RC0201FR-07470RL YAGEO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

GENERAL PURPOSE CHIP RESISTORS RC0201 5%, 1%, 0.5% RoHS compliant & Halogen free Product specification – May 02, 2011 V.8 Supersedes Date of Mar. 06, 2003

Chip Resistor Surface Mount www.yageo.com May 02, 2011 V.8 Product specification SERIESRC 0201 YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) RC0201 X R - XX XXXX L (1) TOLERANCE D = ±0.5% F = ±1% J = ±5% (for Jumper ordering, use code of J) (2) PACKAGING TYPE R = Paper / PE taping reel (3) TEMPERATURE COEFFICIENT OF RESISTANCE – = Based on spec. (4) TAPING REEL 07 = 7 inch dia. Reel 7C = 7 inch dia. Reel, 1.5 x Standard Quantity 7D = 7 inch dia. Reel, 2 x Standard Quantity 13 = 13 inch dia. Reel (5) RESISTANCE VALUE There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed coding rules of resistance are shown in the table of “Resistance rule of global part number”. (6) DEFAULT CODE Letter L is system default code for ordering only. (Note) ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. SCOPE This specification describes RC0201 series chip resistors with lead-free terminations made by thick film process.

APPLICATIONS

z All general purpose application

FEATURES

  • Products with lead free terminations meet RoHS requirements. - Pb-glass contained in electrodes, resistor element and glass are exempted by RoHS. z Reduce environmentally hazardous wastes z High component and equipment reliability z Save of PCB space z None forbidden-materials used in products/production. O RDERING EXAMPLE The ordering code of a RC0201 chip resistor, value 56 X with ±1% tolerance, supplied in 7-inch tape of 15,000 units per reel is: RC0201FR-7C56RL. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process". 2. On customized label, "LFP" or specific symbol can be printed. Resistance rule of global part number Resistance code rule Example D1 D1 = Dumm y 0R 0R = Jumpe r XRXX (1 to 9.76 Ω) 1R = 1 Ω 1R5 = 1.5 Ω 9R76 = 9.76 Ω XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 to 9.76 MΩ) 1M = 1,000,000 Ω 9M76= 9,760,000 Ω

Chip Resistor Surface Mount www.yageo.com May 02, 2011 V.8 Product specification SERIESRC 0201 PPHHYYCCOOMMPP BBRRAANNDD oorrddeerriinngg ccooddeess Both GLOBAL PART NUMBER (preferred) and 12NC (t raditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER an d ordering example, please refer to page 2. 12NC CODE

2322 XXX XX XXX L

(1) (2) (3) (4) PAPER / PE TAPE ON REEL (units) (2)TYPE/ 0201 START IN (1) TOL. (%) RESISTANCE RANGE 10,000 20,000 50,000 RC41 2322 ±5% 1 to 1 M Ω 803 70xxx 806 80xxx 803 60xx x RC42 2322 ±1% 1 to 1 M Ω 806 7xxxx 806 8xxxx 806 6xxxx Jumper 2322 - 0 Ω 803 91001 --- --- Dummy 2322 - - 803 93001 --- --- (1) The resistors have a 12-digit ordering code starting with 2322. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of “Last digit of 12NC”. (4) Letter L is system default code for order only. (Note) ORDERING EXAMPLE The ordering code of a RC42 resistor, value 56 X with ±1% tolerance, supplied in tape of 10,000 units per reel is: 232280675609L or RC0201FR-0756RL. Resistance decade (3) Last digit 0.01 to 0.0976 X 0 0.1 to 0.976 X 7 1 to 9.76 X 8 10 to 97.6 X 9 100 to 976 X 1 1 to 9.76 KX 2 10 to 97.6 KX 3 100 to 976 KX 4 1 to 9.76 MX 5 10 to 97.6 MX 6 Example: 0.02 X = 0200 or 200

0.3 X = 3007 or 307

1 X = 1008 or 108

33 K X = 3303 or 333

10 M X = 1006 or 106

  1. All our RSMD products meet RoHS compliant and Halogen Free. "L FP" of the internal 2D reel label mentions "Lead Free Process". 2. On customized label, "LFP" or specific symbol can be printed.

Chip Resistor Surface Mount www.yageo.com May 02, 2011 V.8 Product specification SERIESRC 0201 CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Ni-barrier) are added, as shown in Fig.2. MARKING RC0201 No marking For further marking information, please refer to data sheet “Chip resistors marking”. Fig. 1 ynsc007 DIMENSIONS TYPE RC0201 L (mm) 0.60 ±0.03 W (mm) 0.30 ±0.03 H (mm) 0.23 ±0.03 I1 (mm) 0.10 ±0.05 I2 (mm) 0.15 ±0.05 Table 1 overcoat protective glass resistive layer (Jumper chip is a conductor) inner electrode termination(Ni/matte tin) ceramic substrate H YNSC056 overcoat W L inner electrode OOUUTTLLIINNEESS For dimension, please refer to Table 1 Fig. 2 Chip resistor outlines

Chip Resistor Surface Mount www.yageo.com May 02, 2011 V.8 Product specification SERIESRC 0201

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS RC0201 1/20 W Operating Temperature Range –55 °C to +125 °C Maximum Working Voltage 25 V Maximum Overload Voltage 50 V Dielectric Withstanding Voltage 50 V 5% (E24) 1 Ω to 10 MΩ 1% (E24/E96) 1 Ω to 10 MΩ 0.5% (E24/E96) 10 Ω to 1 MΩ Resistance Range Jumper < 0.05 Ω 1 Ω ≤ R ≤ 10 Ω -100/+350 ppm/°CTemperature Coefficient 10 Ω < R ≤ 10 MΩ ±200 ppm/°C Rated Current 0.5 AJumper Criteria Maximum Current 1.0 A FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting”. Table 2 PACKING STYLE AND PACKAGING QUANTITY PRODUCT TYPE PACKING STYLE REEL DIMENSION QUANTITY PER REEL RC0201 Paper / PE Taping Reel (R) 7" (178 mm) 10,000/15,000/20,000 units 13" (330 mm) 50,000 units NOTE 1. For paper/PE tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”. 2. For size of 0201, standard quantity is 10,000 units per reel. Table 3 Packing style and packaging quantity P handbook, halfpage MLB206_1 70 10055 50 Tamb( C)o (%P ) rated 100 125 FUNCTIONAL DESCRIPTION PPOOWWEERR RRAATTIINNGG RC0201 rated power at 70°C is 1/20 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=√(P X R) or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (V) P=Rated power (W) R=Resistance value ( X) Fig. 3 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (T amb)

Chip Resistor Surface Mount www.yageo.com May 02, 2011 V.8 Product specification SERIESRC 0201 TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS At +25/–55 °C and +25/+125 °C Temperature Coefficient of Resistance (T.C.R.) IEC 60115-1 4.8 Formula: Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Refer to table 2 Life/Endurance IEC 60115-1 4.25.1 At 70±5 °C for 1,000 hours, RCWV applied for 1.5 hours on, 0.5 hour off, still air required ±(1.0%+0.05 Ω) for 1%, 0.5% tol. ±(3.0%+0.05 Ω for 5% tol. <100 mΩ for Jumper High Temperature Exposure/ Endurance at Upper Category Temperature IEC 60068-2-2 1,000 hours at 125±5 °C, unpowered ±(1.0%+0.05 Ω) for 1%, 0.5% tol. ±(2.0%+0.05 Ω) for 5% tol. <50 mΩ for Jumper Moisture Resistance MIL-STD-202G Method-106G Each temperature / humidity cycle is defined at 8 hours, 3 cycles / 24 hours for 10d. with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion ±(0.5%+0.05 Ω) for 1%, 0.5% tol. ±(2.0%+0.05 Ω) for 5% tol. <100 mΩ for Jumper Thermal Shock MIL-STD-202G Method-107G -55/+125 °C Number of cycles required is 300. Devices unmounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ±(0.5%+0.05 Ω) for 1%, 0.5% tol. ±(1%+0.05 Ω) for 5% tol. <50 mΩ for Jumper Table 4 Test condition, procedure and requirements R2–R1 R1(t2–t1)

Chip Resistor Surface Mount www.yageo.com May 02, 2011 V.8 Product specification SERIESRC 0201 TEST TEST METHOD PROCEDURE REQUIREMENTS Short Time Overload IEC60115-1 4.13 2.5 times of rated voltage or maximum overload voltage whichever is less for 5 sec at room temperature ±(1.0%+0.05 Ω) for 1%, 0.5% tol. ±(2.0%+0.05 Ω) for 5% tol. <50 mΩ for Jumper No visible damage Board Flex/ Bending IEC 60068-2-21 Chips mounted on a 90mm glass epoxy resin PCB (FR4) 5 mm bending Bending time: 60±5 seconds ±(1.0%+0.05 Ω) <50 mΩ for Jumper No visible damage Low Temperature Operation IEC 60068-2-1 The resistor shall be subjected to a DC rated voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C This constitutes shall be repeated for 96 hours However the applied voltage shall not exceed the maximum operating voltage ±(0.5%+0.05 Ω) for 1%, 0.5% tol. ±(1.0%+0.05 Ω) for 5% tol. No visible damage Insulation Resistance IEC 60115-1 4.6 Rated continuous overload voltage (RCOV) for 1 minute Type RC0201 Voltage (DC) 50 V ≥10 GΩ Dielectric Withstand Voltage IEC 60115-1 4.7 Maximum voltage (Vrms) applied for 1 minute Type RC0201 Voltage (AC) 50 Vrms No breakdown or flashover Resistance to Solvent IPC/JEDEC J-STD-020D lsopropylalcohol (C3H7OH) followed by brushing No smeared Noise IEC 60115-1 4.12 Maximum voltage (Vrms) applied Resistors range Value R < 100 Ω 10 dB 100 Ω ≤ R < 1 KΩ 20 dB

1 KΩ ≤ R < 10 KΩ 30 dB

10 KΩ ≤ R < 100 KΩ 40 dB

100 KΩ ≤ R < 1 MΩ 46 dB

1 MΩ ≤ R ≤ 22 MΩ 48 dB

Chip Resistor Surface Mount www.yageo.com May 02, 2011 V.8 Product specification SERIESRC 0201 TEST TEST METHOD PROCEDURE REQUIREMENTS Humidity IEC 60115-1 4.21 Steady state for 1000 hours at 40 °C / 95% R.H. RCWV applied for 1.5 hours on and 0.5 hour off ±(1.0%+0.05 Ω) for 1%, 0.5% tol. ±(2.0%+0.05 Ω) for 5% tol. <100 mΩ for Jumper Intermittent Overload IEC 60115-1 4.39 2.5 times of rated voltage or maximum overload voltage whichever is less for 1 second on and 25 seconds off; total 10,000 cycles ±(1.0%+0.05 Ω) for 1%, 0.5% tol. ±(2.0%+0.05 Ω) for 5% tol. <100 mΩ for Jumper Solderability - Wetting IPC/JEDEC J-STD-002B test B Electrical Test not required Magnification 50X SMD conditions: st step: method B, aging 4 hours at 155 °C dry heat 2nd step: lead-free solder bath at 245±3 °C Dipping time: 3±0.5 seconds Well tinned (≥95% covered) No visible damage - Leaching IPC/JEDEC J-STD-002B test D Lead-free solder, 260 °C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat IEC 60068-2-58 Condition B, no pre-heat of samples Lead-free solder, 260 °C, 10 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ±(0.5%+0.05 Ω) for 1%, 0.5% tol. ±(1.0%+0.05 Ω) for 5% tol. <50 mΩ for Jumper No visible damage

Chip Resistor Surface Mount www.yageo.com May 02, 2011 V.8 Product specification SERIESRC 0201

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 8 May 02, 2011 - - Add ±0.5% tolerance for RC0201 - Add new taping reel code of 7 inch dia. reel with 1.5 x standard quantity (15,000 units per reel) - 10" taping reel removed Version 7 Jan 06, 2011 - - Typo updated Version 6 Apr 27, 2010 - - Updated test items and methods - Add new taping reel code of 7 inch dia. reel with double standard quantity (20,000 units per reel) Version 5 Nov 10, 2009 - - Test items and methods updated - Test requirements upgraded - Resistance range extend Version 4 Jul 15, 2008 - - Description of "Halogen Free Epoxy" added - Define global part number Version 3 Apr 25, 2007 - - New datasheet for 0201 thick film 1% and 5% with lead-free terminations - Replace the 0201 part of pdf files: Pu-RC0201_51_PbFree_L_2 and Yu- RC0201_51_PbFree_L_2 - Max. working voltage, resistance rage, and TCR updated - Tests and Requirements updated Version 2 Sep 03, 2004 - - New datasheet for 0201 thick film 1% and 5% with lead-free terminations - Replace the 0201 part of pdf files: RC41_5_4, RC42_1_1 - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape) “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.”