENCYVS OUTPUTCURRENT 0% 20% 40% 60% 80% 100% 120% Load Lo Line EFFICIENCYVS OUTPUTCURRENT 0% 20% 40% 60% Load 80% 100% 120% Efficiency(%) Efficiency(%) Efficiency(%) DC/DC-Converter RS4/RD4-R10 1.0W regulated Single Output we energize electronics! an acal group company we energize electronics!

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 4 (4) STAND Juni 2016 Rev 01 RS4-XXXXR10A1 RD4-XXXXR10A1 DC/DC-Converter RS4/RD4-R10 1.0W regulated Single Output we energize electronics! an acal group company we energize electronics! RS4-XXXXR10A1 RD4-XXXXR10A1RS4-XXXXR10A1 RD4-XXXXR10A1 SIL 7 DIL 14 The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28