RD1-0303D10AX RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 1 (3) STAND Juni 2016 Rev 01 1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice.

  • 8Pin DIL Package
  • 1000VDC Isolation
  • Up to 3000VDC Isolation
  • Low Ripple and Noise
  • Efficiency up to 85%
  • Operating Temperature Range: -40° ~ +85°C
  • Non Conductive Black Plastic Case
  • EMI Complies with EN55022 Class B DC/DC-Converter RD1-D10 1.0W Unregulated Dual Output we energize electronics! an acal group company we energize electronics! OUTPUT SPECIFICATION Voltage accuracy: ±3% Line regulation: ±1.2% (per 1%Vin Change) LOAD REGULATION: ±10% ( from 20 to 100%) Load Output 3.3V Model: ±20% Ripple noise (20Mhz bandwidth): 100mV pk-pk Temperature coefficient: ±0.02% °C Capacitor load: see table INPUT SPECIFICATIONS Voltage Range: ±10% Max. Input Current: see table No-Load/Full-Load Input Current: see table Input Filter: Capacitors Input Reflected Ripple Current : 20mA pk-pk GENERAL SPECIFICATIONS Efficiency: See table I/O Isolation Voltage (60sec): 1000 ~ 3000VDC I/O Isolation Capacitance: 60pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: Variable 80kHz Humidity: 95% rel H Reliability Calculated MTBF : >1.121MHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC 60950-1 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+85°C (see Derating Curve) Maximum Case Temperature: 100°C Storage Temperature : -40°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Non-conductive Black Plastic (UL94V-0 rated) PIN Material DIP Case: Ø 0.5mm Brass Solder-coated Potting Material: Epoxy (UL94V-0 rated) Weight Case-DIP: 1.8g Dimmension DIP: 0.50 x 0.40 x 0.27“ ABSOLUTE MAXIMUM RATINGS Input Surge Voltage (100ms)/ 3.3V Models: 5VDC max

5 V Models: 7VDC max

12V Models: 15VDC max 15V Models: 18VDC max 24V Models: 28VDC max Soldering Temperature (1): 260°C max. EMC SPECIFICATIONS (2) Radiated-/Conducted Emissions: EN55022 Class B ESD: IEC 61000-4-2 Perf.Criteria A RS: IEC 61000-4-3 Perf.Criteria A EFT: IEC 61000-4-4 Perf.Criteria A SURGE: IEC 61000-4-5 Perf.Criteria A CS: IEC 61000-4-6 Perf.Criteria A PFMF IEC 61000-4-8 Perf.Criteria A

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 2 (3) STAND Juni 2016 Rev 01 RD1 - XX XX D 10 Power (W) Input 03=3.3V Type A X Code internal Isolation (kVDC) RD1 - XX XX D 10 Power (W) Input 03=3.3V Type A X Code internal Isolation (kVDC) DC/DC-Converter RD1-D10 1.0W Unregulated Dual Output we energize electronics! an acal group company we energize electronics! RoHS Suffix „3“ means 3kVdc Isolation Voltage MODEL SELECTION GUIDE MODELNUMBER INPUT INPUTCurrent OUTPUT OUTPUTCurrent VoltageRange No-Load FullLoad Voltage Fullload EFFICIENCY Capacitor (Vdc) (mA) (mA) (Vdc) (mA) @FL(%) Load(uF) RD1-0303D10AX 3.3 30 489 ±3.3 ±152 62 ±100 RD1-0305D10AX 3.3 35 481 ±5 ±100 63 ±100 RD1-0307D10AX 3.3 30 481 ±7.2 ±69 63 ±100 RD1-0309D10AX 3.3 30 466 ±9 ±56 65 ±100 RD1-0312D10AX 3.3 32 543 ±12 ±50 67 ±100 RD1-0315D10AX 3.3 32 452 ±15 ±33 67 ±100 RD1-0318D10AX 3.3 32 439 ±18 ±28 69 ±100 RD1-0324D10AX 3.3 32 439 ±24 ±25 69 ±100 RD1-0503D10AX 5 15 299 ±3.3 ±152 67 ±100 RD1-0505D10AX 5 20 270 ±5 ±100 74 ±100 RD1-0507D10AX 5 15 260 ±7.2 ±69 77 ±100 RD1-0509D10AX 5 20 260 ±9 ±56 77 ±100 RD1-0512D10AX 5 22 300 ±12 ±50 80 ±100 RD1-0515D10AX 5 20 247 ±15 ±33 81 ±100 RD1-0518D10AX 5 22 244 ±18 ±28 82 ±100 RD1-0524D10AX 5 20 300 ±24 ±25 85 ±100 RD1-1203D10AX 12 10 121 ±3.3 ±152 69 ±100 RD1-1205D10AX 12 7 110 ±5 ±100 76 ±100 RD1-1207D10AX 12 15 109 ±7.2 ±69 76 ±100 RD1-1209D10AX 12 15 109 ±9 ±56 78 ±100 RD1-1212D10AX 12 12 123 ±12 ±50 81 ±100 RD1-1215D10AX 12 10 102 ±15 ±33 82 ±100 RD1-1218D10AX 12 15 103 ±18 ±28 81 ±100 RD1-1224D10AX 12 20 125 ±24 ±25 80 ±100 RD1-1503D10AX 15 10 93 ±3.3 ±152 72 ±100 RD1-1505D10AX 15 10 89 ±5 ±100 75 ±100 RD1-1507D10AX 15 15 89 ±7.2 ±69 75 ±100 RD1-1509D10AX 15 15 87 ±9 ±56 77 ±100 RD1-1512D10AX 15 5 103 ±12 ±50 78 ±100 RD1-1515D10AX 15 5 80 ±15 ±33 83 ±100 RD1-1518D10AX 15 10 85 ±18 ±28 78 ±100 RD1-1524D10AX 15 10 103 ±24 ±25 78 ±100 RD1-2403D10AX 24 5 60 ±3.3 ±152 70 ±100 RD1-2405D10AX 24 6 56 ±5 ±100 74 ±100 RD1-2407D10AX 24 6 55 ±7.2 ±69 76 ±100 RD1-2409D10AX 24 7 56 ±9 ±56 75 ±100 RD1-2412D10AX 24 5 62 ±12 ±50 81 ±100 RD1-2415D10AX 24 5 51 ±15 ±33 81 ±100 RD1-2418D10AX 24 7 53 ±18 ±28 78 ±100 RD1-2424D10AX 24 7 64 ±24 ±25 78 ±100 Suffix “3” means 3KVdc Isolation Voltage The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@rsg -electronic.de

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 3 (3) STAND Juni 2016 Rev 01 +Vout +Vin DC/DC Converter -Vin -Vout 1.Ripple/Noise measured with 20MHz bandwidth. 2.Tested by minimal Vin and constant resistive load. 3.Measured Input reflected ripple current with a simulated source inductance of 12uH. 4.Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 5.Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications. 6. Input filter components are be required to help meet conducted emission class B, which application refer to the EMI Filter of design & feature configuration. 7. An external filter capacitor is required if the module has to meet IEC61000- 4-4 and IEC61000- 4-5. The filter capacitor RSG suggest: Nippon - chemi - con KY series, 470uF/100V. L Load C1 C2

5 Models 12 Models

The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@rsg -electronic.de C1 L C2 C3 RD1-03XXD10AX 1210, 2.2uF/100V 18uH RD1-05XXD10AX 1210, 2.2uF/100V 18uH RD1-12XXD10AX 1210, 2.2uF/100V 18uH RD1-15XXD10AX 1210, 2.2uF/100V 18uH RD1-24XXD10AX 1210, 2.2uF/100V 18uH 1210, 2.2uF/100V 1206, 470pF/2KV RD1-48XXD10AX Electrolytic capacitor, 10uF/100V 18uH 1210, 2.2uF/100V 1206, 470pF/2KV LOADING VS OUTPUTVOLTAGE Lo L./Iin Nominal/Iin HiL./Iin 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Load LOADING VS OUTPUTVOLTAGE Lo L./Iin Nominal/Iin HiL./Iin 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Load Output Voltage Output Voltage +Vout +Vin DC/DC Converter -Vin -Vout 1.Ripple/Noise measured with 20MHz bandwidth. 2.Tested by minimal Vin and constant resistive load. 3.Measured Input reflected ripple current with a simulated source inductance of 12uH. 4.Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 5.Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications. 6. Input filter components are be required to help meet conducted emission class B, which application refer to the EMI Filter of design & feature configuration. 7. An external filter capacitor is required if the module has to meet IEC61000- 4-4 and IEC61000- 4-5. The filter capacitor RSG suggest: Nippon - chemi - con KY series, 470uF/100V. L Load C1 C2 The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@rsg -electronic.de C1 L C2 C3 RD1-03XXD10AX 1210, 2.2uF/100V 18uH RD1-05XXD10AX 1210, 2.2uF/100V 18uH RD1-12XXD10AX 1210, 2.2uF/100V 18uH RD1-15XXD10AX 1210, 2.2uF/100V 18uH RD1-24XXD10AX 1210, 2.2uF/100V 18uH 1210, 2.2uF/100V 1206, 470pF/2KV RD1-48XXD10AX Electrolytic capacitor, 10uF/100V 18uH 1210, 2.2uF/100V 1206, 470pF/2KV LOADING VS OUTPUTVOLTAGE Lo L./Iin Nominal/Iin HiL./Iin 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Load LOADING VS OUTPUTVOLTAGE Lo L./Iin Nominal/Iin HiL./Iin 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Load Output Voltage Output Voltage RD1-XXXXD10A1 DC/DC-Converter RD1-D10 1.0W Unregulated Dual Output we energize electronics! an acal group company we energize electronics! The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28