RC0075BR-0797R6L YAGEO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
GENERAL PURPOSE CHIP RESISTORS RC_L series Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512 RoHS compliant & Halogen free Product specification – February 17, 2017 V.6
Chip Resistor Surface Mount www.yageo.com Feb. 17, 2017 V.5 Product specification SERIES RC_L 0075 to 2512 SCOPE This specification describes RC series chip resistors with lead free terminations made by thick film process .
APPLICATIONS
All general purpose application
FEATURES
Halogen Free Epoxy RoHS compliant Products with lead free terminations meet RoHS requirements Pb-glass contained in electrodes, resistors element and glass are exempted by RoHS Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production GLOBAL PART NUMBER RC XXXX X X X XX XXXX L (1) SIZE 0075/0100/0201/0402/0603/0805/1206/1210/1218/2010/2512 (2) TOLERANCE B = ± 0.1% D = ± 0.5% F = ± 1.0% J = ± 5.0% (for jumper ordering, use code of J) (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel S = ESD safe reel (0075/0100 only) (4) TEMPERATURE COEFFICIENT OF RESISTANCE － = Based on spec. (5) TAPING REEL 07 = 7 inch dia. Reel 13 =13 inch dia. Reel 7W = 7 inch dia. Reel & 2 x standard power 7N = 7 inch dia. Reel, ESD safe reel (0075/0100 only) (6) RESISTANCE VALUE There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point Example: 97R6 = 97.6Ω 9K76 = 9760Ω 1M = 1,000,000Ω (7) DEFAULT CODE Letter L is the system default code for ordering only.(Note) ORDERING INFORMATION - GLOBAL PART NUMBER Global part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. ORDERING EXAMPLE The ordering code for a RC0402 0.0625W chip resistor value 100K Ωwith ±5% tolerance, supplied in 7-inch tape reel of 10,000 units per reel is: RC0402JR -07100K L. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process". 2. On customized label, "LFP" or specific symbol can be printed.
Chip Resistor Surface Mount www.yageo.com Feb. 17, 2017 V.5 Product specification SERIES RC_L 0075 to 2512 MARKING RC0075 / RC0100 / RC0201 / RC0402 No Marking RC0603 E24 series: 3 digits First two digits for significant figure and 3rd digit for number of zeros RC0805 / RC1206 / RC1210 / RC2010 / RC2512 E24/E96 series: 4 digits First three digits for significant figure and 4th digit for number of zeros RC1218 E-24 series: 3 digits, ±5% First two digits for significant figure and 3rd digit for number of zeros Both E -24 and E -96 series: 4 digits, ±1% & ±0.5% First three digits for significant figure and 4th digit for number of zeros For further marking information, please see special data sheet "Chip resistors marking". Fig. 2 Value = 10 KΩ PF series Note: construction will be adjusted to resistance value (only for PF series). Fig. 3 Value = 10 KΩ CONSTRUCTION The resistor is constructed on top of a high -grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environmental influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Ni -barrier) are added, as shown in Fig. 6. Fig. 1 Fig. 4 Value = 10 KΩ Fig. 5 Value = 10 KΩ Fig. 6 Chip resistor outlines OOuuttlliinneess For dimensions, please refer to Table 1
Chip Resistor Surface Mount www.yageo.com Feb. 17, 2017 V.5 Product specification SERIES RC_L 0075 to 2512 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) DIMENSION Table 1
ELECTRICAL CHARACTERISTICS
Fig. 4 Chip resistor outlines Table 2 CHARAC- TERISTICS POWER OPERATING TEMPERATURE RANGE MAXIMUM WORKING VOLTAGE MAXIMUM OVERLOAD VOLTAGE DIELECTRIC WITHSTANDING VOLTAGE RESISTANCE RANGE TEMPERATURE COEFFICIENT JUMPER CRITERIA RC0075 1/50 W -55℃ to 125℃ 10V 25V 25V 5% (E24) 10Ω≦R≦1MΩ 1% (E24/E96) 10Ω≦R≦1MΩ Jumper<50mΩ 10Ω≦R<100Ω -200~+600ppm℃ 100Ω≦R≦1MΩ ±200ppm℃ Rated Current 0.5A Maximum Current 1.0A RC0100 1/32 W -55℃ to 125℃ 15V 30V 30V 5% (E24) 1Ω≦R≦22MΩ 1% (E24/E96) 1Ω≦R≦10MΩ 0.5% (E24/E96) 33Ω≦R≦470KΩ Jumper<50mΩ 1Ω≦R<10Ω -200~+600ppm℃ 10Ω≤ R < 100Ω: ±300ppm/°C 100Ω≤ R ≤ 10MΩ: ±200ppm/°C 10MΩ< R ≤ 22MΩ: ±250ppm/°C Rated Current 0.5A Maximum Current 1.0A RC0201 1/20 W -55℃ to 125℃ 25V 50V 50V 5% (E24) 1Ω≦R≦10MΩ 1% (E24/E96) 1Ω≦R≦10MΩ 10Ω≦R≦1MΩ Jumper<50mΩ 1Ω≦R≦10Ω -100~+350ppm℃ 10Ω<R≦10MΩ ±200ppm℃ Rated Current 0.5A Maximum Current 1.0A
Chip Resistor Surface Mount www.yageo.com Feb. 17, 2017 V.5 Product specification SERIES RC_L 0075 to 2512 CHARAC- TERISTICS POWER OPERATING TEMPERATURE RANGE MAXIMUM WORKING VOLTAGE MAXIMUM OVERLOAD VOLTAGE DIELECTRIC WITHSTANDING VOLTAGE RESISTANCE RANGE TEMPERATURE COEFFICIENT JUMPER CRITERIA RC0402 1/16 W -55℃ to 155℃ 50V 100V 100V 5% (E24) 1Ω≦R≦22MΩ 1% (E24/E96) 1Ω≦R≦10MΩ 10Ω≦R≦1MΩ Jumper<50mΩ 1Ω≦R≦10Ω ±200ppm℃ 10Ω<R≦10MΩ ±100ppm℃ 10MΩ<R≦22MΩ ±200ppm℃ Rated Current 1.0A Maximum Current 2.0A 1/8W -55℃ to 155℃ 50V 100V 100V 5% (E24) 1Ω≦R≦1MΩ 1% (E24/E96) 1Ω≦R≦1MΩ 1Ω≦R≦1MΩ ±200ppm℃ RC0603 1/10 W -55℃ to 155℃ 75V 150V 150V 5% (E24) 1Ω≦R≦22MΩ 1% (E24/E96) 1Ω≦R≦10MΩ 10Ω≦R≦1MΩ Jumper<50mΩ 1Ω≦R≦10Ω ±200ppm℃ 10Ω<R≦10MΩ ±100ppm℃ 10MΩ<R≦22MΩ ±200ppm℃ Rated Current 1.0A Maximum Current 2.0A 1/5 W -55℃ to 155℃ 75V 150V 150V 5% (E24) 1Ω≦R≦1MΩ 1% (E24/E96) 1Ω≦R≦1MΩ 1Ω≦R≦1MΩ ±200ppm℃ RC0805 1/8 W -55℃ to 155℃ 150V 300V 300V 5% (E24) 1Ω≦R≦100MΩ 1% (E24/E96) 1Ω≦R≦10MΩ 10Ω≦R≦1MΩ 10%, 20% (E24) 24MΩ≦R≦100MΩ Jumper<50mΩ 1Ω≦R≦10Ω ±200ppm℃ 10Ω<R≦10MΩ ±100ppm℃ 10MΩ<R≦22MΩ ±200ppm℃ 24MΩ<R≦100MΩ ±300ppm℃ Rated Current 2.0A Maximum Current 5.0A 1/4 W -55℃ to 155℃ 150V 300V 300V 5% (E24) 1Ω≦R≦1MΩ 1% (E24/E96) 1Ω≦R≦1MΩ 1Ω≦R≦1MΩ ±200ppm℃ RC1206 1/4 W -55℃ to 155℃ 200V 400V 500V 5% (E24) 1Ω≦R≦100MΩ 1% (E24/E96) 1Ω≦R≦10MΩ 10Ω≦R≦1MΩ 10%, 20% (E24) 24MΩ≦R≦100MΩ Jumper<50mΩ 1Ω≦R≦10Ω ±200ppm℃ 10Ω<R≦10MΩ ±100ppm℃ 10MΩ<R≦22MΩ ±200ppm℃ 24MΩ≦R≦100MΩ ±300ppm℃ Rated Current 2.0A Maximum Current 10.0A 1/2 W -55℃ to 155℃ 200V 400V 500V 5% (E24) 1Ω≦R≦1MΩ 1% (E24/E96) 1Ω≦R≦1MΩ 1Ω≦R≦1MΩ ±200ppm℃ Table 2
Chip Resistor Surface Mount www.yageo.com Feb. 17, 2017 V.5 Product specification SERIES RC_L 0075 to 2512 CHARAC- TERISTICS POWER OPERATING TEMPERATURE RANGE MAXIMUM WORKING VOLTAGE MAXIMUM OVERLOAD VOLTAGE DIELECTRIC WITHSTANDING VOLTAGE RESISTANCE RANGE TEMPERATURE COEFFICIENT JUMPER CRITERIA RC1210 1/2 W -55℃ to 155℃ 200V 500V 500V 5% (E24) 1Ω≦R≦22MΩ 1% (E24/E96) 1Ω≦R≦10MΩ 10Ω≦R≦1MΩ Jumper<50mΩ 1Ω≦R≦10Ω ±200ppm℃ 10Ω<R≦10MΩ ±100ppm℃ 10MΩ<R≦22MΩ ±200ppm℃ Rated Current 2.0A Maximum Current 10.0A RC1218 1 W -55℃ to 155℃ 200V 500V 500V 5% (E24) 1Ω≦R≦1MΩ 1% (E24/E96) 1Ω≦R≦1MΩ 10Ω≦R≦1MΩ Jumper<50mΩ 1Ω≦R≦10Ω ±200ppm℃ 10Ω<R≦1MΩ ±100ppm℃ Rated Current 6.0A Maximum Current 10.0A RC2010 3/4 W -55℃ to 155℃ 200V 500V 500V 5% (E24) 1Ω≦R≦22MΩ 1% (E24/E96) 1Ω≦R≦10MΩ 10Ω≦R≦1MΩ Jumper<50mΩ 1Ω≦R≦10Ω ±200ppm℃ 10Ω<R≦10MΩ ±100ppm℃ 10MΩ<R≦22MΩ ±200ppm℃ Rated Current 2.0A Maximum Current 10.0A RC2512
1 W -55℃ to 155℃ 200V 500V 500V
5% (E24) 1Ω≦R≦22MΩ 1% (E24/E96) 1Ω≦R≦10MΩ 10Ω≦R≦1MΩ Jumper<50mΩ 1Ω≦R≦10Ω ±200ppm℃ 10Ω<R≦10MΩ ±100ppm℃ 10MΩ<R≦22MΩ ±200ppm℃ Rated Current 2.0A Maximum Current 10.0A
2 W -55℃ to 155℃ 200V 400V 500V
5% (E24) 1Ω≦R≦1MΩ 1% (E24/E96) 1Ω≦R≦1MΩ 1Ω≦R≦1MΩ ±200ppm℃ FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting” Table 2
Chip Resistor Surface Mount www.yageo.com Feb. 17, 2017 V.5 Product specification SERIES RC_L 0075 to 2512 FUNCTIONAL DESCRIPTION OOPPEERRAATTIINNGG TTEEMMPPEERRAATTUURREE RRAANNGGEE RC0402 to RC2512 Range: -55℃ to +155 ℃ (Fig. 7 -1) RC0075 to RC0201 Range: -55℃ to +125 ℃ (Fig. 7 -2) PPOOWWEERR RRAATTIINNGG Each type rated power at 70 °C: RC0075=1/50W RC0100=1/32W RC0201=1/20 W RC0402=1/16W , 1/8W RC0603=1/10W , 1/5W RC0805=1/8W , 1/4W RC1206=1/4W , 1/2W RC1210=1/2W RC1218=1W RC2010=3/4W RC2512=1W , 2W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = )(PxR or max. working voltage whichever is less Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (Ω) PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE PAPER TAPING REEL (R) ESD SAFE REEL (S) (4MM WIDTH, 1MM PITCH PLASTIC EMBOSSED) EMBOSSED TAPING REEL REEL DIMENSION 7" (178 mm) 13" (330 mm) 7" (178 mm) 7" (178 mm) RC0100 20,000 80,000 40,000 --- NOTE For tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”. Fig. 7-2 Maximum dissipation (P) in percentage of rated poweras a function of the operating ambient temperature (Tamb) Fig. 7-1 Maximum dissipation (P) in percentage of rated poweras a function of the operating ambient temperature (Tamb)
Chip Resistor Surface Mount www.yageo.com Feb. 17, 2017 V.5 Product specification SERIES RC_L 0075 to 2512 TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Coefficient of Resistance (T.C.R.) MIL-STD-202 Method 304 At +25/–55 °C and +25/+125 °C Refer to table 2 Formula: T.C.R= )tt(R RR 121 × 106 (ppm/°C) Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Life/ Endurance MIL-STD-202 Method 108A IEC 60115-1 4.25.1 At 70± 2°C for 1,000 hours; RCWV applied for 1.5 hours on and 0.5 hour off, still air required 0075: ± (5%+100mΩ) <100mΩ for jumper < 100mΩ f or jumper Others: ± (1%+50mΩ) for B/D/F tol ± (3%+50mΩ) for J tol <100mR for jumper High Temperature Exposure MIL-STD-202 Method 108A IEC 60068-2-2 1,000 hours at maximum operating temperature depending on specification, unpowered. 0075: ± (5%+100mΩ) <100mΩ for jumper < 50mΩf or jumper Others: ± (1%+50mΩ) for B/D/F tol ± (2%+50mΩ) for J tol <50mR for jumper Moisture Resistance MIL-STD-202 Method 106G Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts 0075: ± (2%+100mΩ) <100mΩ for jumper < 100mΩf or jumper Others: ± (0.5%+50mΩ) for B/ D/F tol ± (2%+50mΩ) for J tol <100mR for jumper Humidity IEC 60115-1 4.24.2 Steady state for 1000 hours at 40 °C / 95% R.H. RCWV applied for 1.5 hours on and 0.5 hour off 0075: ± (5%+100mΩ) no visible damage < 100mΩf or jumper Others: ± (1%+50mΩ) for B/D/F tol ± (2%+50mΩ) for J tol <100mR for jumper Table 8 T est condition, procedure and requirements
Chip Resistor Surface Mount www.yageo.com Feb. 17, 2017 V.5 Product specification SERIES RC_L 0075 to 2512 Thermal Shock MIL-STD-202 Method 107G -55/+125°C Note Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air - Air < 50mΩf or jumper Others: ± (0.5%+50mΩ) for B/D/F tol ± (1%+50mΩ) for J tol <50mR for jumper Short Time Overload IEC 60115-1 4.13 2.5 times RCWV or maximum overload voltage which is less for 5 seconds at room temperature < 50mΩf or jumper Others: ± (1%+50mΩ) for B/D/F tol ± (2%+50mΩ) for J tol <50mR for jumper No visible damage Board Flex/ Bending IEC 60115-1 4.33 Device mounted or as described only 1 board bending required bending time: 60± 5 seconds 0075/0100/0201/0402:5mm; 0603/0805:3mm; 1206 and above:2mm < 50mΩf or jumper Others: ± (1%+50mΩ) for B/D/F/J Tol <50mR for jumper No visible damage Solderability - Wetting J-STD-002 test B Electrical Test not required Magnification 50X SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245± 3 °C Dipping time: 3± 0.5 seconds W ell tinned (>95% covered) No visible damage -Leaching J-STD-002 test D Leadfree solder ,260°C, 30 seconds immersion time No visible damage -Resistance to Soldering Heat MIL-STD-202 Method 210F IEC 60115-1 4.18 Condition B, no pre-heat of samples Leadfree solder, 260 °C ± 5°C, 10 ± 1 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol 0075: ± (3%+50mΩ) <50mΩ for jumper < 50mΩf or jumper Others: ±(0.5% +50mΩ ) for B/D/F tol.±(1% +50mΩ ) for J tol. <50mR for jumper No visible damage
Chip Resistor Surface Mount www.yageo.com Feb. 17, 2017 V.5 Product specification SERIES RC_L 0075 to 2512 “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.”
REVISION HISTORY
TYPE POWER TOLERANCE RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE PF ± 1% ± 2% ± 5% 5 mΩ≦ R < 100 mΩ ±75 ppm/°C 0805 1/8W, 1/4W, 1/3W, 1/2W 4 mΩ ≦ R < 100 mΩ 1206 1/4W, 1/2W 3 mΩ ≦ R < 100 mΩ 2010 1/2W, 1W The resistors are constructed using outstanding TCR level material, which makes Yageo PF resistors excellent for current sensing application in battery charger circuit & DC-DC converter. The composition of the resistive material is adjusted to give the approximate required resistance and is covered with a protective coating, which printed with the resistance value. Finally, the three external terminations (Ni / matte Tin) are added, as shown in Fig. 4. 5 mΩ ≦ R < 100 mΩ 2512 1W, 2W 1 mΩ ≦ R < 100 mΩ 3W 1 mΩ ≦ R ≦ 50 mΩ 4527 2W, 3W, 5W 6 mΩ ≦ R < 1Ω NOTE: 1. PLEASE CONTACT WITH SALES OFFICES, DISTRIBUTORS AND REPRESENTATIVES IN YOUR REGION BEFORE ORDERING REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 6 Feb.15, 2017 - - Extend RC0805 and RC1206 resistance range to 100Mohm Version 5 Oct. 06, 2016 - - Description: Update Dimension of I2 of RC2512 (2W) Version 4 Jan. 22, 2016 - - Update resistance range Version 3 Dec. 24, 2015 - - Updated test and requirements Version 2 Jul. 23, 2015 - - Updated test and requirements Version 1 Jan. 21, 2015 - - ESD Safe Reel update Version 0 Dec. 15, 2014 - - First issue of this specification