MMG20271HT1 FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 18
Technical content
Features
- Frequency: 1500- -2700 MHz
- Noise Figure: 1.7 dB @ 2140 MHz
- P1dB: 27.5 dBm @ 2140 MHz
- Small- -Signal Gain: 16 dB @ 2140 MHz
- Third Order Output Intercept Point: 42 dBm @ 2140 MHz
- Single 5 Volt Supply
- Supply Current: 180 mA
- 50 Ohm Operation (some external matching required)
- Low Cost QFN Surface Mount Package
- RoHS Compliant
- In Tape and Reel. T1 Suffix = 1000 Units, 12 mm Tape Width, 7 inch Reel.
Table 1. Typical Performance(1)
- VDD =5V d c ,TA =2 5°C, 50 ohm system, application circuit tuned
Table 2. Maximum Ratings
- For reliable operation, the junction temperature should not
Table 3. Thermal Characteristics Select Documentation/Application Notes - - AN1955. © Freescale Semiconductor, Inc., 2010.All rights reserved.
Table 4. Electrical Characteristics(VDD = 5 Vdc, 2140 MHz, TA =2 5°C, 50 ohm system, in Freescale Application Circuit)
- For reliable operation, the junction temperature should not exceed 150°C.
Table 5. Functional Pin Description and requires a DC blocking capacitor. VBA 12 Bias voltage and current adjust pin.
- The RF input has a DC path to ground and therefore may require an external
Table 6. ESD Protection Characteristics Table 7. Moisture Sensitivity Level Figure 1. Pin Connections
50 OHM APPLICATION CIRCUIT: 2140 MHz
Figure 2. MMG20271HT1 Test Circuit Schematic Table 8. MMG20271HT1 Test Circuit Component Designations and Values
- Location L1 can be an inductor, resistor or jumper depending on frequency.
Figure 3. MMG20271HT1 Test Circuit Component Layout
- Location L1 can be an inductor, resistor or jumper depending on frequency.
50 OHM TYPICAL CHARACTERISTICS: 2140 MHz
Figure 4. Small- -Signal Gain (S21) versus Figure 5. Input Return Loss (S11) versus Figure 6. Output Return Loss (S22) versus Figure 7. P1dB versus Frequency Figure 8. Third Order Output Intercept Point Figure 9. Noise Figure versus Frequency
Figure 10. Single- -Carrier W- -CDMA Adjacent
50 OHM APPLICATION CIRCUIT: 1900 MHz
Figure 11. MMG20271HT1 Test Circuit Schematic Table 9. MMG20271HT1 Test Circuit Component Designations and Values
Figure 12. MMG20271HT1 Test Circuit Component Layout
50 OHM TYPICAL CHARACTERISTICS: 1900 MHz
1 MHz Tone Spacing
Figure 13. Small- -Signal Gain (S21) versus Figure 14. Input Return Loss (S11) versus Figure 15. Output Return Loss (S22) versus Figure 16. P1dB versus Frequency Figure 17. Third Order Output Intercept Figure 18. Noise Figure versus Frequency
50 OHM APPLICATION CIRCUIT: 2700 MHz
Figure 19. MMG20271HT1 Test Circuit Schematic Table 10. MMG20271HT1 Test Circuit Component Designations and Values
- Location L1 can be an inductor, resistor or jumper depending on frequency.
Figure 20. MMG20271HT1 Test Circuit Component Layout
- Location L1 can be an inductor, resistor or jumper depending on frequency.
50 OHM TYPICAL CHARACTERISTICS: 2700 MHz
Figure 21. Small- -Signal Gain (S21) versus Figure 22. Input Return Loss (S11) versus Figure 23. Output Return Loss (S22) versus Figure 24. P1dB versus Frequency Figure 25. Third Order Output Intercept Figure 26. Noise Figure versus Frequency
PRODUCT DOCUMENTATION, TOOLS AND SOFTWARE Refer to the following documents, tools and software to aid your design process. Application Notes
- AN1955: Thermal Measurement Methodology of RF Power Amplifiers Software
- .s2p File Development Tools
- Printed Circuit Boards For Software and Tools, do a Part Number search at http://www.freescale.com, and select the Part Number link. Go to the Software & Tools tab on the parts Product Summary page to download the respective tool. FAILURE ANALYSIS At this time failure analysis is limited to electrical signatureanalysis. For updates contact your local Freescale Sales Office.
REVISION HISTORY
The following table summarizes revisions to this document. Revision Date Description 0 Dec. 2010 • Initial Release of Data Sheet
Information in this document is provided solely to enablesystem and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its productsfor any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and allliability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components insystems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributorsharmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2010. All rights reserved. How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) + 3 316 93 54 84 8( F r e n c h ) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1- -8- -1, Shimo- -Meguro, Meguro- -ku, Tokyo 153- -0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MMG20271H Rev. 0, 12/2010