RCN10R103JTRS TOKEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
FCR, RCA, RCN Chip Resistors Preview Token has introduced precision surface-mount resistor networks, chip array, and flip-chips. Those no-lead packages are optimized to meet new automotive industry requirements for temperature and humidity, while offering high repeatability and stable performance for industrial, telecommunication, and consumer electronics. Suitable for processing on automatic SMD assembly systems, those new devices are RoHS-compliant and compatible with lead (Pb)-free and tin/lead (Sn/Pb) reflow and vapor-phase soldering processes. Flip Chip Resistor FCR Series:
- The resistor flip chip configurations (FCR Series) are available in industry standard EIA0603, EIA0805,and EIA1206.
- Power Rating 1/10W, 1/8W, and 1/4W are available in max. voltage 100V , 300V , and 300V respectively.
- Resistance tolerance is tight to F(± 1%), J(± 5%) with resistance range 1Ω to 10MΩ. Resistor Chip Array RCA Series:
- Its small 1.6mm by 3.2mm package enables the design of high-density circuits.
- The resistor chip array (RCA Series) offers a low cost when compared to using four high-precision resistors.
- The devices feature precision ratio tolerances to F(± 1%), G(± 2%), and J(± 5%) are available with resistance range 10Ω to 1MΩ. Resistor Networks RCN Series:
- The (RCN) resistor networks offer a resistance range from 10Ω to 1MΩ at operating temperature range -55°C~+125°C.
- All devices offer power ratings of 1/16W at +70°C per resistor, custom configurations of the devices are available. Full line products meet RoHS compliant. Detailed specifications, both mechanical and electrical, please contact our sales representative for more information. Token has introduced precision surface-mount resistor networks, chip array, and flip-chips. Surface Mount Chip Resistors TOKEN
FCR Series Dimensions (Unit: mm) L W H 124 Dimensions Type L W H L1 L2 FCR Series Dimensions (Unit: mm) R1 R2 R3 R4 R1=R2=R3=R4 W H PQ L 124 Type L W H L1 L2 P Q FCR Series Dimensions (Unit: mm) L WS473 L2L1 H Q P S Circuit R Circuit Type L W H L1 L2 P Q RCN06-10R Version 2010 FCR, RCA, RCN Chip ResistorsTOKEN
FCR Series Electrical Specifications RCA Series Electrical Specifications Type Power Ratingat 70°C Max. RCWV Max. Overload V oltage Resistance Tolerance(%) Resistance Range (Ω) Standard ResistanceValuesMin. Max. FCR 03 1/10W 50V 100V ± 1% (F) ± 5% (J) 10Ω 1MΩ 10MΩ E-96 E-24 FCR 05 1/8W 150V 300V ± 1% (F) ± 5% (J) 10Ω 1MΩ 10MΩ E-96 E-24 FCR 06 1/4W 200V 300V ± 1% (F) ± 5% (J) 10Ω 1MΩ 10MΩ E-96 E-24 RCN Series Electrical Specifications Type Rated Power at70°C Max. Working V oltage Max. Overload V oltage T.C.R. (ppm/°C) Resistance Range Jumper Rated Current Jumper Resistance Value Operating Temperature Range F(±1%) E-96 G(±2%) J(±5%) E-24 RCA03-4D (0603) 0.063 50V 100V ± 200 100Ω~470KΩ 10Ω~1MΩ 1A 50mΩ MAX -55°C~+125°C Type Rated Power at70°C Max. Working V oltage Max. Overload V oltage T.C.R. (ppm/°C) Resistance Range Number of Terminals Number of Elements Operating Temperature RangeJ (±5%) E-12 RCN06-10R RCN06-10S 1/16W 50V 100V ±200 10Ω~1MΩ 10 8 -55°C~+125°C Version 2010 FCR, RCA, RCN Chip ResistorsTOKEN
Item Specification Test Method DC Resistance J: ±5%, F: ±1% JIS C 5202 5.1 Temperature Coefficient of Resistance(TCR) J: ±200ppm/°C F: ±100ppm/°C JIS C 5202 5.2 / IEC 115-1 4.8.4.2; T1 T2 Test emperature: 25°C→-55°C 25°C →-55°C Short Time Overload J:ΔR≤ ± (2%+0.1Ω) F:ΔR≤ ± (1%+0.05Ω) JIS C 5202 5.5 / IEC 115-1 4.13; 2.5xRated voltage (Max. Overload V oltage) for 5 sec. measure resistance after 30 minutes Resistance to Solder Heat J:ΔR≤ ± (1%+0.1Ω) No mechanical damage JIS C 5202 6.4 / IEC 115-1 4.18; With 260 ± 5 °C for 10 ± 1 sec. Solderability Over 95% of termination must becovered with solder JIS C 5202 7.4 / IEC 115-1 4.17; After immersing flux, dip in the 235 ± 5°C molten solderbath for 2 ± 0.5 sec. Temperature Cycle J:ΔR≤ ± (1%+0.1Ω) No mechanical damage JIS C 5202 7.4 / IEC 115-1 4.19; Repeat 5 cycles as follow; -55°C(30minutes)+25°C(10~15minutes) +125°C(30minutes)+25°C(10~15minutes) Terminal Strength ΔR≤ ± (0.5%+0.05Ω) No mechanical damage JIS C 5202 6.1; 500g for 10 seconds Load Life J:ΔR≤ ± (3%+0.1Ω) F:ΔR≤ ± (1%+0.05Ω) JIS C 5202 7.10 / IEC 115-1 4.25.1; Permanent resistance change after 1000+48/-0 hours (1.5 hours ON,0.5hour OFF) at RCWV or Max. Keep the element at 70 ± 3°Cambient Load Life Humidity J:ΔR≤ ± (3%+0.1Ω) F:ΔR≤ ± (1%+0.05Ω) JIS C 5202 7.9 / IEC 115-1 4.24.2; Maintain the temperature of the element at 40 ± 2 °Cand 90~95% RH with the ratedvoltage applied. Cycle ON for 1.5hours and Off for 0.5 hour for 1000+48/-0 hours.After one hour, measure the resistance value. Intermittent Overload ΔR≤ ± (5%+0.1Ω) No mechanical damage JIS C 5202 5.8; 2.5xRated V oltage(Max.OverloadV oltage), 1secON,25sec OFF, test 10,000 cycles Environmental Characteristics Marking 3 digit marking for E24(J) 100~10Ω 122~1.2KΩ 473~47KΩ 105~1MΩ 124 1542 02C 15E 3 digit marking for E96(F) 02C 102102=10.2KΩ 4 digit marking for E96(F) 22R1~22.1Ω 1020~102Ω 1542~15.4KΩ 15E 140104=1.4MΩ Version 2010 FCR, RCA, RCN Chip ResistorsTOKEN
Tape Specifications (Unit: mm) W E F G D A B Codes A B W F E P1 P2 P0 D G -0 2.75 -0 2.75 FCR06 2.00±0.10 -0.15 3.57±0.10 -0 2.75 Tape Specifications (Unit: mm) B D C T N G A Symbol A B C D G N T How to Order
10 RRCN 103
Type: SMD Network Size: 06 (6.40×3.10mm) Number of Terminals: 10 Nominal Resistance Code Resistance Tolerance 3-Digit E12 Series EX 10Ω=100 100Ω=101 Circuit Structure: R Circuit,S Circuit Code Package TR Taping Reel P Bulk Package Resistance Tolerance (%) Code Resistance Tolerance J ±5% J TRS Version 2010 FCR, RCA, RCN Chip ResistorsTOKEN
100 JFCR TR
Code Size (mm) 03 1.60×0.80 05 2.00×1.25 06 3.10×1.55 Part Number: FCR Size Nominal Resistance Code Nominal Resistance SMD Elements 3-Digit E24 Series EX 10Ω=100 47Ω=470 4-Digit E96 Series EX 10.2Ω=10R2 10KΩ=1002 Jumper 000 Code Package TR Taping Reel P Bulk Resistance Tolerance Package Code Resistance Tolerance F ±1% J ±5% How to Order
4 DRCA 101
Part Number: RCA Size: 03 (3.20×1.60mm) Nominal Resistance Code Nominal Resistance SMD Elements 3-Digit E24 Series EX 10Ω=100 47Ω=470 4-Digit E96 Series EX 10.2Ω=10R2 10KΩ=1002 Jumper 000 Code Package TR Taping Reel P Bulk Resistance Tolerance Package Code Resistance Tolerance F ±1% G ±2% J ±5% Number of circuits: 4 (4 circuits) Electrode Structure: D (protruding electrode) Version 2010 FCR, RCA, RCN Chip Resistors Back to 1st Page - Surface Mount Resistors FCR, RCA, RCN TOKEN