RAL LORLIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
RAL LOCK SWITCH WITH A ROTARY SWITCH MODULE ELECTRICAL & MECHANICAL SPECIFICATION
FEATURES
Non-shorting BBM (break before make) or Shorting MBB (make before break) 60° or 90° switch indexing 5-disc lock Single or Multi wafer Up to 5 poles per switch Solder or PCB terminals Silver contacts Gold flashed or gold plated also available 2 keys per switch as standard Key inserted/removeable 60° or 90° Common or differ keys 200 combinations Master key system available Two stage assembly: lock inserted from the inside and the lock bezel screws on from the front to secure the assembly Max panel thickness 8.5mm SINGLE WAFER RAL LOCKSWITCH Switch Rating: 500mA @ 24V ac/dc (Resistive load only) Proof Voltage: 1,000V ac (Initial) Insulation Resistance: >999 MΩ at 500V dc (Initial) Contact Resistance <20 mΩ (Initial) Contact/Terminal Material: Brass CZ108 Ag Plated Life: >10,000 Cycles Operating Temperature: -30°C to +85°C Operating Torque (nominal): 7.2Nm End Stop Torque (nominal): 1.2Nm Lock Housing Material: Zinc Alloy Bright Cr Plated Keys Material: Mild Steel Ni Plated Wafer Material: Polyphenylene Sulphide (PPS) PANEL PIERCING LOCK MOVEMENT DESC.
STANDARD CIRCUITRY AND KEY WITHDRAWAL POSITIONS
TYPICAL WAFER LAYOUTS 30°,45°,60° AND 90° WAFERS ABOVE ARE VIEWED FROM THE FRONT OF THE SWITCH IN THE FURTHEST COUNTER CLOCKWISE POSITION. CIRCUITY IS SHOWN AS BREAK BEFORE MAKE (BBM) NON-SHORTING. MAKE BEFORE BREAK (MBB) OPTIONS ARE ALSO AVAILABLE FRONT REAR VIEWED FROM FRONT FRONT REAR VIEWED FROM FRONT FRONT REAR VIEWED FROM FRONT FRONT REAR VIEWED FROM FRONT