RD30LDT3595 RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Supply voltage range : 4.5 to 5.5 V, VO = 30 V
  • Output current : IO = 100 mA (@VCC = 5 V)
  • All the logical input has hysteresis voltage for the slow transition.
  • Input with pull-up resistance. (Enable, Latch terminal)
  • Input with pull-down resistance. (CLK, S-in terminal)
  • Ordering Information Part Name Package Type Package Code (Previous Code) Package Abbreviation Taping Abbreviation (Quantity) Surface Treatment RD30LDT3595FPH0 SSOP-36 pin PRSP0036GA-A (36P2R-A) FP H (1,000 pcs/reel) 0 (Sn-Cu)

REJ03D0896-0300 Rev.3.00 Jun 16, 2008 Page 2 of 6 Pin Arrangement VCC Q13 Q14 Q15 Q16 Q17 Enable Q12 Q11 Q10 Q18 (Top view) 361 7 30 GND GND GND GND GND GND 10 27 Q19 Q20 12 25 Q4 13 CLK S-in 17 Q2124 Q22 Q23 Q24 S-out Latch19 Logic Diagram D Q CKCLK S-in Latch Enable VCC D Q L D Q CK D Q L Output wrong action protection circuit Q24 S-out VCC VCC

REJ03D0896-0300 Rev.3.00 Jun 16, 2008 Page 3 of 6 Function Table Inputs Outputs S-in CLK *1 Latch Enable Q1 to Q24 S-out L IN L L t - 1 L L IN H L Z L H IN L L t - 1 H H IN H L L H H IN H H Z H IN : Input the following signal in CLK 1 2 23 24 H : High level L : Low level Z : High impedance t - 1 : Output level before the indicated steady state input conditions were established. Absolute Maximum Ratings Item Symbol Ratings Unit Test Conditions Supply voltage range V CC -0.5 to 7 V Input voltage range V I –0.5 to V CC + 0.5 V –0.5 to 30 V Output : Z (OFF) Output voltage range *1, V O –0.5 to VCC + 0.5 V S-out Continuous output current I O 100 mA V O = 0 to VCC Maximum power dissipation at Ta = 25°C (in still air) *2 Pd 1.9 W Storage temperature Tstg –65 to 150 °C Notes: The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. This value is limited to 30 V maximum. 2. The maximum package power dissipation was calc ulated using a junction temperature of 150°C. Recommended Operating Conditions Item Symbol Min Max Unit Conditions Supply voltage range V CC 4.5 5.5 V Output voltage range V O — 30 V Q1 to Q24 : Z (OFF) Output current (per pin) I O — 100 mA Q1 to Q24 : ON (duty cycle ≤ 50%) Operating free-air temperature T a –40 85 °C Note: Unused or floating inputs must be held high or low.

REJ03D0896-0300 Rev.3.00 Jun 16, 2008 Page 4 of 6 Electrical Characteristic Ta = 25°C Ta = –40 to 85°C Item Symbol V CC (V) * Min Typ Max Min Typ Max Unit Test condition VIH 4.5 to 5.5 2.0 — V CC 2.0 — V CC V Input voltage VIL 4.5 to 5.5 0 — 0.8 0 — 0.8 V IIH 5.5 — — 25 — — 30 µA V IH = 5.5 V Input current IIL 5.5 — — –25 — — –30 µA V IL = 0 V VOH 5.0 4.9 — — 4.9 — — V I OH = –1 µA Output voltage (S-out) VOL 5.0 — — 0.1 — — 0.1 V I OL = 1 µA Output voltage (Q1 to Q24) VOL 5.0 — — 0.55 — — 0.77 V I OL = 100 mA Output leakage current I OLK 5.5 — — 50 — — 100 µA VO = 30 V (Output : Z (OFF)) ICC1 5.5 — — 300 — — 500 µA Input : Open All driver output : OFF Quiescent supply current I CC2 5.5 — — 300 — — 500 µA Driver output one circuit : ON Note: For conditions shown as Min or Max, use the appr opriate values under recommended operating conditions. Timing Characteristics (VCC = 5 V, CL = 15 pF, RL (S-out) = ∞, RL (Qn) = 100 Ω , tr = tf = 20 ns) Ta = 25°C Ta = –40 to 85°C Item Symbol Min Typ Max Min Typ Max Unit Test condition Maximum clock frequency f max — — 12.5 — — 12.5 MHz Duty cycle = 45 % to 55 % Pulse width t W 30 — — 30 — — ns CLK Pulse width t W 30 — — 30 — — ns Latch Setup time t su 30 — — 30 — — ns S-in to CLK Hold time t h 20 — — 20 — — ns S-in to CLK Setup time t su 60 — — 60 — — ns Latch to CLK Clock pulse rise time t r — — 500 — — 500 ns Clock pulse fall time t f — — 500 — — 500 ns Switching Characteristics (VCC = 5 V, CL = 15 pF, RL (S-out) = ∞, RL (Qn) = 100 Ω , tr = tf = 20ns) Ta = 25°C Ta = –40 to 85°C Item Symbol Min Typ Max Min Typ Max Unit FROM (Input) TO (Output) tPLH — — 60 — — 60 tPHL — — 60 — — 60 ns CLK S-out tPLH — — 70 — — 70 tPHL — — 70 — — 70 ns CLK Qn tPLH — — 70 — — 70 Propagation delay time tPHL — — 70 — — 70 ns Enable Qn

REJ03D0896-0300 Rev.3.00 Jun 16, 2008 Page 5 of 6 Test Circuit VCC CLKZout = 50 Ω Notes: 1. Input waveform : PRR ≤ 1MHz, Duty Cycle = 50%, tr ≤ 20ns, tf ≤ 20ns 2. C L includes probe and jig capacitance. EnableZout = 50 Ω CL Qn S-in RLVCC GND Latch See Function Table Pulse Generator Input Input Output Pulse Generator S-out Output CL RL Waveforms Input CLK Output Qn 10 % 90 % tr 10 % tf

  • Waveform – 1 Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 20 ns, tf ≤ 20 ns 2. The output are measured one at a time with one transition per measurement. 1.5 V 1.5 V Input Enable 3 V 0 V 3 V 0 V Input S-in Input Latch 1.5 V 1.5 V 1.5 V1.5 V tw 90 % 10 % 90 % tr 10 % tf 90 %  Waveform – 2 Input CLK 10 % 90 % tr 10 % tf 1.5 V 1.5 V 90 % 50 %50 % tPLH tPHL 50 %50 % tPLH tPHL 0 V 3 V VOH VOL 0 V 3 V 10 % 90 % tr 10 % tf 1.5 V 1.5 V 0 V 3 V 90 % 10 % 10 %10 % 90 % tr tf, tr tf, 90 % tw tsu thtsu 50 % 50 %Output S-out tPLH tPHL VOH VOL

REJ03D0896-0300 Rev.3.00 Jun 16, 2008 Page 6 of 6 Application Data Output Current IOL (mA) Output Current IOL (mA) Duty Cycle (%) Duty Cycle (%) Ta=25°C Ta=85°C 1 24~ Duty Cycle − Output Current Characteristics Duty Cycle − Output Current Characteristics 1 14~ 100 0 1 02 03 04 05 06 07 08 09 0 1 0 0

  • Output current values represent the current per circuit.  Repeated frequency ≥ 10Hz  The value the circle represents the value of the simultaneously - operated circuit. 100 0 1 02 03 04 05 06 07 08 09 0 1 0 0  Output current values represent the current per circuit.  Repeated frequency ≥ 10Hz  The value the circle represents the value of the simultaneously - operated circuit. Package Dimensions y Index mark1 18 1936 F E HE D e bp A c Detail F L INCLUDE TRIM OFFSET. DIMENSION "*3" DOES NOT NOTE) DO NOT INCLUDE MOLD FLASH. Previous CodeJEITA Package Code RENESAS Code PRSP0036GA-A 36P2R-A MASS[Typ.] 0.5gP-SSOP36-8.4x15-0.80 0.20.150.13 0.50.40.35 MaxNomMin Dimension in Millimeters Symbol Reference 15.215.014.8D 8.68.48.2E 2.0A2 12.2311.9311.63 2.4A 0.05 0.70.50.3L 10°0° c 0.8e 0.15y HE bp 0.65 0.95

Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Renesas Technology Singapore Pte. Ltd.

1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632

Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 RENESAS SALES OFFICES © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2