RA30 TOCOS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

/H1854630mm diameter, single-turn industrial panel controls /H18546Wirewound element /H18546Linear or audio tapers /H18546Single, tandem and triple units, single shaft; dual unit, dual shaft /H18546SPST or SPDT switch with 1A or 3A rating /H18546Shaft lock and center tap models /H18546Metal shaft and bushing /H18546T emperature range of /H1153710/H11543C or/H1153730/H11543C, up to/H11536100/H11543C /H18546Panel mount only /H185466mm diameter shafts in slot, flat or round end styles /H18546Standard 15mm or 20mm shaft length RA30YME RA30YD RA30Y

TOCOSAMERICA,INC. 1177 East Tower Road, Schaumburg, IL 60173 Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales @tocos.com www.tocos.com Unit: mm DimensionsRA30 Series RA30Y & RA30X Panel Mount, Single Unit, Single Shaft Right Angle Ear-Lug Terminals RA30YME, RA30YMF, RA30YSE, RA30YSF RA30XME, RA30XMF, RA30XSE, RA30XSF Panel Mount, Single Unit with Switch, Single Shaft Right Angle Ear-Lug Terminals, Rear Exit Lug Terminals for 1A or 3A SPST or SPDT Switch RA30YL & RA30XL Panel Mount, Single Unit, Single Shaft with Shaft Lock Right Angle Ear-Lug Terminals Recommended Panel Mounting Holes Recommended Panel Mounting Holes Recommended Panel Mounting Holes

TOCOSAMERICA,INC. 1177 East Tower Road, Schaumburg, IL 60173 Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales @tocos.com www.tocos.com Unit: mm DimensionsRA30 Series RAT30Y Panel Mount, Single Unit with Center Tap, Single Shaft Right Angle Ear-Lug Terminals, Tap Lug Terminal 105/H11543from Terminal #1 RA30YGL Panel Mount, Ganged Tandem Unit, Single Shaft with Shaft Lock Right Angle Ear-Lug Terminals on Each Unit RA30YG Panel Mount, Ganged Tandem Unit, Single Shaft Right Angle Ear-Lug Terminals on Each Unit Recommended Panel Mounting Holes Recommended Panel Mounting Holes Recommended Panel Mounting Holes

TOCOSAMERICA,INC. 1177 East Tower Road, Schaumburg, IL 60173 Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales @tocos.com www.tocos.com Unit: mm DimensionsRA30 Series RAT30YG Panel Mount, Ganged Tandem Unit with Center Tap, Single Shaft Right Angle Ear-Lug Terminals, Tap Lug Terminal 105/H11543from Terminal #1 RA30YD Panel Mount, Dual Unit, Dual Concentric Shaft Right Angle Ear-Lug Terminals on Each Unit RA30YT Panel Mount, Triple Unit, Single Shaft Right Angle Ear-Lug Terminals on Each Unit Recommended Panel Mounting Holes Recommended Panel Mounting Holes Recommended Panel Mounting Holes

TOCOSAMERICA,INC. 1177 East Tower Road, Schaumburg, IL 60173 Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales @tocos.com www.tocos.com Refer to Shaft End Styles Specifications and Hardware Specifications for details and availability. For additional information, refer to Guidelines and Precautions for Using Panel Controls. Resistance ( Ω) Resistance ( Ω) 100 200 500 Resistance ( Ω) 1,000 2,000 5,000 Resistance ( Ω) 10,000 20,000 Code 5R0 100 200 500 Code 101 201 501 Code 102 202 502 Code 103 203 Standard Nominal Total Resistance Values and Part Numbering Codes Standard Resistance Values and Part Numbering Codes Part Numbering SystemRA30 Series RA Y 30 102 KT L ME S B20 Resistance Tolerance: K = /H1155510% (standard). J = /H115555%; G = /H115552%; or F = /H115551% (special order). Resistance Code: Expressed in ohms. A three digit code where the first two digits are significant figures, and the third digit indicates the number of zeros that follow these figures. R indicates decimal point for resistance less than 10Ω (i.e., 5R0 = 5Ω;100 = 10Ω;1 0 1=1 00Ω;102 = 1,000Ω; 103 = 10,000Ω). See table for standard resistance values. For Single Unit: Specify taper and resistance code as shown. For Ganged Tandem Unit or Dual Unit: Specify a taper code and resistance code for each unit starting with the front unit followed by the rear unit. If both units have the same taper and resistance codes, add “X2” suffix per example below. Examples: B102A503 or if both units are the same: B102X2 For Triple Unit: Specify a taper code and resistance code for each unit starting with the front unit followed by the middle and rear units. If all units have the same taper and resistance codes, add “X3” suffix per example below. Examples: B102A503B104 or if all units are the same: B102X3 Resistance Taper: B = Linear; A = CW Audio (logarithm); C = CCW Audio (logarithm). Shaft End Style: S = Slotted; F = Flatted; R = Round. For Single Shaft: Specify the shaft length (FMS) and shaft end style as shown. For Dual Concentric Shaft: Specify the shaft length (FMS) and shaft end style for the inner shaft followed by the shaft length (FMS) and shaft end style for the outer shaft. Use a dash (-) to separate the code groups for the inner and outer shaft specifications. Example: 30R-20R Standard Shaft Length: 15 = 15mm FMS; 20 = 20mm FMS. Up to 50mm shaft length available (special order). Switch Type: ME = SPDT, 110VAC, 1A, Rear Exit Lug T erminals. MF = SPDT, 110VAC, 3A, Rear Exit Lug T erminals. SE = SPST, 110VAC, 1A, Rear Exit Lug T erminals. SF = SPST, 110VAC, 3A, Rear Exit Lug T erminals. Blank = No Switch. Style: Blank = Panel Mount, Single Unit, Single Shaft, Right Angle Ear-Lug T erminals. L = Panel Mount, Single Unit, Single Shaft with Shaft Lock, Right Angle Ear-Lug T erminals. G = Panel Mount, Ganged Tandem Unit, Single Shaft, Right Angle Ear-Lug T erminals on Each Unit. GL = Panel Mount, Ganged Tandem Unit, Single Shaft with Shaft Lock, Right Angle Ear-Lug T erminals on Each Unit. T = Panel Mount, Triple Unit, Single Shaft, Right Angle Ear-Lug T erminals on Each Unit. D = Panel Mount, Dual Unit, Dual Concentric Shaft, Right Angle Ear-Lug T erminals on Each Unit. Operating Temperature Range: Y = /H1153710/H11543C to/H11536100/H11543C. X = /H1153730/H11543C to/H11536100/H11543C. Size: 30 = 30mm Diameter. Center Tap: T = With Tap; Blank = Without Tap. TOCOS Series Name: RA = Wirewound Element. NOTE: FMS = From Mounting Surface