RCV420JP

RCV420 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 13

Technical content

APPLICATIONS

FEATURES

l COMPLETE 4-20mA TO 0-5V CONVERSION l INTERNAL SENSE RESISTORS l PRECISION 10V REFERENCE l BUILT-IN LEVEL-SHIFTING l ±40V COMMON-MODE INPUT RANGE l 0.1% OVERALL CONVERSION ACCURACY l HIGH NOISE IMMUNITY: 86dB CMR transmitter compliance voltage is at a premium. The 10V reference provides a precise 10V output with a typical drift of 5ppm/°C. The RCV420 is completely self-contained and offers a highly versatile function. No adjustments are needed for gain, offset, or CMR. This provides three important advantages over discrete, board-level designs: 1) lower initial design cost, 2) lower manufacturing cost, and 3) easy, cost-effective field repair of a precision circuit.

DESCRIPTION

The RCV420 is a precision current-loop receiver de- signed to convert a 4–20mA input signal into a 0–5V output signal. As a monolithic circuit, it offers high reliability at low cost. The circuit consists of a pre- mium grade operational amplifier, an on-chip precision resistor network, and a precision 10V reference. The RCV420 features 0.1% overall conversion accuracy, 86dB CMR, and ±40V common-mode input range. The circuit introduces only a 1.5V drop at full scale, which is useful in loops containing extra instrument burdens or in intrinsically safe applications where R S 75Ω R S 75Ω –In 16 4 12 V+ V– Ref In C T +In 100kΩ RCV420 1.01kΩ 99kΩ 11.5kΩ300kΩ 300kΩ +10V Ref Rcv f B Rcv Out Ref Out Ref f B Ref Trim Ref Noise Reduction 13 5 Rcv Com Ref Com 92kΩ International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111 Internet: http://www.burr-brown.com/ • FAXLine: (800) 548-6133 (US/Canada Only) • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132 RCV420 © 1988 Burr-Brown Corporation PDS-837E Printed in U.S.A. October, 1997 SBVS019

At T = +25°C and VS = ±15V, unless otherwise noted. RCV420KP, JP CHARACTERISTICS MIN TYP MAX UNITS GAIN Initial 0.3125 V/mA Error 0.05 0.15 % of span Error—JP Grade 0.25 % of span vs Temp 15 ppm/ °C Nonlinearity (1) 0.0002 0.002 % of span OUTPUT Rated Voltage (IO = +10mA, –5mA) 10 12 V Rated Current (EO = 10V) +10, –5 mA Impedance (Differential) 0.01 Ω Current Limit (To Common) +49, –13 mA Capacitive Load 1000 pF (Stable Operation) INPUT Sense Resistance 74.25 75 75.75 Ω Input Impedance (Common-Mode) 200 k Ω Common-Mode Voltage ±40 V CMR (2) 70 80 dB vs Temp (DC) (TA = TMIN to TMAX )7 6 d B AC 60Hz 80 dB OFFSET VOLTAGE (RTO) (3) Initial 1m V vs Temp 10 µV/°C vs Supply (±11.4V to ±18V) 74 90 dB vs Time 200 µV/mo ZERO ERROR (4) Initial 0.025 0.075 % of span Initial—JP Grade 0.15 % of span vs Temp 10 ppm of span/°C OUTPUT NOISE VOLTAGE fB = 0.1Hz to 10Hz 50 µVp-p fO = 10kHz 800 nV/ √Hz DYNAMIC RESPONSE Gain Bandwidth 150 kHz Full Power Bandwidth 30 kHz Slew Rate 1.5 V/ µs Settling Time (0.01%) 10 µs VOLTAGE REFERENCE Initial 9.99 10.01 V Trim Range (5) ±4% vs Temp 5 ppm/ °C vs Supply (±11.4V to ±18V) 0.0002 %/V vs Output Current (IO = 0 to +10mA) 0.0002 %/mA vs Time 15 ppm/kHz Noise (0.1Hz to 10Hz) 5 µVp-p Output Current +10, –2 mA POWER SUPPLY Rated ±15 V Voltage Range(6) –5, +11.4 ±18 V Quiescent Current (VO = 0V) 3 4 mA TEMPERATURE RANGE Specification 0 +70 °C Operation –25 +85 °C Storage –40 +85 °C Thermal Resistance, θJA 80 °C/W NOTES: (1) Nonlinearity is the max peak deviation from best fit straight line. (2) With 0 source impedance on Rcv Com pin. (3) Referred to output with all inputs grounded including Ref In. (4) With 4mA input signal and Voltage Reference connected (includes VOS , Gain Error, and Voltage Reference Errors). (5) External trim slightly affects drift. (6) IO Ref = 5mA, IO Rcv = 2mA.

NOTE: (1) Stresses above these ratings may cause permanent damage. ABSOLUTE MAXIMUM RATINGS (1) Rcv f Rcv Out Rcv Com Ref In Ref Out Ref f NC –In C +In Ref Com NC Ref Noise Reduction Ref Trim T B B PIN CONFIGURATION

ORDERING INFORMATION

RCV420KP 0 °C to +70°C 16-Pin Plastic DIP RCV420JP 0 °C to +70°C 16-Pin Plastic DIP Top View DIP The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems.

PACKAGE INFORMATION

PRODUCT PACKAGE NUMBER (1) RCV420KP 16-Pin Plastic DIP 180 RCV420JP 16-Pin Plastic DIP 180 NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book.

TYPICAL PERFORMANCE CURVES At TA = +25°C, VS = ±15V, unless otherwise noted. STEP RESPONSE NO LOAD SMALL SIGNAL RESPONSE R L = ∞ , CL = 1000pF SMALL SIGNAL RESPONSE NO LOAD POSITIVE COMMON-MODE VOLTAGE RANGE vs POSITIVE POWER SUPPLY VOLTAGE Positive Power Supply Voltage (V) Positive Common-Mode Range (V) 12 13 14 15 16 17 18 19 20 Max Rating = 40V –VS = –5V to –20V TA = –55°C TA = +25°C TA = +125°C 11.4 NEGATIVE COMMON-MODE VOLTAGE RANGE vs NEGATIVE POWER SUPPLY VOLTAGE Negative Power Supply Voltage (V) Negative Common-Mode Range (V) –80 –70 –60 –50 –40 –30 –20 –10 –5 –20 Max Rating = –40V +VS = +11.4V to +20V TA = +25°C TA = –55°C to +125°C –10 –15 COMMON-MODE REJECTION vs FREQUENCY Frequency (Hz) CMR (dB) 100 1 10 100 1k 10k 100k POWER-SUPPLY REJECTION vs FREQUENCY Frequency (Hz) PSR (dB) 100 1 10 100 1k 10k 100k V+ V–

12 Ref In

15 Rcv f

14 Rcv Out

7 Ref Noise Reduction

8 Ref Trim

10 Ref fB

11 Ref Out

NOTE: (1) Typical values. See text. FIGURE 2. Optional Gain Adjustment. shifting, then it must be grounded to maintain high CMR. Figure 2 shows the circuit for adjusting the RCV420 gain. Figure 2. The adjusted gain is given by the following FIGURE 1. Basic Power Supply and Signal Connections. common-mode signal capabilities.

14 VRCV420

FIGURE 10. Series 4-20mA Receivers. FIGURE 13. Power Supply Current Monitor Circuit. FIGURE 12. 4-20mA to 5-0V Conversion. R CM and a 100Ω potentiometer for RG . TABLE 1. Typical Values for RCM and RG . FIGURE 11. Differential Current-to-Voltage Converter.

www.ti.com 23-May-2025 PACKAGING INFORMATION Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) RCV420JP Active Production PDIP (N) | 16 25 | TUBE Yes Call TI N/A for Pkg Type 0 to 70 RCV420JP RCV420JP.A Active Production PDIP (N) | 16 25 | TUBE Yes Call TI N/A for Pkg Type 0 to 70 RCV420JP RCV420KP Active Production PDIP (N) | 16 25 | TUBE Yes Call TI N/A for Pkg Type 0 to 70 RCV420KP RCV420KP.A Active Production PDIP (N) | 16 25 | TUBE Yes Call TI N/A for Pkg Type 0 to 70 RCV420KP (1) Status: For more details on status, see our product life cycle. (2) Material type: When designated, preproduction parts are prototypes/experimental devices, and are not yet approved or released for full production. Testing and final process, including without limitation quality assurance, reliability performance testing, and/or process qualification, may not yet be complete, and this item is subject to further changes or possible discontinuation. If available for ordering, purchases will be subject to an additional waiver at checkout, and are intended for early internal evaluation purposes only. These items are sold without warranties of any kind. (3) RoHS values: Yes, No, RoHS Exempt. See the TI RoHS Statement for additional information and value definition. (4) Lead finish/Ball material: Parts may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. (5) MSL rating/Peak reflow: The moisture sensitivity level ratings and peak solder (reflow) temperatures. In the event that a part has multiple moisture sensitivity ratings, only the lowest level per JEDEC standards is shown. Refer to the shipping label for the actual reflow temperature that will be used to mount the part to the printed circuit board. (6) Part marking: There may be an additional marking, which relates to the logo, the lot trace code information, or the environmental category of the part. Multiple part markings will be inside parentheses. Only one part marking contained in parentheses and separated by a "~" will appear on a part. If a line is indented then it is a continuation of the previous line and the two combined represent the entire part marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1

PACKAGE MATERIALS INFORMATION www.ti.com 23-May-2025 TUBE L - Tube length T - Tube height W - Tube width B - Alignment groove width *All dimensions are nominal Device Package Name Package Type Pins SPQ L (mm) W (mm) T (µm) B (mm) RCV420JP N PDIP 16 25 506 13.97 11230 4.32 RCV420JP.A N PDIP 16 25 506 13.97 11230 4.32 RCV420KP N PDIP 16 25 506 13.97 11230 4.32 RCV420KP.A N PDIP 16 25 506 13.97 11230 4.32 Pack Materials-Page 1

IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2025, Texas Instruments Incorporated