RD25ZU104M251BXXXX

RD25ZU104M251BXXXX RFE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

Multilayer Ceramic Capacitor RD Series (COG/X7R/X5R/Y5V/Z5U)Radial Leaded Lead Length * 25-01-2023 Page 1 of 5 RFE International • Tel (949) 833-1988 • Fax (949) 833-1788 • E-mail sales@rfeinc.com CAPACITANCE CODE EXAMPLES SIZE CODE & CAPACITANCE RANGE PART NUMBER EXAMPLE INTRODUCTION FEATURES *omit for standard leads and taped product Note: Contact RFE for capacitance and voltage combinations not shown above. Wmax Hmax Tmax 10V 100 0.33~4.70 2.20~10.00 100V 101 1~4,700 0.00022~0.10 250V 251 100~2,700 0.001~0.033 6.3V 60 10~22.00 47~100.0 10V 100 6.80~10.00 22~47.0 16V 160 0.30~04.70 1.5~10.00 10~22 25V 250 0.68~2.20 4.7~10 50V 500 3,900~33,000 0.47~1.00 2.2~4.7 100V 101 3,900~10,000 0.033~0.47 250V 251 3,000~8,200 0.015~0.15 500V 501 100~3,300 0.001~0.033 4.0 X5R (μf) Y5V (μf) Z5U (μf) RD2 * RD3 * 4.0 4.0 2.5 5.1 5.1 Size Code Dimensions (mm) Voltage Vdc Voltage Code COG/NPO (pf) X7R (μf) Code 1R0 100 330 221 102 222 103 104 224 105 Capacitance in pF 1.0pF 10pF 33pF 220pF 1,000pF 2,200pF 10,000pF 100,000pF 220,000pF Capacitance

TOLERANCE CODE TEMPERATURE COEFFICIENT PACKAGING CODE TAPING & PACKAGING LEAD FORMING LEAD LENGTH EXAMPLE (BULK ONLY) 4.0 4.5 5.0 5.5 4.5 1 5 1 5.5 1 25-01-2023 Page 2 of 5 RFE International • Tel (949) 833-1988 • Fax (949) 833-1788 • E-mail sales@rfeinc.com Multilayer Ceramic Capacitor RD Series (COG/X7R/X5R/Y5V/Z5U)Radial Leaded

RFE International • Tel (949) 833-1988 • Fax (949) 833-1788 • E-mail sales@rfeinc.com

ELECTRICAL CHARACTERISTICS

Multilayer Ceramic Capacitor RD Series (COG/X7R/X5R/Y5V/Z5U)Radial Leaded Table A Parameter Specification Capacitance with the specified tolerance Q C ≥ 30pF:Q C < 30pF:Q ≥ 1000 C<30pF:Q≥400+20xC (C is nominal capacitance) Withstanding Voltage no defects Insulation Resistance More than 10GΩ or 500MΩ0μF (whichever is less) 16Vdc product: More than 10GΩ or 100MΩ0μF (whichever is less) Resistance to Soldering Heat Thermal Shock ΔC ±2% or ±0.25pF (whichever is greater) Q C ≥ 30pF:Q ≥ 1000 C<30pF:Q≥400+20 x C (C is nominal capacitance) Let sit at room temperature for 24 ±2 hours, then measure I.R. More than 1000MΩ or 50MΩ0μF (whichever is less) 16Vdc product: More than 1000GΩ or 10MΩ0μF (whichever is less) Perform the initial measurement Moisture Resistance (steady state) High Temperature Loading ΔC ±2% or ±0.25pF (whichever is greater) Q C ≥ 30pF:Q ≥ 1000 C<30pF:Q≥400+20 x C (C is nominal capacitance) Let sit at room temperature for 24 ±2 hours, then measure I.R. More than 1000MΩ or 50MΩ0μF (whichever is less) 16Vdc product: More than 1000GΩ or 10MΩ0μF (whichever is less) Perform the initial measurement Measuring Condition Applied Voltage: Rated Voltage x 2.5 100V~500V Rated voltage (over) x 1.5 Duration: 1 to 5 sec. The charge/discharge current is less than 50mA Apply rated voltage for 1 minute at 25˚C ± 2˚C and 70%R.H.max. 16Vdc product: Measurement voltage is 25Vdc Shall be measured at 25˚C ± 2˚C at the frequency and voltage C≤1000pF@1MHz±20%, 1±0.2Vrms, C>1000pF@1KHz±10%, 1±0.2Vrms The lead wire is immersed in the melted solder 1.5mm to 2mm from the main body at 260 ± 5˚C for 10±0.5 sec. Perform the five cycles according to the four heat treatments listed in the following table. Remove and let sit at room temperature for 24±2hours, then measure. [See Table A, below]Perform the initial me asurement. The lead wire is immersed in the melted solder 1.5mm to 2mm from the main body at 260 ± 5˚C for 10±0.5 sec. Perform the five cycles according to the four heat treatments listed in the following table. Remove and let sit at room temperature for 24±2hours, then measure. [See Table A, below] Perform the initial measurement.

RFE International • Tel (949) 833-1988 • Fax (949) 833-1788 • E-mail sales@rfeinc.com Multilayer Ceramic Capacitor RD Series (COG/X7R/X5R/Y5V/Z5U)Radial Leaded 70%R.H.max. 16Vdc product: Measurement voltage is 25Vdc Parameter 25V min X7R=0.03max X7R=0.055max (C≥ 1.0μF) Y5V=0.075max 16V Z5U=0.09max X7R/X5R=0.05max 10V max Y5V=0.10max X7R/X5R=0.05max Y5V=0.125max 6.3V X5R=0.075max Withstanding Voltage Insulation Resistance Resistance to Soldering Heat Thermal Shock ΔC 25V min X7R=0.03max X7R=0.055max (C≥ 1.0μF) Y5V=0.075max 16V Z5U=0.05max X7R/X5R=0.10max 10V max X7R/X5R=0.05max Y5V=0.125max 6.3V X5R=0.075max I.R. Moisture Resistance (steady state) High Temperature Loading ΔC 25V min X7R=0.03max X7R=0.055max (C≥ 1.0μF) 16V Z5U=0.09max X7R/X5R=0.05max 10V max Y5V=0.10max X7R/X5R=0.05max Y5V=0.125max 6.3V X5R=0.075max I.R. Specification with the specified tolerance Measuring Condition The lead wire is immersed in the melted solder 1.5mm to 2mm from the main body at 260 ± 5˚C for 10±0.5 sec. Perform the five cycles according to the four heat treaments listed in the Table B (below). Remove and let sit at room temperature for 48 ±4 hours, then measure. Capacitance Apply rated voltage for 1 minute at 25˚C± 2˚C and 70% R.H. max 16Vdc product : Measurement voltage is 25Vdc Dissipation Factor (tanδ) Shall be measured at 25˚C± 2˚C at the frequency and voltage X7R/X5R/Y5V @ 1Hz ± 10%, 1 ± 0.2Vrms Z5U @ 1Hz ± 10%, 0.5 ± 0.2Vrms no defects Applied Voltage: Rated Voltage X 2.5 100V-500V rated voltage (over) X 1.5 Duraon: 1 to 5 sec. The charge/discharge current is less than 50mA More than 10GΩ or 500MΩ0μF (whichever is less) 16Vdc product: More than 10GΩ or 100MΩ0μF (whichever is less) Specificaon X7R/X5R= ±7.5% Y5V=±20% Z5U=±20% D.F. More than 10GΩ or 500MΩ0μF (whichever is less) 16Vdc product: More than 10GΩ or 100MΩ0μF (whichever is less) Let sit at room temperature for 48 ±4 hours then measure. *Initial measurement perform a heat treatment at 150˚C± 10˚C for 1 hours Remove and let sit for 48 ±4 hours at room temperature. Perform the initial measurement. Apply the rated DC voltage at 40˚C ±2˚C and 90 to 95% R.H. for 500 +24 -0 hrs. Remove and let sit at room temperature for 48 +4 hrs. *Initial measurement perform a heat treatment at 150˚C± 10˚C for 1 hour. Remove and let sit for 48 ±4 hours at room temperature Perform the initial measuremen Apply the 200% of rated DC voltage for 1000± 48 hours at the maximum operating temperature at ±2˚C. Remove and let sit for 48±4 hours then measure. The charge/discharge current is less than 50mA. *Initial measurement for Apply 200% of the rated DC voltage for 1 hour at the maximum operating temperature ± 2˚C. Remove let sit at room temperature for 48 ± 4 hours. Perform the initial measurement. *100% for 100V~500V Specificaon X7R/X5R= ±15% Y5V= ±30% Z5U= ±30% D.F. More than 10GΩ or 50MΩ0μF (whichever is less) 16Vdc product: More than 1000GΩ or 10MΩ0μF (whichever is less)

Multilayer Ceramic Capacitor RD Series (COG/X7R/X5R/Y5V/Z5U)Radial Leaded 25-01-2023 Page 5 of 5 RFE International • Tel (949) 833-1988 • Fax (949) 833-1788 • E-mail sales@rfeinc.com STORAGE ENVIRONMENTAL & TEST CHARACTERISTICS