RS3-0503T20AX RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 1 (4) STAND Juni 2016 Rev 01 1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. DC/DC-Converter RS3/RD3-E20/T20 2.0W unregulated Dual Separate Output we energize electronics! an acal group company we energize electronics!

  • 7 Pin SIL/ 14Pin DIL Package
  • 1000VDC Isolation
  • Up to 3000VDC Isolation
  • Low Ripple and Noise
  • Efficiency up to 80%
  • Operating Temperature Range: -40° ~ +85°C
  • Non Conductive Black Plastic Case OUTPUT SPECIFICATION Voltage accuracy: ±3% Line regulation: per 1%Vin Change: ±1.2% LOAD REGULATION: from 20% to 100% load: ±10% Output 3.3V Model: ±20% Ripple noise (20Mhz bandwidth): 75mV pk-pk Temperature coefficient: ±0.02% °C Capacitor load: See table INPUT SPECIFICATIONS Voltage Range: ±10% Max. Input Current: See table No-Load/Full-Load Input Current: See table Input Filter: Capacitors Input Reflected Ripple Current : 20mA pk-pk GENERAL SPECIFICATIONS Efficiency: See table I/O Isolation Voltage (3sec): 1000 ~ 3000VDC I/O Isolation Capacitance: 60pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: Variable 80kHz Humidity: 95% rel H Reliability Calculated MTBF : >1.121MHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC 60950-1 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+85°C (see Derating Curve) Maximum Case Temperature: 100°C Storage Temperature : -40°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Non-conductive Black Plastic (UL94V-0 rated) PIN Material: Ø 0.5mm Alloy42 Solder-coated Potting Material: Epoxy (UL94V-0 rated) Weight Case- Sip: 2.7g Weight Case-DIP: 2.7g Dimmension SIP: 0.76 x 0.28 x 0.39“ Dimmension DIP: 0.80 x 0.40 x 0.27“ ABSOLUTE MAXIMUM RATINGS (1) Input Surge Voltage (100ms)/

5 V Models: 7VDC max

12V Models: 15VDC max 24V Models: 28VDC max Soldering Temperature (2): 260°C max. RoHS

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 2 (4) STAND Juni 2016 Rev 01 RS3 - XX XX X XX Power (W) Input Type A X Code internal Isolation (kVDC) MODEL SELECTION GUIDE MODEL NUMBER IN PUT Volt age Range (Vdc) INPU T Current OUTPUT Volt age(Vdc ) Outpu t1 Out put2 OUTPUT Current EFFICI ENCY @FL (%) Capac itor Load( uF) No- Load (mA ) Full Lo ad (mA) Full load(mA) Outp ut1 Output2 RS3/RD3-0503T20AX 5 35 519 5 , 3.3 200 , 303 77 220 RS3/RD3-0507T20AX 5 35 519 5 , 7.2 200 , 139 77 220 RS3/RD3-0509T20AX 5 35 519 5 , 9 200 , 111 77 220 RS3/RD3-0512T20AX 5 35 500 5 , 12 200 , 83 80 220 RS3/RD3-0515T20AX 5 35 500 5 , 15 200 , 67 80 220 RS3/RD3-0518T20AX 5 35 519 5 , 18 200 , 55 77 220 RS3/RD3-0524T20AX 5 35 519 5 , 24 200 , 41 77 220 RS3/RD3-1203T20AX 12 25 216 5 , 3.3 200 , 303 77 220 RS3/RD3-1207T20AX 12 25 216 5 , 7.2 200 , 139 77 220 RS3/RD3-12 09T20AX 12 25 216 5 , 9 200 , 111 77 220 RS3/RD3-1212T20AX 12 25 208 5 , 12 200 , 83 80 220 RS3/RD3-1215T20AX 12 25 208 5 , 15 200 , 67 80 220 RS3/RD3-1218T20AX 12 25 216 5 , 18 200 , 55 77 220 RS3/RD3-1224T20AX 12 25 216 5 , 24 200 , 41 77 220 RS3/RD3-2403T20AX 24 12 108 5 , 3.3 200 , 303 77 220 RS3/RD3-2407T20AX 24 12 108 5 , 7.2 200 , 139 77 220 RS3/RD3-2409T20AX 24 12 108 5 , 9 200 , 111 77 220 RS3/RD3-2412SD/01 24 12 104 5 , 12 200 , 83 80 220 RS3/RD3-2415T20AX 24 12 104 5 , 15 200 , 67 80 220 RS3/RD3-2418T20AX 24 12 106 5 , 18 200 , 55 78 220 RS3/RD3-2424T20AX 24 12 108 5 , 24 200 , 41 77 220 Suffix “3” means 3 KVdc isolation The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@ rsg-electronic.de DC/DC-Converter RS3/RD3-E20/T20 2.0W unregulated Dual Separate Output we energize electronics! an acal group company we energize electronics!

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 3 (4) STAND Juni 2016 Rev 01 MODEL NUMBER IN PUT Volt age Range (Vdc) INPU T Current OUTPUT Volt age(Vdc ) Outpu t1 Out put2 OUTPUT Curren t EFFICI ENCY @FL (%) Capac itor Load( uF) No- Load (mA ) Full Lo ad (mA) Fu ll lo ad(m A) Outp ut1 Output2 RS3/RD3-0503E20AX 5 35 519 3.3 , 3 .3 303 , 303 77 220 RS3/RD3-0505E20AX 5 35 512 5 , 5 200 , 200 78 220 RS3/RD3-0507E20AX 5 35 512 7.2 , 7 .2 139 , 139 78 220 RS3/RD3-0509E20AX 5 35 512 9 , 9 111 , 111 78 220 RS3/RD3-0512E20AX 5 35 512 12 , 12 83 , 83 78 220 RS3/RD3-0515E20AX 5 35 506 15 , 15 67 , 67 79 220 RS3/RD3-0518E20AX 5 35 500 18 , 18 55 , 55 80 220 RS3/RD3-0524E20AX 5 35 500 24 , 24 41 , 41 80 220 RS3/RD3-1203E20AX 12 25 216 3.3 , 3 .3 303 , 303 77 220 RS3/RD3-1205E20AX 12 25 216 5 , 5 200 , 200 77 220 RS3/RD3-1207E20AX 12 25 216 7.2 , 7 .2 139 , 139 77 220 RS3/RD3-1209E20AX 12 25 216 9 , 9 111 , 111 77 220 RS3/RD3-1212E20AX 12 25 213 12 , 12 83 , 83 78 220 RS3/RD3-1215E20AX 12 25 213 15 , 15 67 , 67 78 220 RS3/RD3-1218E20AX 12 25 208 18 , 18 55 , 55 80 220 RS3/RD3-1224E20AX 12 25 208 24 , 24 41 , 41 80 220 RS3/RD3-2403E20AX 24 12 106 3.3 , 3 .3 303 , 303 78 220 RS3/RD3-2405E20AX 24 12 106 5 , 5 200 , 200 78 220 RS3/RD3-2407E20AX 24 12 106 7.2 , 7 .2 139 , 139 78 220 RS3/RD3-2409E20AX 24 12 106 9 , 9 111 , 111 78 220 RS3/RD3-2412SD/02 24 12 104 12 , 12 83 , 83 80 220 RS3/RD3-2415E20AX 24 12 104 15 , 15 67 , 67 80 220 RS3/RD3-2418E20AX 24 12 104 18 , 18 55 , 55 80 220 RS3/RD3-2424E20AX 24 12 104 24 , 24 41 , 41 80 220 Suffix “3” means 3 KVdc isolation The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@rsg -electronic.de NOTE 1.Ripple/Noise measured with 20MHz bandwidth. 2.Tested by minimal Vin and constant resistive load. 3.Measured Input reflected ripple current with a simulated source inductance of 12uH. 4.Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 5. Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications. MODEL NUMBER IN PUT Volt age Range (Vdc) INPU T Current OUTPUT Volt age(Vdc ) Outpu t1 Out put2 OUTPUT Curren t EFFICI ENCY @FL (%) Capac itor Load( uF) No- Load (mA ) Full Lo ad (mA) Fu ll lo ad(m A) Outp ut1 Output2 RS3/RD3-0503E20AX 5 35 519 3.3 , 3 .3 303 , 303 77 220 RS3/RD3-0505E20AX 5 35 512 5 , 5 200 , 200 78 220 RS3/RD3-0507E20AX 5 35 512 7.2 , 7 .2 139 , 139 78 220 RS3/RD3-0509E20AX 5 35 512 9 , 9 111 , 111 78 220 RS3/RD3-0512E20AX 5 35 512 12 , 12 83 , 83 78 220 RS3/RD3-0515E20AX 5 35 506 15 , 15 67 , 67 79 220 RS3/RD3-0518E20AX 5 35 500 18 , 18 55 , 55 80 220 RS3/RD3-0524E20AX 5 35 500 24 , 24 41 , 41 80 220 RS3/RD3-1203E20AX 12 25 216 3.3 , 3 .3 303 , 303 77 220 RS3/RD3-1205E20AX 12 25 216 5 , 5 200 , 200 77 220 RS3/RD3-1207E20AX 12 25 216 7.2 , 7 .2 139 , 139 77 220 RS3/RD3-1209E20AX 12 25 216 9 , 9 111 , 111 77 220 RS3/RD3-1212E20AX 12 25 213 12 , 12 83 , 83 78 220 RS3/RD3-1215E20AX 12 25 213 15 , 15 67 , 67 78 220 RS3/RD3-1218E20AX 12 25 208 18 , 18 55 , 55 80 220 RS3/RD3-1224E20AX 12 25 208 24 , 24 41 , 41 80 220 RS3/RD3-2403E20AX 24 12 106 3.3 , 3 .3 303 , 303 78 220 RS3/RD3-2405E20AX 24 12 106 5 , 5 200 , 200 78 220 RS3/RD3-2407E20AX 24 12 106 7.2 , 7 .2 139 , 139 78 220 RS3/RD3-2409E20AX 24 12 106 9 , 9 111 , 111 78 220 RS3/RD3-2412SD/02 24 12 104 12 , 12 83 , 83 80 220 RS3/RD3-2415E20AX 24 12 104 15 , 15 67 , 67 80 220 RS3/RD3-2418E20AX 24 12 104 18 , 18 55 , 55 80 220 RS3/RD3-2424E20AX 24 12 104 24 , 24 41 , 41 80 220 Suffix “3” means 3 KVdc isolation The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@rsg -electronic.de NOTE 1.Ripple/Noise measured with 20MHz bandwidth. 2.Tested by minimal Vin and constant resistive load. 3.Measured Input reflected ripple current with a simulated source inductance of 12uH. 4.Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 5. Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications. DC/DC-Converter RS3/RD3-E20/T20 2.0W unregulated Dual Separate Output we energize electronics! an acal group company we energize electronics!

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 4 (4) STAND Juni 2016 Rev 01 Notes : All dimensions are typical in millimeters ( inches ). 3. Case Tolerance: ± 0.5 ( ± 0.02 ) 2. Pin pitch and length tolerance: ±0.35 ( ± 0.014 ) 19.5 (0.76) 9.50 (0.37) 0.50 (0.02) 2.54 (0.10) 15.24 (0.60) 3.00 (0.12) 7.20 (0.28) 10.0 (0.39) Printed Face 1 2 4 5 6 7 0.50 (0.02) 0.25 (0.01) 0.50 (0.02) 1.25 (0.05) DC-DC CONVERTER XXXX

7 Pin SIL Package

20.32 (0.80) 15.24 (0.60) 0.50 (0.02) 11 9 10 6.88 (0.27)

14 Pin DIL Package

+V Input V1 Output +V1 Output The Pin Connection of high isolation one is the same with normal one. V2 Output +V2 Output PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output N.C The Pin Connection of high isolation one is the same with normal one. V2 Output +V2 Output +V1 Output Notes : All dimensions are typical in millimeters ( inches ). 3. Case Tolerance: ±0.5 ( ± 0.02 ) 2. Pin pitch and length tolerance: ± 0.35 ( ± 0.014 ) RD3-XXXXT20A1 RS3-XXXXE20A1 DC/DC-Converter RS3/RD3-E20/T20 2.0W unregulated Dual Separate Output we energize electronics! an acal group company we energize electronics! Notes : All dimensions are typical in millimeters ( inches ). 3. Case Tolerance: ± 0.5 ( ± 0.02 ) 2. Pin pitch and length tolerance: ±0.35 ( ± 0.014 ) 19.5 (0.76) 9.50 (0.37) 0.50 (0.02) 2.54 (0.10) 15.24 (0.60) 3.00 (0.12) 7.20 (0.28) 10.0 (0.39) Printed Face 1 2 4 5 6 7 0.50 (0.02) 0.25 (0.01) 0.50 (0.02) 1.25 (0.05) DC-DC CONVERTER XXXX 20.32 (0.80) 15.24 (0.60) 0.50 (0.02) 11 9 10 6.88 (0.27) +V Input V1 Output +V1 Output The Pin Connection of high isolation one is the same with normal one. V2 Output +V2 Output PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output N.C The Pin Connection of high isolation one is the same with normal one. V2 Output +V2 Output +V1 Output Notes : All dimensions are typical in millimeters ( inches ). 1. Pin diameter: 0.5 ± 0.05 ( 0.02 ± 0.002 ) 3. Case Tolerance: ±0.5 ( ± 0.02 ) 2. Pin pitch and length tolerance: ± 0.35 ( ± 0.014 ) RD3-XXXXT20A1 RS3-XXXXE20A1 Notes : All dimensions are typical in millimeters ( inches ). 3. Case Tolerance: ± 0.5 ( ± 0.02 ) 2. Pin pitch and length tolerance: ±0.35 ( ± 0.014 ) 19.5 (0.76) 9.50 (0.37) 0.50 (0.02) 2.54 (0.10) 15.24 (0.60) 3.00 (0.12) 7.20 (0.28) 10.0 (0.39) Printed Face 1 2 4 5 6 7 0.50 (0.02) 0.25 (0.01) 0.50 (0.02) 1.25 (0.05) DC-DC CONVERTER XXXX 20.32 (0.80) 15.24 (0.60) 0.50 (0.02) 11 9 10 6.88 (0.27) +V Input V1 Output +V1 Output The Pin Connection of high isolation one is the same with normal one. V2 Output +V2 Output PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output N.C The Pin Connection of high isolation one is the same with normal one. V2 Output +V2 Output +V1 Output Notes : All dimensions are typical in millimeters ( inches ). 1. Pin diameter: 0.5 ± 0.05 ( 0.02 ± 0.002 ) 3. Case Tolerance: ±0.5 ( ± 0.02 ) 2. Pin pitch and length tolerance: ± 0.35 ( ± 0.014 ) RD3-XXXXT20A1 RS3-XXXXE20A1 DIL 14 SIL 7 The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28