RCT6L-D16-T

RCT6 UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

UNISONIC TECHNOLOGIES CO., LTD RCT6 CMOS IC www.unisonic.com.tw 1 of 8 Copyright © 2005 Unisonic Technologies Co., Ltd QW-R502-058,A REMOTE CONTROLLER WITH SEVEN FUNCTIONS „ DESCRIPTION The UTC RCT6 is a pair of CMOS LSIs designed for remote controlled car applications. The UTC RCT6 have seven control keys controlling the motions (i.e. forward, backward, rightward, leftward, two function keys, and the turbo fu nction) of the remote controlled car. UTC RCT6 have Forward (Backward) combined with the turbo application. The UTC RCT6 is the sending electric circuit. „ FEATURES * Operating voltage range: 2.0V ~ 5.0V * Very low Stand-by current * Few external components needed * 7-function remote controller controlling Forward/Backward/Turbo/ Right-turn/Left turn/two function keys DIP-16 *Pb-free plating product number: RCT6L „ ORDERING INFORMATION Order Number Normal Lead Free Plating Package Packing RCT6-D16-T RCT6L-D16-T DIP-16 Tube RCT6L-D16-T (1)Packing Type (2)Package Type (3)Lead Plating (1) T: Tube (2) D16: DIP-16 (3) L: Lead Free Plating , Blank: Pb/Sn

UNISONIC TECHNOLOGIES CO., LTD 2 of 8 www.unisonic.com.tw Q W - R 5 0 2 - 0 5 8 , A „ PIN CONFIGURATIONS TESTB GND BACKWARDB FORWARDB FIB OSIC OSCO PC5 LEFIB VDD SO F2B TURBOB SC NC RIGHTB „ PIN DESCRIPTION PIN NO. PIN NAME DESCRIPTION

1 RIGHTB The rightward function will be se lected when this pin is connected to GND

2 NC No Connection

3 GND Negative power supply

4 BACKWARDB The backward function will be se lected when this pin is connected to GND

5 FORWARDB The forward function will be se lected when this pin is connected to GND

6 TURBOB The turbo function will be sele cted when this pin is connected to GND

7 SC Output pin of the encoding signal with carrier frequency

8 NC No connection

9 F2B F2 function select

10 SO Output pin of the encodi ng signal without carrier frequency

11 V DD Positive power supply

12 PC Power control output pin

13 OSCO Oscillator output pin

14 OSCI Oscillator input pin

15 F1B F1 function select

16 LEFTB The leftward function will be select ed when this pin is connected to GND.

UNISONIC TECHNOLOGIES CO., LTD 3 of 8 www.unisonic.com.tw Q W - R 5 0 2 - 0 5 8 , A „ BLOCK DIAGRAM Oscillator PC Timing Generator Encoding Circuit Latch Circuit F2B RIGHTB LEFTB TURBOB FORWARDB BACKWARDB Logic SO SC F1B OSCI OSCO O/P Condition Input Condition Forward Backward Turbo Forward = 60Hz Low Low Backward Low = 60Hz Low Forward + turbo = high Low = high Backward + turbo Low = high = high An Auto Shut-Off mechanism is built-i n according to Toy Safety Requirement and effect ive during over-current situation in motor driver. The active high input applying to this Auto Shut-Off pin will turn off the motor. (V T pin, when unused, has to be connected to ground. The transfer point = 1.4V)

UNISONIC TECHNOLOGIES CO., LTD 4 of 8 www.unisonic.com.tw Q W - R 5 0 2 - 0 5 8 , A „ ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT DC Supply Voltage V DD 2.0 ~ 5.0 V Input/Output Voltage GND -0.2 ~ V DD + 0.2 V Operating Temperature T OPR -20 ~ +85 ℃ Storage Temperature T STG -40 ~ +150 ℃ Note 1.Absolute maximum ratings and operation rating recommended are those values beyond which the device could be permanently damaged. Absolute maximum rati ngs are stress ratings only and functional device operation is not implied. 2.The device is guaranteed to meet performance specification within 0 ℃~+70 ℃ operating temperature range and assured by design from -20℃~+85℃. „ ELECTRICAL CHARACTERISTICS (VDD=4V, Ta=25℃, unless otherwise specified.) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Operating Voltage V OPR 3 4 5 V Operating Current I OPR Unload 0.6 mA Stand-by Current I STN-BY Full load 1 µA SO O/P Driving Current (RF) I DRSO V OH = 0.7V 10 mA AC O/P Frequency F AUDIO 500 Hz Oscillator Frequency F OSC R OSC=130KΩ 128 KHz

UNISONIC TECHNOLOGIES CO., LTD 5 of 8 www.unisonic.com.tw Q W - R 5 0 2 - 0 5 8 , A „ DATA FORMAT F1 = "1" F0 = "0" 500Hz, 3/4 duty 500Hz, 1/4 duty „ CODING METHOD The data string that UTC RCT6 receives is below: SO B T R L F1 N1 N2 F2Fstart code (5 bit ) an output code (16 bit , 32ms) Pa rity En d RIGHT :s :n effect Data string: start code + data code + parity code + end code - start code = F1 F1 F1 F1 F0 - data code = B T RL F 1 NN F2F F = F o r w a r d B = B a c k w a r d T = T u r b o R = R i g h t L = L e f t F 1 = F u n c t i o n 1 F2 = Function 2 N = No used code F 、B、T、R、L、F1、N、N、F2 all can have two date format, ”F1” or ”F0”, “F1” means the function is in effect, and “F0” means not. - parity code = for parity check - end code = for (latch data) * Data code can be any combination of F, B, T, R, L, F1, F2, except for F & B, and R & L.

UNISONIC TECHNOLOGIES CO., LTD 6 of 8 www.unisonic.com.tw Q W - R 5 0 2 - 0 5 8 , A „ OUTPUT TABLES OUTPUT STATUSFUNCTION FB T RL F 1 F 2 FORWARD Z LEFT + FORWARD H RIGHT + FORWARD H TURBO H TURBO + FORWARD H H TURBO + LEFT + FORWARD H H H TURBO + RIGHT + FORWARD H H H BACKWARD BACKWARD + RIGHT H BACKWARD + LEFT H TURBO + BACKWARD H H TURBO + BACKWARD + RIGHT H H H TRUBO + BACKWARD + LEFT H H H LEFT H RIGHT H FUNCTION1 H FORWARD + FUNCTION 1 H FORWARD + TURBO + FUNCTION1 H H H TURBO + FUNCTION1 H H BACKWARD + FUNCTION1 Z H BACKWARD + TURBO + FUNCTION1 H H H LEFT + FORWARD + FUNCTION1 Z HH RIGHT + FORWARD + FUNCTION1 Z HH LEFT + BACKWARD + FUNCTION1 Z H H RIGHT + BACKWARD + FUNCTION1 H H LEFT + FUNCTION1 H H RIGHT + FUNCTION1 H H Blank = F0 Z Z Z Z Z Z Z FUNCTION2 H FORWARD + FUNCTION2 H FORWARD + TURBO + FUNCTION 2 H H H TURBO + FUNCTION2 H H BACKWARD + FUNCTION 2 Z H BACKWARD + TURBO + FUNCTION2 H H H LEFT + FORWARD + FUNCTION2 Z HH RIGHT + FORWARD + FUNCTION2 Z HH LEFT + BACKWARD + FUNCTION2 Z HH RIGHT + BACKWARD + FUNCTION2 H H LEFT + FUNCTION2 H H RIGHT + FUNCTION2 H H Z Z H = high level, Z = 60Hz flash Thus, from the table, we can see that there are more than 50 states of function combinations from 7 control keys.

UNISONIC TECHNOLOGIES CO., LTD 7 of 8 www.unisonic.com.tw Q W - R 5 0 2 - 0 5 8 , A „ TYPICAL APPLICATION CIRCUIT (FOR REFERENCE ONLY) Transmitter (UTC RCT6 Fosc ≌ 128KHz) SF1 100K C3 L2 ZD1 R UTC RCT6 L B F T 47P 47P 100Ω 33K100Ω 47P 47P L1R2 120K crystal 27.145MHz 330Ω 50K 0.02μP 33μP 6.8K 0.02μP 0.02μP 100P 10P C10 AMP

UNISONIC TECHNOLOGIES CO., LTD 8 of 8 www.unisonic.com.tw Q W - R 5 0 2 - 0 5 8 , A „ TEST CIRCUIT Fosc for UTC RCT6 ≌ 128KHz fosc = 128KHz UTC RCT 6 12 345 67 8 16 15 14 13 12 11 10 9 100μF 1KΩ 91KΩ R.F Transmitter BACKWARDB TURBOB F2B RIGHIBLEETB FIB FORWARDB UTC RCT6 output pin (SO) has an inverted phase with UTC RCR6C input (SI). If UTC RCT6 is connected without using a RF module, an inverter has to be inserted between this 2 pins. connect directly VDD pin 3pin 10 SI UTC RCR 6C VDDVDD UTC RCT 6 SO UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.