RD15LD74AP RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
- Application of amusement equipment.
- Output voltage : VDS (max) = 15 V
- Output current : IDS (max) = 200 mA (par pin)
- Supply voltage range : 3.0 to 5.5 V
- Operating temperature range : –20 to +85 °C
- Quiescent supply current : 5 µA max.
- Low input current : 1 µA max.
- Ordering Information Part Name Package Type Package Code (Previous Code) Package Abbreviation Packing Abbreviation (Quantity) Surface Treatment RD15LD74APT0 SDIP-20 pin PRDP0020BA-A (20P4B) P T (1,125 pcs/box) 0 (Sn-Cu) RD15LD74ANPT0 DILP-20 pin PRDP0020AC-B (DP-20NEV) P T (1,000 pcs/box) 0 (Ni/Pd/Au) RD15LD74ATH0 TSSOP-20 pin PTSP0020JB-A (TTP-20DAV) T H (2,000 pcs/reel) 0 (Ni/Pd/Au) Note: Please consult the sales office for the above package availability. Pin Arrangement VCC CLR (Top view) 201 7 14 CLK GND 10 11
RD15LD74AP, RD15LD74ANP, RD15LD74AT REJ03D0894-0300 Rev.3.00 Feb 29, 2008 Page 2 of 9 Logic Diagram CLK CLR DQ CK R DQ CK R DQ CK R DQ CK R DQ CK R DQ CK R DQ CK R DQ CK R Y7Y6Y5Y4Y3Y2Y1Y0 D0 D1 D2 D3 D4 D5 D6 D7 VCC GND1 324 57 68 9 1218 16 17 15 1419 13 Note: Schmitt trigger circuit is added to all input. VH = 1.5 V (TYP) Function Table Inputs Output CLR CLK D Y L X X Z H ↑ L Z H ↑ H L H L X Y 0 H ↓ X Y 0 H : High level L : Low level X : Immaterial Z : High Impedance ↑ : Low to High transition ↓ : High to Low transition Y 0 : Level of Y before the indicated steady input conditions were established. Timing Figure CLK Y D CLR GND VCC VOL VOH GND VCC GND VCC
RD15LD74AP, RD15LD74ANP, RD15LD74AT REJ03D0894-0300 Rev.3.00 Feb 29, 2008 Page 3 of 9 Absolute Maximum Ratings Item Symbol Ratings Unit Conditions Supply voltage V CC 6.5 V Input voltage V I –0.5 to V CC V Output voltage V DS –0.5 to 15 V Output : “Z” (off) Output current I DS 200 mA Output : “on” , Current of one circuit
1.47 SDIP
1.38 DILP Maximum power
dissipation *1 PT 0.76 W TSSOP Ta = 25°C Base implementation Storage temperature Tstg –55 to +125 °C Note: The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The maximum package power dissipation was ca lculated using a junction temperature of 150°C Recommended Operating Conditions Item Symbol Ratings Unit Conditions Supply voltage V CC 3.0 5.5 V Input voltage V I 0 V CC V Output voltage V DS 0 15 V Output “Z” (off) 0 200 Duty cycle ≤ 60% 0 150 mA SDIP Duty cycle ≤ 100% 0 200 Duty cycle ≤ 55% 0 140 mA DILP Duty cycle ≤ 100% 0 200 Duty cycle ≤ 25% Output current (Current of an one circuit, when eight circuit operation) IDS 0 105 mA TSSOP Duty cycle ≤ 100% Input rise / fall time t r, tf 0 500 ns V CC = 3.0 V, 4.5 V Operating temperature Ta –20 85 °C Note: Unused or floating inputs must be held high or low.
Electrical Characteristics
(Ta = –20 to +85°C) Ratings Item Symbol VCC (V) Min Typ Max Unit Conditions 3.0 to 3.6 — — V CC×0.16 Input voltage VIL 4.5 to 5.5 — — V CC×0.24 V 3.0 to 3.6 — 0.30 0.45 4.5 to 5.5 — 0.25 0.38 IDS = 100 mA 3.0 to 3.6 — 0.60 0.90 Output voltage V DS 4.5 to 5.5 — 0.51 0.77 V IDS = 200 mA “H” input current I IH 3.0 to 5.5 — 0.005 1.0 µA V I = VCC “L” input current I IL 3.0 to 5.5 — 0.005 –1.0 µA V I = 0 V 5.5 — 0.005 5.0 All output “Z” (off) VI = VCC or GND Quiescent supply current ICC 5.5 — 0.005 5.0 µA All output “on”, VI = VCC or GND Output off state leak current IDS 5.0 — 0.002 5.0 µA V DS = 12 V Output on resister R DS 4.5 — 2.5 3.8 Ω I DS = 100 mA
RD15LD74AP, RD15LD74ANP, RD15LD74AT REJ03D0894-0300 Rev.3.00 Feb 29, 2008 Page 4 of 9 Switching Characteristics (Ta = –20 to +85°C, CL = 30 pF, tr = tf =6 ns ) Ratings Item Symbol VCC (V) Min Max Unit Conditions 3.3 ± 0.3 — 15 Maximum clock frequency fmax 5.0 ± 0.5 — 20 MHz 3.3 ± 0.3 1.0 65 Propagation delay time tPLH 5.0 ± 0.5 1.0 50 ns CLK, CLR to Y 3.3 ± 0.3 1.0 60 Propagation delay time tPHL 5.0 ± 0.5 1.0 45 ns CLK to Y 3.3 ± 0.3 25 — Setup time t su 5.0 ± 0.5 20 — ns D to CLK 3.3 ± 0.3 3 — Hold time t h 5.0 ± 0.5 3 — ns CLK to D 3.3 ± 0.3 50 — Pulse width t W 5.0 ± 0.5 40 — ns CLK, CLR 3.3 ± 0.3 — 30 Output rise time t TLH 5.0 ± 0.5 — 20 ns Y 3.3 ± 0.3 — 10 Output fall time t THL 5.0 ± 0.5 — 5 ns Y Test Circuit VCC CLKZout = 50 Ω Input Palse generator Note: 1. Input waveform : PRR = 1MHz, Duty Cycle = 50%, tr = 6ns, tf = 6ns 2. C L includes probe and jig capacitance. CLR Zout = 50 Ω Input Palse generator CL = 30 pF VT = 12V YD RL = 120Ω VCC GND Output See Function Table
RD15LD74AP, RD15LD74ANP, RD15LD74AT REJ03D0894-0300 Rev.3.00 Feb 29, 2008 Page 5 of 9 Waveforms tPLH VOH VOL GND VCC 50 % 90 % Clear Input (CLR) Output (Y0 to Y7) 10 % tf GND VCC VOH Clock Input (CLK) Output (Y0 to Y7) 10 % 90 % tr 10 % tf
- Waveforms – 1 Waveforms – 2 Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns 2. The input and output is measured one at a time with one transition per measurement. 50 % 50 % 10 % 90 % tTLH 10 % tTHL 50 %50 % tPHL tPLH VOL GND VCC 50 % 10 % 90 % tr 10 % tf 50 % 50 %Data Input (D0 to D7) 90 % th tsu thtsu 90 % tTLH 50 % 10 % 90 % VCC GND VCC GND High Level Pulse Low Level Pulse 50 % 50 % 10 % 90 % tr 10 % tf 50 %50 % tw tw 90 % 10 % 90 % tr 10 % tf 90 % Waveforms – 3 All Input
RD15LD74AP, RD15LD74ANP, RD15LD74AT REJ03D0894-0300 Rev.3.00 Feb 29, 2008 Page 6 of 9 Application Data 100 120 140 160 180 200 0 1 02 03 04 05 06 07 08 09 0 1 0 0 100 120 140 160 180 200 0 1 02 03 04 05 06 07 08 09 0 1 0 0 100 120 140 160 180 200 0 1 02 03 04 05 06 07 08 09 0 1 0 0 100 120 140 160 180 200 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Output Current IDS (mA) Output Current I DS (mA) Output Current IDS (mA)Output Current IDS (mA) Duty Cycle (%) Duty Cycle (%) Duty Cycle (%) Duty Cycle (%) RD15LD74AP Ta=25°C RD15LD74AP Ta=85°C RD15LD74ANP Ta=25°C RD15LD74ANP Ta=85°C 1 8~ 1 5~ 1 8~ 1 4~ Duty Cycle − Output Current Characteristics Duty Cycle − Output Current Characteristics Duty Cycle − Output Current Characteristics Duty Cycle − Output Current Characteristics Output current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously - operated circuit. Output current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously - operated circuit. Output current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously - operated circuit. Output current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously - operated circuit.
RD15LD74AP, RD15LD74ANP, RD15LD74AT REJ03D0894-0300 Rev.3.00 Feb 29, 2008 Page 7 of 9 Application Data 100 120 140 160 180 200 0 1 02 03 04 05 06 07 08 09 0 1 0 0 100 120 140 160 180 200 0 1 02 03 04 05 06 07 08 09 0 1 0 0 1.0 10.0 100.0 1000.0 10 100 1000 0.0 10.0 20.0 30.0 40.0 50.0 -40 -20 0 20 40 60 80 100 Switching Time (ns) Switching Time (ns) Ambient Temperature Ta (°C) Output Current I DS (mA) tPLH(CLR to Y) tPLH(CLK to Y) tPHL(CLK to Y) tTLH tTHL tPLH(CLR to Y) tPLH(CLK to Y) tPHL(CLK to Y) tTLH tTHL VCC=5.0V, VT=12V, CL=30pF, RL=120Ω Switching Time − Ambient Temperature Characteristics VCC=5.0V, VT=12V, Ta=25°C Switching Time − Output Current Characteristics Output current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously - operated circuit. Output current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously - operated circuit. Output Current IDS (mA) Duty Cycle (%) RD15LD74AT Ta=85°C Duty Cycle − Output Current Characteristics 1 2~ Output Current IDS (mA) Duty Cycle (%) RD15LD74AT Ta=25°C Duty Cycle − Output Current Characteristics 1 5~
RD15LD74AP, RD15LD74ANP, RD15LD74AT REJ03D0894-0300 Rev.3.00 Feb 29, 2008 Page 8 of 9 Package Dimensions 2.0281.528 4.5 15° e 1.778 c L 3.0 0.51 0.9 1.0 1.3 A E 6.15 6.3 6.45 D 18.8 19.0 19.2 Reference Symbol Dimension in Millimeters Min Nom Max 0.22 0.27 0.34 P-SDIP20-6.3x19-1.78 1.0g MASS[Typ.] 20P4BPRDP0020BA-A RENESAS CodeJEITA Package Code Previous Code bp 0.38 0.48 0.58 e1 7.627.32 7.92 A2 3.3 SEATING PLANE 20 11 101 c E AL A2A1 bpb3e D INCLUDE TRIM OFFSET. DIMENSION "*3" DOES NOT NOTE) DO NOT INCLUDE MOLD FLASH. 7.62 MaxNomMin Dimension in Millimeters Symbol Reference 24.50 6.30 5.08 Z D E A b p c θ e L 0.51 0.56 1.30 0.19 0.25 0.31 2.29 2.54 2.79 0° 15° 25.40 7.00 0.40 0.48 1.27 2.54 p 1 10 20 11 e b A L A Z e c E D b 0.89 θ ( Ni/Pd/Au plating ) MASS[Typ.] DP-20NEVPRDP0020AC-B RENESAS CodeJEITA Package Code Previous Code
RD15LD74AP, RD15LD74ANP, RD15LD74AT REJ03D0894-0300 Rev.3.00 Feb 29, 2008 Page 9 of 9 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. Index mark E y xM p F 20 11 A D E H Z b Terminal cross section ( Ni/Pd/Au plating ) p c b Detail F A L L θ 0.65 0.10 0.65 6.20 6.60 0.200.15 6.80 MaxNomMin Dimension in Millimeters Symbol Reference 1.10 0.60.50.4 4.40 0.100.070.03 0.25 0.200.150.10 6.40 8°0° 0.13 1.0 6.50 Z HE y x θ c bp E D e e L A P-TSSOP20-4.4x6.5-0.65 0.07g MASS[Typ.] TTP-20DAVPTSP0020JB-A RENESAS CodeJEITA Package Code Previous Code
Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 RENESAS SALES OFFICES © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2