RC_L YAGEO | Alldatasheet
Document overview
- PDF pages: 11
Technical content
GENERAL PURPOSE CHIP RESISTORS RC_L series Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512 RoHS compliant & Halogen free Product specification – August 02, 2022 V.12
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512 SCOPE This specification describes RC series chip resistors with lead free terminations made by thick film process .
APPLICATIONS
All general purpose application
FEATURES
Halogen Free Epoxy RoHS compliant Products with lead free terminations meet RoHS requirements Pb-glass contained in electrodes, resistors element and glass are exempted by RoHS Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production MSL class: MSL 1 GLOBAL PART NUMBER RC XXXX X X X XX XXXX L (1) SIZE 0075/0100/0201/0402/0603/0805/1206/1210/1218/2010/2512 (2) TOLERANCE B = ± 0.1% D = ± 0.5% F = ± 1.0% J = ± 5.0% (for jumper ordering, use code of J) (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel S = ESD safe reel (0075/0100 only) (4) TEMPERATURE COEFFICIENT OF RESISTANCE = Based on spec. (5) TAPING REEL & POWER 07 = 7 inch dia. Reel & Standard power 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel 7W = 7 inch dia. Reel & 2 x standard power 7N = 7 inch dia. Reel, ESD safe reel (0075/0100 only) 3W = 13 inch dia. Reel & 2 x standard power (6) RESISTANCE VALUE There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point Example: 97R6 = 97.6Ω 9K76 = 9760Ω 1M = 1,000,000Ω (7) DEFAULT CODE Letter L is the system default code for ordering only.(Note) ORDERING INFORMATION - GLOBAL PART NUMBER Global part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. ORDERING EXAMPLE The ordering code for a RC0402 0.0625W chip resistor value 100K with 5% tolerance, supplied in 7-inch tape reel of 10,000 units per reel is: RC0402JR -07100K L. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process". 2. On customized label, "LFP" or specific symbol can be printed.
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512 MARKING RC0075 / RC0100 / RC0201 / RC0402 No Marking RC0603 1%, 0.5%,E24 exception values 10/11/13/15/20/75 of E24 series 1%, 0.5%, E96 refer to EIA -96 marking method, including values 10/11/13/15/20/75 of E24 series 5%, E24 series : 3 digits First two digits for significant figure and 3rd digit for number of zeros RC0805 / RC1206 / RC1210 / RC2010 / RC2512 1%, 0.5% , E24/E96 series : 4 digits First three digits for significant figure and 4th digit for number of zeros 5%, E24 series : 3 digits First two digits for significant figure and 3rd digit for number of zeros RC1218 E-24 series: 3 digits, ±5% First two digits for significant figure and 3rd digit for number of zeros Both E -24 and E -96 series: 4 digits, ±1% & ±0.5% First three digits for significant figure and 4th digit for number of zeros For further marking information, please see special data sheet "Chip resistors marking". Fig. 2 240 = 24 × 100 = 24 YNSC037 Fig. 1 ynsc007 Fig. 7 Value = 10 KΩ YNSC099 Fig. 8 Value = 10 KΩ YNSC103 Fig. 6 Value = 10 KΩ YNSC001 YNSC038 Fig. 3 88A = 806 × 100 = 806 Ω YNSC001 Fig. 4 Value = 10 KΩ Fig. 5 Value = 10 KΩ YNSC004
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512 CONSTRUCTION The resistor is constructed on top of a high -grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent envi ronmental influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Ni -barrier) are added, as shown in Fig. 9. TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) DIMENSION Table 1 Fig. 9 Chip resistor outlines OOuuttlliinneess For dimensions, please refer to Table 1 overcoat primary glass layer resistive layer (Jumper chip is a conductor) inner electrode termination(Ni/matte tin) ceramic substrate marking layer overcoat inner electrode YNSC086 W L H
ELECTRICAL CHARACTERISTICS
Fig. 4 Chip resistor outlines Table 2 CHARAC- TERISTICS POWER OPERATING TEMPERATURE RANGE MAXIMUM WORKING VOLTAGE MAXIMUM OVERLOAD VOLTAGE DIELECTRIC WITHSTANDING VOLTAGE RESISTANCE RANGE TEMPERATURE COEFFICIENT JUMPER CRITERIA RC0075 1/50 W -55 to 125 10V 25V 25V 5% (E24) R 1% (E24/E96) R Jumper<50m R<100 -200~+600ppm 100 R ±200ppm Rated Current 0.5A Maximum Current 1.0A RC0100 1/32 W -55 to 125 15V 30V 30V 5% (E24) R 22M 1% (E24/E96) R 10M 0.5% (E24/E96) R 470K Jumper<50m R<10 -200~+600ppm ≤ R < 100 ±300ppm/°C 100 ≤ R ≤ 10M : ±200ppm/°C 10M < R ≤ 22M : ±250ppm/°C Rated Current 0.5A Maximum Current 1.0A
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512 CHARAC- TERISTICS POWER OPERATING TEMPERATURE RANGE MAXIMUM WORKING VOLTAGE MAXIMUM OVERLOAD VOLTAGE DIELECTRIC WITHSTANDING VOLTAGE RESISTANCE RANGE TEMPERATURE COEFFICIENT JUMPER CRITERIA RC0201 1/20 W -55 to 125 25V 50V 50V 5% (E24) R 10M 1% (E24/E96) R 10M 0.5% (E24/E96) R 0.1% (E24/E96) R Jumper<50m R -100~+350ppm 10M ±200ppm Rated Current 0.5A Maximum Current 1.0A RC0402 1/16 W -55 to 155 50V 100V 100V 5% (E24) R 22M 1% (E24/E96) R 10M 0.5% (E24/E96) R 0.1% (E24/E96) R Jumper<50m R ±200ppm 10M ±100ppm 10M 22M ±200ppm Rated Current 1.0A Maximum Current 2.0A 1/8W -55 to 155 50V 100V 100V 5% (E24) R 1% (E24/E96) R R ±200ppm RC0603 1/10 W -55 to 155 75V 150V 150V 5% (E24) R 22M 1% (E24/E96) R 10M 0.5% (E24/E96) R 0.1% (E24/E96) R Jumper<50m R ±200ppm 10M ±100ppm 10M 22M ±200ppm Rated Current 1.0A Maximum Current 2.0A 1/5 W -55 to 155 75V 150V 150V 5% (E24) R 1% (E24/E96) R R ±200ppm RC0805 1/8 W -55 to 155 150V 300V 300V 5% (E24) R 100M 1% (E24/E96) R 10M 0.5% (E24/E96) R 0.1% (E24/E96) R 10%, 20% (E24) 24M R 100M Jumper<50m R ±200ppm 10M ±100ppm 10M 22M ±200ppm 24M 100M 300ppm Rated Current 2.0A Maximum Current 5.0A 1/4 W -55 to 155 150V 300V 300V 5% (E24) R 1% (E24/E96) R R ±200ppm Table 2
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512 CHARAC- TERISTICS POWER OPERATING TEMPERATURE RANGE MAXIMUM WORKING VOLTAGE MAXIMUM OVERLOAD VOLTAGE DIELECTRIC WITHSTANDING VOLTAGE RESISTANCE RANGE TEMPERATURE COEFFICIENT JUMPER CRITERIA RC1206 1/4 W -55 to 155 200V 400V 500V 5% (E24) R 100M 1% (E24/E96) R 10M 0.5% (E24/E96) R 0.1% (E24/E96) R 10%, 20% (E24) 24M R 100M Jumper<50m R ±200ppm 10M ±100ppm 10M 22M ±200ppm 24M R 100M 300ppm Rated Current 2.0A Maximum Current 10.0A 1/2 W -55 to 155 200V 400V 500V 5% (E24) R 1% (E24/E96) R R ±200ppm RC1210 1/2 W -55 to 155 200V 500V 500V 5% (E24) R 22M 1% (E24/E96) R 10M R Jumper<50m R ±200ppm 10M ±100ppm 10M 22M ±200ppm Rated Current 2.0A Maximum Current 10.0A RC1218 1 W -55 to 155 200V 500V 500V 5% (E24) R 1% (E24/E96) R R Jumper<50m R ±200ppm ±100ppm Rated Current 6.0A Maximum Current 10.0A RC2010 3/4 W -55 to 155 200V 500V 500V 5% (E24) R 22M 1% (E24/E96) R 10M R Jumper<50m R ±200ppm 10M ±100ppm 10M 22M ±200ppm Rated Current 2.0A Maximum Current 10.0A RC2512
1 W -55
5% (E24) R 22M 1% (E24/E96) R 10M R Jumper<50m R ±200ppm 10M ±100ppm 10M 22M ±200ppm Rated Current 2.0A Maximum Current 10.0A
2 W -55
5% (E24) R 1% (E24/E96) R R ±200ppm FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting” Table 2
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512 FUNCTIONAL DESCRIPTION OOPPEERRAATTIINNGG TTEEMMPPEERRAATTUURREE RRAANNGGEE RC0402 to RC2512 Range: -55 to +155 (Fig. 10 -1) RC0075 to RC0201 Range: -55 to +125 (Fig. 10 -2) PPOOWWEERR RRAATTIINNGG Each type rated power at 70 RC0075=1/50W RC0100=1/32W RC0201=1/20 W RC0402=1/16W , 1/8W RC0603=1/10W , 1/5W RC0805=1/8W , 1/4W RC1206=1/4W , 1/2W RC1210=1/2W RC1218=1W RC2010=3/4W RC2512=1W , 2W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = )(PxR or max. working voltage whichever is less Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (Ω) PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE PAPER TAPING REEL (R) ESD SAFE REEL (S) (4MM WIDTH, 1MM PITCH PLASTIC EMBOSSED) EMBOSSED TAPING REEL REEL DIMENSION 7" (178 mm) 10" (254mm) 13" (330 mm) 7" (178 mm) 7" (178 mm) 13" (330 mm) RC0100 20000 --- 80000 40000 --- --- RC0201 10000 20000 50000 --- --- --- RC0402 10000 20000 50000 --- --- --- NOTE For tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”. Fig. 10-2 Maximum dissipation (P) in percentage of rated poweras a function of the operating ambient temperature (Tamb) handbook, halfpage MLB206 70 10055 50 Tamb( C)o (%P )rated 100 125 Pmax Fig. 10-1 Maximum dissipation (P) in percentage of rated poweras a function of the operating ambient temperature (Tamb) MRA632 70 100 55 50 Tamb ( (%Prated) 100 155 Pmax
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512 TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Coefficient of Resistance (T.C.R.) MIL-STD-202 Method 304 At +25/–55°C and +25/+125°C Refer to table 2 Formula: T.C.R= )tt(R RR 121 − × 106 (ppm/°C) Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Life/ Endurance MIL-STD-202 Method 108 IEC 60115-1 7.1 At 70± 2°C for 1,000 hours; RCWV applied for 1.5 hours on and 0.5 hour off, still air required 0075: ± (5%+100mΩ) <100mΩ for jumper <100mΩ for jumper Others: ± (1%+50mΩ) for B/D/F tol ± (3%+50mΩ) for J tol <100mR for jumper High Temperature Exposure MIL-STD-202 Method 108 IEC 60068-2-2 1,000 hours at maximum operating temperature depending on specification, unpowered. 0075: ± (5%+100mΩ) <100mΩ for jumper < 50mΩ for jumper Others: ± (1%+50mΩ) for B/D/F tol ± (2%+50mΩ) for J tol <50mR for jumper Moisture Resistance MIL-STD-202 Method 106 Each temperature / humidity cycle is defined at 8 hours, 3 cycles / 24 hours for 10d with 25°C / 65°C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts 0075: ± (2%+100mΩ) <100mΩ for jumper < 100mΩ for jumper Others: ± (0.5%+50mΩ) for B/ D/F tol ± (2%+50mΩ) for J tol <100mR for jumper Humidity IEC 60115-1 10.4 Steady state for 1000 hours at 40°C / 95% R.H. RCWV applied for 1.5 hours on and 0.5 hour off 0075: ± (5%+100mΩ) no visible damage < 100mΩ for jumper Others: ± (1%+50mΩ) for B/D/F tol ± (2%+50mΩ) for J tol <100mR for jumper Table 4 T est condition, procedure and requirements
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512 Thermal Shock MIL-STD-202 Method 107 -55/+125°C Note Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air - Air < 50mΩ for jumper Others: ± (0.5%+50mΩ) for B/D/F tol ± (1%+50mΩ) for J tol < 50mR for jumper Short Time Overload IEC 60115-1 8.1 2.5 times RCWV or maximum overload voltage which is less for 5 seconds at room temperature < 50mΩ for jumper Others: ± (1%+50mΩ) for B/D/F tol ± (2%+50mΩ) for J tol <50mR for jumper No visible damage Board Flex/ Bending IEC 60115-1 9.8 Device mounted or as described only 1 board bending required bending time: 60± 5 seconds 0075/0100/0201/0402:5mm; 0603/0805:3mm; 1206 and above:2mm < 50mΩ for jumper Others: ± (1%+50mΩ) for B/D/F/J tol <50mR for jumper No visible damage Solderability - Wetting J-STD-002 test B1 Electrical Test not required Magnification 50X SMD conditions: 1st step: method B1, aging 4 hours at 155°C dry heat 2nd step: leadfree solder bath at 245± 3°C Dipping time: 3± 0.5 seconds Well tinned (>95% covered) No visible damage -Leaching J-STD-002 test D Leadfree solder ,260°C, 30 seconds immersion time No visible damage -Resistance to Soldering Heat MIL-STD-202 Method 210 IEC 60115-1 4.18 Condition B, no pre-heat of samples Leadfree solder, 260°C ± 5°C, 10 ± 1 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol 0075: ± (3%+50mΩ) <50mΩ for jumper < 50mΩ for jumper Others: ± (0.5% +50mΩ) for B/D/F tol. ± (1% +50mΩ) for J tol. <50mR for jumper No visible damage
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512
REVISION HISTORY
TYPE POWER TOLERANCE RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE PF ± 1% ± 2% ± 5% 5 m R < 100 m 75 ppm/°C 0805 1/8W, 1/4W, 1/3W, 1/2W 4 m R < 100 m 1206 1/4W, 1/2W 3 m R < 100 m 2010 1/2W, 1W The resistors are constructed using outstanding TCR level material, which makes Yageo PF resistors excellent for current sensing application in battery charger circuit & DC-DC converter. The composition of the resistive material is adjusted to give the approximate required resistance and is covered with a protective coating, which printed with the resistance value. Finally, the three external terminations (Ni / matte Tin) are added, as shown in Fig. 4. 5 m R < 100 m 2512 1W, 2W 1 m R < 100 m 3W 1 m R 50 m 4527 2W, 3W, 5W 6 m R < 1 NOTE: 1. PLEASE CONTACT WITH SALES OFFICES, DISTRIBUTORS AND REPRESENTATIVES IN YOUR REGION BEFORE ORDERING REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 12 Aug. 02, 2022 - - I2 dimension updated, for size 1206, size 2010, size 2512. Version 11 May 15, 2020 - - Extend RC0201, RC0402, RC0603, RC0805, RC1206 D tol resistance range to 1ohm Version 10 Dec. 12, 2018 - - Updated 0075 dimensions Version 9 Mar. 06, 2018 - - Add 0.5%/1% marking rule for RC0603 ~ RC2512 based on marking datasheet Version 8 July 10, 2017 - - Add "3W" part number coding for 13" Reel & double power Version 7 Mar. 7, 2017 - - Add 10" packing Version 6 Feb.15, 2017 - - Extend RC0805 and RC1206 resistance range to 100Mohm Version 5 Oct. 06, 2016 - - Description: Update Dimension of I2 of RC2512 (2W) Version 4 Jan. 22, 2016 - - Update resistance range Version 3 Dec. 24, 2015 - - Updated test and requirements Version 2 Jul. 23, 2015 - - Updated test and requirements Version 1 Jan. 21, 2015 - - ESD Safe Reel update Version 0 Dec. 15, 2014 - - First issue of this specification
Chip Resistor Surface Mount www.yageo.com Aug. 02, 2022 V.12 Product specification SERIES RC_L 0075 to 2512 LEGAL DISCLAIMER YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheet s, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice. YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any part icular purpose or the continuing production of any of its products. To the maximum extent permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability. YAGEO products are designed for general purpose applicatio ns under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Ae rospace equipment (artificial satellite, rocket, etc.), Atomic energy -related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipme nt, data -processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety equipment, Traffic signal equipment, Transportation equipment and Undersea equipment, or for any other application or use in which the failure o f YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space f light. Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.