RC1206

RC1206 YAGEO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1% RoHS compliant Product specification – Jul 02, 2009 V.4 Supersedes Date of Mar. 06, 2003

Chip Resistor Surface Mount www.yageo.com Jul 02, 2009 V.4 Product specification SERIES RC 1206 (RoHS Compliant) YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) RC1206 X R - XX XXXX L (1) TOLERANCE F = ±1% J = ±5% (for Jumper ordering, use code of J) (2) PACKAGING TYPE R = Paper taping reel (3) TEMPERATURE COEFFICIENT OF RESISTANCE – = Base on spec (4) TAPING REEL 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel (5) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of “Resistance rule of global part number”. (6) DEFAULT CODE Letter L is system default code for order only (Note) ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC Both part numbers are identified by the series, size, to lerance, packing type, temperature coefficient, taping reel and resistance value. SCOPE This specification describes RC1206 series chip resistors with lead-free terminations made by thick film process.

APPLICATIONS

All general purpose application

FEATURES

Halogen Free Epoxy RoHS compliant - Products with lead free terminations meet RoHS requirements - Pb-glass contained in electrodes, resistor element and glass are exempted by RoHS Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production O RDERING EXAMPLE The ordering code of a RC1206 chip resistor, value 56 X with ±1% tolerance, supplied in 7-inch tape reel is: RC1206FR-0756RL. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed Resistance rule of global part number Resistance code rule Example 0R 0R = Jumpe r XRXX (1 to 9.76 Ω) 1R = 1 Ω 1R5 = 1.5 Ω 9R76 = 9.76 Ω XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 to 9.76 MΩ) 1M = 1,000,000 Ω 9M76= 9,760,000 Ω

Chip Resistor Surface Mount www.yageo.com Jul 02, 2009 V.4 Product specification SERIES RC 1206 (RoHS Compliant) 12NC CODE 2322 / 2350 XXX XX XXX L (1) (2) (3) (4) PAPER / PE TAPE ON REEL (units) (2) TYPE/ 1206 START IN (1) TOL. (%) RESISTANCE RANGE 5,000 10,000/not preferred 20,000 RC01 2322 ±5% 1 to 10 M Ω 711 61xxx 711 51xxx 711 81xx x RC02 2322 ±1% 1 to 10 M Ω 724 6xxxx 724 7xxxx 724 8xxx x HRC01 2350 ±5% 11 to 22 M Ω 520 10xxx - - Jumper 2322 - 0 Ω 711 91032 711 91005 711 92004 PPHHYYCCOOMMPP BBRRAANNDD oorrddeerriinngg ccooddeess Both GLOBAL PART NUMBER (preferred) and 12NC (t raditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER an d ordering example, please refer to page 2. Resistance decade (3) Last digit 0.01 to 0.0976 X 0 0.1 to 0.976 X 7 1 to 9.76 X 8 10 to 97.6 X 9 100 to 976 X 1 1 to 9.76 KX 2 10 to 97.6 KX 3 100 to 976 KX 4 1 to 9.76 MX 5 10 to 97.6 MX 6 Example: 0.02 X = 0200 or 200

0.3 X = 3007 or 307

1 X = 1008 or 108

33 K X = 3303 or 333

10 M X = 1006 or 106

(1) The resistors have a 12-digit orde ring code starting with 2322 / 2350. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of “Last digit of 12NC”. (4) Letter L is system default code for order only (Note) ORDERING EXAMPLE The ordering code of a RC02 resistor, value 56 X with ±1% tolerance, supplied in tape of 10,000 units per reel is: 232272465609L or RC1206FR-0756RL. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed

Chip Resistor Surface Mount www.yageo.com Jul 02, 2009 V.4 Product specification SERIES RC 1206 (RoHS Compliant) CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Ni- barrier) are added. See fig.3 DIMENSIONS TYPE RC1206 L (mm) 3.10 ± 0.10 W (mm) 1.60 ± 0.10 H (mm) 0.55 ± 0.10 Ta ble 1 overcoat Primary glass layer resistive layer (Jumper chip is a conductor) inner electrode termination (Ni/matte tin) ceramic substrate H YNSC066 overcoat W L marking layer OOUUTTLLIINNEESS For dimension see Table 1 Fig. 3 Chip resistor outlines MARKING RC1206 E-24 series: 3 digits First two digits for significant figu re and 3rd digit for number of zeros Both E-24 and E-96 series: 4 digits First three digits for significant figu re and 4th digit for number of zeros For further marking information, please see special data sheet “Chip resistors marking” Fig. 1 Value = 10 KΩ YNSC001 Fig. 2 Value = 10 K Ω YNSC004

Chip Resistor Surface Mount www.yageo.com Jul 02, 2009 V.4 Product specification SERIES RC 1206 (RoHS Compliant)

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS RC1206 1/4 W Operating Temperature Range –55 °C to +155 °C Maximum Working Voltage 200 V Maximum Overload Voltage 400 V Dielectric Withstanding Voltage 500 V 5% (E24) 1 Ω to 22 MΩ 1% (E24/E96) 1 Ω to 10 MΩ Resistance Range Zero Ohm Jumper < 0.05 Ω 1 Ω ≤ R ≤ 10 Ω

10 MΩ < R ≤ 22 MΩ

±200 ppm/°C ±200 ppm/°CTemperature Coefficient 10 Ω < R ≤ 10 MΩ ±100 ppm/°C Rated Current 2 AJumper Criteria Maximum Current 10 A FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”. Ta ble 2 PACKING STYLE AND PACKAGING QUANTITY PRODUCT TYPE PACKING STYLE REEL DIMENSION QUANTITY PER REEL RC1206 Paper Taping Reel (R) 7" (178 mm) 5,000 units 10" (254 mm) 10,000 units 13" (330 mm) 20,000 units NOTE 1. For paper tape and reel specification/dimensions, pl ease see the special data sheet “Chip resistors packing” Table 3 Packing style and packaging quantity MLB206_2 70 10055 50 Tamb( C)o (%P ) rated 100 155 P handbook, halfpage FUNCTIONAL DESCRIPTION PPOOWWEERR RRAATTIINNGG RC1206 rated power at 70°C is 1/4 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=√(P X R) or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (V) P=Rated power (W) R=Resistance value ( X) Fig. 4 Maximum dissipation (P) in percentage of rated power as a function of the operati ng ambient temperature (T amb)

Chip Resistor Surface Mount www.yageo.com Jul 02, 2009 V.4 Product specification SERIES RC 1206 (RoHS Compliant) TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS At +25/–55 °C and +25/+125 °C Temperature Coefficient of Resistance (T.C.R.) IEC 60115-1 4.8 Formula: Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Refer to table 2 Life/Endurance IEC 60115-1 4.25.1 At 70±5 °C for 1,000 hours, RCWV applied for 1.5 hours on, 0.5 hour off, still air required ±(1.0%+0.05 Ω) for 1% tol. ±(3.0%+0.05 Ω) for 5% tol. <100 mΩ for Jumper High Temperature Exposure/ Endurance at Upper Category Temperature IEC 60068-2-2 1,000 hours at 155±5 °C, unpowered ±(1.0%+0.05 Ω) for 1% tol. ±(2.0%+0.05 Ω) for 5% tol. <50 mΩ for Jumper Moisture Resistance MIL-STD-202G Method-106G Each temperature / humidity cycle is defined at 8 hours, 3 cycles / 24 hours for 10d. with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion ±(0.5%+0.05 Ω) for 1% tol. ±(2.0%+0.05 Ω) for 5% tol. <100 mΩ for Jumper Thermal Shock MIL-STD-202G Method-107G -55/+125 °C Number of cycles required is 300. Devices unmounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ±(0.5%+0.05 Ω) for 1% tol. ±(1%+0.05 Ω) for 5% tol. <50 mΩ for Jumper Short Time Overload IEC60115-1 4.13 2.5 times of rated voltage or maximum overload voltage whichever is less for 5 sec at room temperature ±(1.0%+0.05 Ω) for 1% tol. ±(2.0%+0.05 Ω) for 5% tol. <50 mΩ for Jumper No visible damage Ta ble 4 Test condition, procedure and requirements R2–R1 R1(t2–t1)

Chip Resistor Surface Mount www.yageo.com Jul 02, 2009 V.4 Product specification SERIES RC 1206 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Board Flex/ Bending IEC 60068-2-21 Chips mounted on a 90mm glass epoxy resin PCB (FR4) 2 mm bending Bending time: 60±5 seconds <50 mΩ for Jumper No visible damage Low Temperature Operation IEC 60068-2-1 The resistor shall be subjected to a DC rated voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C This constitutes shall be repeated for 96 hours However the applied voltage shall not exceed the maximum operating voltage ±(0.5%+0.05 Ω) for 1% tol. ±(1.0%+0.05 Ω) for 5% tol. No visible damage Insulation Resistance IEC 60115-1 4.6 Rated continuous overload voltage (RCOV) for 1 minute Type RC1206 Voltage (DC) 100 V ≥10 GΩ Dielectric Withstand Voltage IEC 60115-1 4.7 Maximum voltage (Vrms) applied for 1 minute Type RC1206 Voltage (AC) 500 Vrms No breakdown or flashover Resistance to Solvent IPC/JEDEC J-STD-020D lsopropylalcohol (C3H7OH) followed by brushing No smeared Noise IEC 60115-1 4.12 Maximum voltage (Vrms) applied Resistors range Value R < 100 Ω 10 dB 100 Ω ≤ R < 1 KΩ 20 dB

1 KΩ ≤ R < 10 KΩ 30 dB

10 KΩ ≤ R < 100 KΩ 40 dB

100 KΩ ≤ R < 1 MΩ 46 dB

1 MΩ ≤ R ≤ 22 MΩ 48 dB

(steady state) IEC 60115-1 4.37 Steady state for 1000 hours at 40 °C / 95% R.H. RCWV applied for 1.5 hours on and 0.5 hour off ±(1.0%+0.05 Ω) for 1% tol. ±(2.0%+0.05 Ω) for 5% tol. <100 mΩ for Jumper

Chip Resistor Surface Mount www.yageo.com Jul 02, 2009 V.4 Product specification SERIES RC 1206 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Intermittent Overload IEC 60115-1 4.39 2.5 times of rated voltage or maximum overload voltage whichever is less for 1 second on and 25 seconds off; total 10,000 cycles ±(1.0%+0.05 Ω) for 1% tol. ±(2.0%+0.05 Ω) for 5% tol. <100 mΩ for Jumper Solderability - Wetting IPC/JEDEC J-STD-002B test B Electrical Test not required Magnification 50X SMD conditions: st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245±3 °C Dipping time: 3±0.5 seconds Well tinned (≥95% covered) No visible damage - Leaching IPC/JEDEC J-STD-002B test D Leadfree solder, 260 °C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat IEC 60068-2-58 Condition B, no pre-heat of samples Leadfree solder, 260 °C, 10 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ±(0.5%+0.05 Ω) for 1% tol. ±(1.0%+0.05 Ω) for 5% tol. <50 mΩ for Jumper No visible damage

Chip Resistor Surface Mount www.yageo.com Jul 02, 2009 V.4 Product specification SERIES RC 1206 (RoHS Compliant)

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 4 Jul 02, 2009 - - Test Items and methods updated - Test requirements upgraded Version 3 Jul 15, 2008 - - Change to dual brand datasheet that describe RC1206 with RoHS compliant - Description of "Halogen Free Epoxy" added - Define global part number Version 2 Sep 03, 2004 - - New datasheet for 1206 thick film 1% and 5% with lead-free terminations - Replace the 1206 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10, and HRC01_5_4 - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape) - High ohmic products combined into standard products. “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.”

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Yageo: RC1206FR-07105RL RC1206FR-0710K2L RC1206FR-0710ML RC1206FR-0711K5L RC1206FR-0711KL RC1206FR-07121KL RC1206FR-07121RL RC1206FR-07124RL RC1206FR-0712K1L RC1206FR-0712K7L RC1206FR-0712R1L RC1206FR-07130RL RC1206FR-0713K3L RC1206FR-0713K7L RC1206FR-0713KL RC1206FR-07140KL RC1206FR-07140RL RC1206FR-07143KL RC1206FR-07147RL RC1206FR-0714K7L RC1206FR-07150KL RC1206FR-07150RL RC1206FR-07154KL RC1206FR-0715K4L RC1206FR-0715K8L RC1206FR-0715KL RC1206FR-0715RL RC1206FR-07162RL RC1206FR-07165RL RC1206FR-07169KL RC1206FR-07169RL RC1206FR-0716K2L RC1206FR-0716R9L RC1206FR-0717K8L RC1206FR-0717R8L RC1206FR-07182RL RC1206FR-0718K7L RC1206FR-0719K6L RC1206FR-071K21L RC1206FR-071K2L RC1206FR-071K43L RC1206FR-071K4L RC1206FR-071K54L RC1206FR-071K5L RC1206FR-071K62L RC1206FR-071K74L RC1206FR-071K78L RC1206FR-071M21L RC1206FR-071M62L RC1206FR-071ML RC1206FR-071R33L RC1206FR-071R37L RC1206FR-071RL RC1206FR-07200KL RC1206FR-07200RL RC1206FR-07205KL RC1206FR-07205RL RC1206FR-0720K5L RC1206FR-0720KL RC1206FR-0720R5L RC1206FR-0720RL RC1206FR-07215KL RC1206FR-0721KL RC1206FR-0721R5L RC1206FR-07220RL RC1206FR-07221KL RC1206FR-07221RL RC1206FR-07226RL RC1206FR-0722K1L RC1206FR-0722K6L RC1206FR-0722KL RC1206FR-0722R1L RC1206FR-0722RL RC1206FR-07237KL RC1206FR-07237RL RC1206FR-0723K7L RC1206FR-07243RL RC1206FR-07249KL RC1206FR-07249RL RC1206FR-0724K3L RC1206FR-0724R3L RC1206FR-0724R9L RC1206FR-07255KL RC1206FR-0725K5L RC1206FR-07261KL RC1206FR-07261RL RC1206FR-07267KL RC1206FR-0726K1L RC1206FR-0726K7L RC1206FR-0726R1L RC1206FR-0726R7L RC1206FR-07274KL RC1206FR-0727K4L RC1206FR-0727R4L RC1206FR-0727RL RC1206FR-07287KL RC1206FR-07294KL RC1206FR-072K05L RC1206FR-072K15L RC1206FR-072K1L