RAM-3 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 1 of 4 Product Features

  • Wideband, DC to 2 GHz
  • Cascadable ceramic package
  • Internally Matched to 50 Ohms
  • Low noise figure, 6.0 dB typ.
  • Excellent repeatability
  • Aqueous washable
  • Protected under US Patent 6,943,629 Typical Applications
  • Cellular
  • UHF/VHF
  • Communication system
  • Transmition receivers simplified schematic and pin description Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”. GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. General Description RAM-3+ (RoHS compliant) is a wideband amplifier offering high dynamic range. It has repeatable per- formance from lot to lot. It is enclosed in a ceramic surface-mount package. RAM-3+ uses Darlington configuration and is fabricated using InGaP HBT technology. Expected MTBF is 900 years at 100°C case temperature. RAM-3+ GROUND RF IN RF-OUT and DC-IN REV. B M120653 RAM-3+ 150320 DC-2 GHz CASE STYLE: AF190 PRICE: $4.60 ea. QTY . (20) +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications GND GND R F-OUT and DC-IN RF IN 2 4

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Electrical Specifications at 25°C and 35mA, unless noted RAM-3+ Absolute Maximum Ratings Parameter Ratings Operating Temperature -54°C to 100°C Storage Temperature -65°C to 150°C Operating Current 80mA Power Dissipation 425mW Input Power 13dBm Note: Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 1Case is defined as ground leads. 2Full temperature range. Parameter Min. Typ. Max. Units Frequency Range* DC 2 GHz Gain f=0.1 GHz — 12.5 dB f=1 GHz — 12 f=2 GHz 8.02 10.5 Input Return Loss f=DC to 2 GHz 12.5 dB Output Return Loss f=DC to 2 GHz 11.5 dB Output Power @ 1 dB compression f=1 GHz +10 dBm Output IP3 f=1 GHz +23 dBm Noise Figure f=1 GHz 6.0 dB Recommended Device Operating Current 35 mA Device Operating Voltage 5.0 V Device Voltage Variation vs. Temperature at 35 mA -2.6 mV/°C Device Voltage Variation vs. Current at 25°C 15.5 mV/mA Thermal Resistance, junction-to-case1 150 °C/W *Guaranteed specification DC-2 GHz. Low frequency cut off determined by external coupling capacitors.

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Product Marking RAM-3+ Case Style: AF190 Suggested Layout for PCB Design: PL-254 Ceramic surface-mount, .083 body diameter, lead finish: tin-silver over nickel Evaluation Board: TB-414-3+ Tape & Reel: F14 7” inch reels with 20, 50, 100, 200, 500, 1000 devices. Additional Detailed Technical Information Additional information is available on our web site. To access this information enter the model number on our web site home page. Environmental Ratings: ENV08T6 Performance data, graphs, s-parameter data set (.zip file) A03 R BIAS Vcc “1%” Res. Values (ohms) for Optimum Biasing 7 57.6 8 86.6 9 115 10 143 11 169 12 200 13 226 14 255 15 287 Recommended Application Circuit Test Board includes case, connectors, and components (in bold) soldered to PCB C block IN C block Ibias OUT V d R F C (Optional) C bypas s V cc R bias (R equired) Markings in addition to model number designation may appear for internal quality control purposes. 2 4

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits RAM-3+ Human Body Model (HBM): Class 1B (500 v to < 1000 v) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 ( <100 v) in accordance with ANSI/ESD STM 5.2 - 1999 ESD Rating