RCR2EL-X-S16-R

RCR2E_15 UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

UNISONIC TECHNOLOGIES CO., LTD RCR2E Preliminary CMOS I C www.unisonic.com.tw 1 of 7 Copyright © 2013 Unisonic Technologies Co., LTD QW-R502-894.a DECODER FOR REMOTE CONTROLLER WITH FIVE FUNCTIONS „ DESCRIPTION The UTC RCR2E provides a complete control functions to the remote-controlled toy. The UTC RCR2E has five output pins corresponding with the five actions. The received signals are amplified by the three-stage amplifie r, and than the appropriate amplified signals are sampled, fault-tolerantly checked and decoded to control the actions of the remote-controlled toy. There is an internal oscillator in the UTC RCR2E respectively. By adding an external resistor conveniently, the oscillator will be constr ucted. The oscillator frequency can be adjusted by the external resistor. The relative error between the frequencies of the two on-chip oscillators in the UTC RCR2E must be less than ±25%. The auto-power-off function is achieved by an internal counter. The PC output is used to control on/off state of the external power supply. Pressing OFF button can also shut down the power supply. Press on any function button will wake up the chip promptly „ FEATURES * The UTC RCR2E works as decoder * RCR2E-A have not ZENER RCR2E-B built-in 3.6V ZENER * Five Pins for five control functions * Operating power-supply voltage: SOP-16: 2.0V ~ 5.0V, DIP-16: 2.5V ~ 5.0V * Auto-power-off if no press on any button in 8s or continuously press on any button over 4 minutes * Manual-power-off with OFF button * On-chip oscillator with an external resistor * On-chip reversing amplifiers * Low operating current „ ORDERING INFORMATION Order Number Package Packing Lead Free Halogen Free RCR2EL-x-D16-T RCR2EG-x-D16-T DIP-16 Tube RCR2EL-x-S16-T RCR2EG-x-S16-T SOP-16 Tube RCR2EL-x-S16-R RCR2EG-x-S16-R SOP-16 Tape Reel RCR2EL-x-S16-T (1)Packing Type (2)Package Type (3)Rank (4)Lead Free (1) T: Tube, R: Tape Reel (2) S16: SOP-16, D16: DIP-16 (3) x: refer to I CC (4) L: Lead Free, G: Halogen Free

RCR2E Preliminary CMOS I C UNISONIC TECHNOLOGIES CO., LTD 2 of 7 www.unisonic.com.tw QW-R502-894.a „ PIN CONFIGURATION VO2 GND SI OSCI OSCO RIGHT LEFT VI2 VO1 VI1 VDD TURBO FORWARD RD BACKWARD LD „ PIN DESCRIPTION PIN NO. PIN NAME FUNCTION

1 VO2 Output pin for the amplifier 2

2 GND Negative power supply

3 SI Input pin of the encoding signal

4 OSCI Oscillator input pin

5 OSCO Oscillator output pin

6 Right Rightward output pin

7 Left Leftward output pin

8 RD With Pull-up resistor, rightward function disabled if this pin connected to GND

9 LD With Pull-up resistor, leftward function disabled if this pin connected to GND

10 Backward Backward output pin

11 Forward Forward output pin

12 Turbo Turbo output pin

13 V CC Positive power supply

14 VI1 Input pin for the amplifier 1

15 VO1 Output pin for the amplifier 1

16 VI2 Input pin for the amplifier 2

RCR2E Preliminary CMOS I C UNISONIC TECHNOLOGIES CO., LTD 3 of 7 www.unisonic.com.tw QW-R502-894.a „ BLOCK DIAGRAM

RCR2E Preliminary CMOS I C UNISONIC TECHNOLOGIES CO., LTD 4 of 7 www.unisonic.com.tw QW-R502-894.a „ ABSOLUTE MAXIMUM RATING (Above which the useful life may be impaired. For user guidelines, not tested) PARAMETER SYMBOL RATINGS UNIT Supply Voltage to Ground Potential (Inputs & Vcc Only) -0.5 ~ +6.0 V Supply Voltage to Ground Potential (Outputs & D/O Only) -0.5 ~ +6.0 V DC Input Voltage V IN -0.5 ~ +6.0 V DC Output Current V DD 20 mA Ambient Temperature with Power Applied T A -10 ~ +40 °C Power Dissipation P D 500 mW Storage Temperature T STG -25 ~ 85 °C Note: Stresses greater than those listed under ABSOLUTE MAXIUM RATI NGS may cause permanent damage to the device. This is a stress rating only and functional operation of the devi ce at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. „ ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Supply Current RCR2E-A ICC Output unloaded 0.5 mA RCR2E-B 15 mA Input Low Voltage V IL Guaranteed Logic LOW level 0.3×VCC V Input High Voltage V IH Guaranteed Logic HIGH level 0.7×VCC V Input Low Current Pin 3, 8, 9 I IL V IL=0V, ON state -60 μA Input High Current Pin 3 IIH V IH=4V, ON state 60 μA Pin 8, 9 10 Input Current Pin 14, 16 I I V IH=0~4V, ON state ±10 μA Output Low Current Pin 1, 5, 15 IOL V OUT=0.5V 200 850 μA Pin 6, 7, 10, 11,12 2 mA Output High Current Pin 1, 5, 15 IOH V OUT=3.5V -200 -850 μA Pin 6, 7, 10, 11,12 -500 Note: Over the Operating Rating, 0°C<TA<70°C, VCC = 4V. „ AC ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Oscillator Frequency (Note 2) f OSC T A=25°C 102 128 154 kHz Oscillator Frequency Fluctuation DIP-16 fMAX-fMIN TA=25°C, VCC=2.5~5V TA=25°C, VCC=2.0~5V 15 kHz SOP-16 10 SI Pin Receive Sensitivity (Vpp) V SI Guaranteed Effective Decoding 300 mV Cycle Time of Function Code t FUN f OSC=128kHz 0.75 1 1.25 ms Cycle Time of Start Code t STA f OSC=128kHz 1.5 2 2.5 ms Note: 1. Over the Operating Rating, 0°C<TA<70°C, VCC = 4V. 2. The relative error between the fr equencies of the two on-c hip oscillators in the UTC RCR2E must be less than ±25%.

RCR2E Preliminary CMOS I C UNISONIC TECHNOLOGIES CO., LTD 5 of 7 www.unisonic.com.tw QW-R502-894.a „ CODE FORMAT (W1 is used for function codes, W2 for start codes) W1: 1kHz 50% Duty Cycle Typical W2: 500Hz 75% Duty Cycle Typical „ WORD FORMAT Start Code: 4W2 Function Code: n ' W1

1 Word

„ ENCODING AND DECODING TIMING W2, W2, W2, W2, (n)xW1, W2, W2, W2, W2, (n)xW1, W2, W2, W2, W2, (n)xW1, W2, W2, W2, W2, (n)xW1 9ms 9ms Function Codes End Codes Decoding Output from UTC RCR2E „ ENCODING INPUT AND DECODING RESULT Number of Function Codes (n) W1 Decoding Results

4 End Code

10 Forward (Pulse)

16 Forward (High level)

22 Turbo

28 Forward (High level) & Left

34 Forward (High level) & Right

40 Backward

46 Backward & Right

52 Backward & Left

58 Left

64 Right

RCR2E Preliminary CMOS I C UNISONIC TECHNOLOGIES CO., LTD 6 of 7 www.unisonic.com.tw QW-R502-894.a „ TYPICAL APPLICATION CIRCUIT Typical Application of the UTC RCR2E-B For Receive Circuit With Five Functions Backward LD Forward Turbo Vcc VI1 VO1 VI2 VO2 GND SI OSCI OSCO Right Left RD SI C18 100u C19 .1u R12 510 C14 .01u C13 4.7u C15 .01u R10 4.3K 18p 47p C1815 180K .02u 4.7u+ 2.2u 1K R3 2.2K .1uR4 2.2M .01u 2.2K C10 30p 2.2M 2.2K C11 390K R21 R22 330 R13 220 VI1 9013 V12 8050 V13 8550 C17 .02£g V14 8550V15

8050 R19

.02£g 8550 R15 330 R16 100 9013 R24 R23 1KC8 0.47n 9013 R11 8550 8550 12V R20 100 VD1 4.2V C12 100u 16 1 UTC RCR2E-B UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.