RB201A60T-31 ROHM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Rev.C 1/3 Schottky barrier diode RB201A60 zApplications z Dimensions (Unit : mm) General rectification zFeatures 1) Cylindrical mold type.(MSR) 2) Low V 3) High ESD. zConstruction z Taping specifications (Unit : mm) Silicon epitaxial planar zAbsolute maximum ratings (Ta=25°C) zElectrical characteristics (Ta=25°C) T-31 52.4±1.5 Ｂ 5.0±0.5 Ｃ0 . 5 Ｍ Ａ Ｘ Ｅ 50.4±0.4 Ｆ0 . 3 Ｍ Ａ Ｘ H1 6.0±0.5 H2 5.0±0.5 L1-L2 0.6ＭＡＸ ＊H1(6mm)：BROWN 注) 累積ピッチの許容差は20ピッチで±1.5mm以下とする 記号 寸法規格値(mm) Ａ T-32 26.0+0.4 AH2 H2 E B C L2L1 F DH1H1 IVORY BLUE Mark Standard dimension value (mm) cf : cumulativ e pitch tolerance with 20 pitch than ±1.5mm Symbol Min. Typ. Max. Unit VF -- 0 . 5 8 V IF=2.0A Reverse current IR -- 1 0 0 µ A VR=60V ConditionsParameter Forward voltage 29±1 29±1 3.0±0.2 φ0.6±0.1 φ2.5±0.2 CATHODE BAND ROHM : MSR ① Manufacture Date② ① 6② (BLUE) Symbol Unit VRM V VR V Io A Forward current surge peak （60Hz・1cyc） IFSM A Tj ℃ Tstg ℃ 150Junction temperature (*1) Mounted on epoxy board. 180°Half sine wave Storage temperature -55 to +150 Parameter Reverse voltage (DC) Reverse voltage (repetitive peak) Limits Average rectified forward current (*1) 2

Rev.C 2/3 zElectrical characteristic curves (Ta=25°C) FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS FORWARD CURRENT:IF(mA) REVERSE CURRENT:IR(uA) REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS CAPACITANCE BETWEEN TERMINALS:Ct(pF) REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS VF DISPERSION MAP FORWARD VOLTAGE:VF(mV) REVERSE CURRENT:IR(uA) IR DISPERSION MAP CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ct DISPERSION MAP IFSM DISPERSION MAP PEAK SURGE FORWARD CURRENT:IFSM(A) PEAK SURGE FORWARD CURRENT:IFSM(A) NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS PEAK SURGE FORWARD CURRENT:IFSM(A) TIME:t(ms) IFSM-t CHARACTERISTICS TIME:t(s) Rth-t CHARACTERISTICS TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) FORWARD POWER DISSIPATION:Pf(W) AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS trr DISPERSION MAP RESERVE RECOVERY TIME:trr(ns) 0.1 100 1000 10000 0 100 200 300 400 500 600 Ta=-25℃ Ta=125℃ Ta=75℃ Ta=25℃Ta=150℃ 0.01 0.1 100 1000 10000 100000 0 5 10 15 20 25 30 Ta=125℃ Ta=75℃ Ta=25℃ Ta=-25℃ Ta=150℃ f=1MHz 200 220 240 260 280 300 320 340 360 380 400 AVE:316.3pF Ta=25℃ f=1MHz VR=0V n=30pcs 100 Ta=25℃ VR=60V n=30pcs AVE:7.24uA 510 520 530 540 550 560 AVE:541.7mV Ta=25℃ IF=2A n=30pcs 100 150 200 250 300 AVE:66.0A 8.3ms Ifsm 1cyc 100 150 11 0 1 0 0 t Ifsm 012345 Sin(θ＝180) DCD=1/2 AVE:9.5ns Ta=25℃ IF=0.5A IR=1A Irr=0.25*IR n=10pcs 100 11 0 1 0 0 8.3ms Ifsm 1cyc 8.3ms 100 1000 0 5 10 15 20 25 30 f=1MHz 100 1000 10000 0.001 0.01 0.1 1 10 100 1000 Rth(j-a) Rth(j-c) Rth(j-l) time(ms) IF=0.5A td=300us IM=1mA Mounted on epoxy board

Rev.C 3/3 REVERSE POWER DISSIPATION:PR (W) REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) CASE TEMPARATURE:Tc(℃) Derating Curve(Io-Tc) 0 25 50 75 100 125 150 Sin(θ＝180) DC D=1/2 0 25 50 75 100 125 150 Sin(θ＝180) DC D=1/2T Tj=150℃ D=t/Tt VR Io VR=30V T Tj=150℃ D=t/Tt VR Io VR=30V C=200pF R=0Ω C=100pF R=1.5kΩ No break at 30kV AVE:5.50kV ELECTROSTATIC DISCHARGE TEST ESD(KV) ESD DISPERSION MAP 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 1 02 03 04 05 06 0 Sin(θ＝180) DC D=1/2

No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. Appendix1-Rev2.0 Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co.jpwww.rohm.com Copyright © 2008 ROHM CO.,LTD. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog.

21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121

FAX : +81-75-315-0172 Appendix