RBD-50-L-00 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
RF one-step BNC/TNC connectors
Applications
RF one-step BNC/TNC connectors are single-piece assemblies for terminating the center conductor and the braid of a broad range of coaxial cables. The connectors are fully intermateable with MIL-C-39012 connectors and are available in 50-ohm and 75-ohm versions. Features and benefits /square6Easy, quick installation. /square6Outstanding cable-retention force. /square6Solder-solder connection type (center conductor and braid). /square6One-step termination for easy, quick installation and lower installed cost. /square6Exceptional cable retention force to withstand high vibration and frequent mates and demates. /square6Fully soldered center conductor and braid. /square6Excellent built-in strain relief against vibration and excessive handling. /square6Long-term reliability. /square6Controlled soldering termination. /square6Use with standard RG/U cables and Raychem Cheminax cables. /square6Three product sizes to accommodate a wide range of cables. /square6Meets performance requirements of MIL-C-39012 up to 2.8 GHz. Specifications Installation Raychem For proper installation of these devices, Refer to Raychem installation procedure RB-115 the correct heating tool and reflector RPIP 683-00 for detailed instructions. attachment must be used. Any one of the following Raychem heating tools is recommended:
- Steinel Model HL1802E
- CV-1981 Available in: Americas Europe Asia Pacific /square6/square6/square6 8-Electric. Interc. Products 30/9/02 11:09 am Page 60
US only (800) 260-9099 Outside US (650) 257-2301 Visit our website at www.tycoelectronics.com Users should independently evaluate the suitability of the product for their application. Before ordering check with factory for most current data. 8-61 Electrical Interconnect Products Product options and part numbering system (mm/in) Connector style Dash No. Style Connector type RXX - XX - X - XX -XX TNC BNC -00 Straight plug -01 Right angle plug -02 Straight bulkhead jack -03 Straight jack -04 Straight panel jack Connector size L = Large M = Medium S = Small 50 = 50 ohms 75 = 75 ohms D = Nickel-plated brass body, gold-plated brass pin B = BNC T = TNC Example: RBD-50-L-00 is a BNC connector, 50 ohms, large size, with straight plug body. 24.5 max.2;’ (.965) 24.5 max.2;’ (.965) 25.4 max.2;’ (1.0) 25.4 max.2;’ (1.0) 25.4 max.2;’ (1.0) 25.4 max.2;’ (1.0) 4 x M2.5 x 0.45 25.4 max.2;’ (1.0) 4 x M2.5 x 0.45 25.4 max.2;’ (1.0) 31.5 max.2;’ (1.23) 28 (1.09) hCR33.5 max.2;’ (1.32) 28 (1.09) Female Male 8-Electric. Interc. Products 30/9/02 11:09 am Page 61
RF one-step BNC/TNC connectors (cont’d.) Part selection process 1. From Product Options and Dimensions on page 8-61, select the connector style you need (BNC or TNC, plug or jack, male or female contacts). 2. From the tables that follow, find the appropriate table for the connector style you selected. 3. From the appropriate table, select the connector part number based on the RG cable type or Raychem cable part number. For cable types not shown use the cable dimensions. Note: The cable dimensions in each table are keyed to the diagram below. Product characteristics Material Center contact Gold-plated beryllium copper (female) Gold-plated brass (male) Dielectric insulator PTFE Transition Silver-plated brass Connector body Nickel-plated brass Solder and flux Sn63Pb37, RMA flux Braided shield Tin-plated copper wire per ASTM B3 Insulation sleeve Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride, transparent blue Strain relief/sealing sleeve Radiation-crosslinked, heat-shrinkable modified polyolefin with adhesive, black Typical performance Dielectric withstand voltage 1500 V Insulation resistance 5000 megohms Temperature rating -55C to 150C Contact resistance-straight Inner = 1.5 milliohms, outer = 1.0 milliohm Contact resistance-right angle Inner = 2.5 milliohms, outer = 1.5 milliohms Cable retention force 295N (66 lb) to 822N (196 lb) Voltage rating 500 V RMS Connector durability 500 mating cycles minimum Electrical performance Nominal impedance 50 and 75 ohms Frequency range Up to 2.8 GHz Solder Transition Center2;’ contact Dielectric2;’ insulator Connector2;’ body Insulation sleeve2;’ and solderShield Insulation 2;’ sleeve D E F G 8-Electric. Interc. Products 30/9/02 11:09 am Page 62
US only (800) 260-9099 Outside US (650) 257-2301 Visit our website at www.tycoelectronics.com Users should independently evaluate the suitability of the product for their application. Before ordering check with factory for most current data. 8-63 Electrical Interconnect Products Part number selection - BNC coaxial connectors Cable type Cable dimensions in millimeters (inches) Impedance D E F G BNC straight plugs, male contacts BNC right-angle plugs, male contacts 8-Electric. Interc. Products 30/9/02 11:09 am Page 63
RF one-step BNC/TNC connectors (cont’d.) Part number selection - BNC coaxial connectors Cable type Cable dimensions in millimeters (inches) Impedance D E F G BNC straight bulkhead jacks, female contacts BNC straight jacks, female contacts 8-Electric. Interc. Products 30/9/02 11:09 am Page 64
US only (800) 260-9099 Outside US (650) 257-2301 Visit our website at www.tycoelectronics.com Users should independently evaluate the suitability of the product for their application. Before ordering check with factory for most current data. 8-65 Electrical Interconnect Products Part number selection - BNC coaxial connectors (continued) Cable type Cable dimensions in millimeters (inches) Impedance D E F G BNC straight panel jacks, female contacts Part number selection - TNC coaxial connectors Cable type Cable dimensions in millimeters (inches) Impedance D E F G TNC straight plugs, male contacts 8-Electric. Interc. Products 30/9/02 11:09 am Page 65
RF one-step BNC/TNC connectors (cont’d.) Part number selection - TNC coaxial connectors (continued) Cable type Cable dimensions in millimeters (inches) Impedance D E F G TNC right-angle plugs, male contacts TNC straight bulkhead jacks, female contacts 8-Electric. Interc. Products 30/9/02 11:09 am Page 66
US only (800) 260-9099 Outside US (650) 257-2301 Visit our website at www.tycoelectronics.com Users should independently evaluate the suitability of the product for their application. Before ordering check with factory for most current data. 8-67 Electrical Interconnect Products Part number selection - TNC coaxial connectors Cable type Cable dimensions in millimeters (inches) Impedance D E F G TNC straight jacks, Female contacts TNC straight panel jacks, female contacts Hole pattern for panel-mounted products (mm/in) 12.7 (.5) RBD-XX-X-04 RTD-XX-X-04 Panel thickness: 3.2 (.125) max. RBD-XX-X -02 RTD-XX-X -02 20.5 (.8) min. ∅ 12.9 (.51) 12 (.47) 18 (.7) min. ∅ 11.2 (.44) ∅ 3 (.12) 12.7 (.5) 8-Electric. Interc. Products 30/9/02 11:09 am Page 67