RAL-12W-K

RAL-D12W-K FUJITSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

l Ultra high sensitivity (75 to 150 mW) l High reliability-bifurcated contacts l Conforms to FCC rules and regulations Part 68 —Dielectric strength 1,500 VAC between coil and contacts —Surge strength 1,500 V l UL, CSA recognized l Wide operating range l DIL pitch terminals l Plastic sealed type l Latching type available l Dial-pulse relay available l RoHS compliant since date code: 0418H Please see page 7 for more information (a) Series Name RA : RA Series (b) Operation Function Nil : Standard type L : Latching type (c) Number of Coil Nil : Single winding type D : Double winding type (d) Nominal Voltage Refer to the COIL DATA CHART (e) Contact W : Bifurcated type (f) Enclosure K : Plastic sealed type Note: Actual marking omits the hyphen (-) of (*) For movable and stationary contact with gold overlay type, add suffix ““-OH””. n ORDERING INFORMATION RA L – D 12 W – K [Example] (a) (b) (*) (c) (d) (e) (f) RA SERIES MINIATURE RELAY

2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)

Nominal Coil resistance Set Reset Nominal MODEL voltage (±10%) voltage*1 voltage*1 power RAL-1.5 W-K 1.5 VDC 30Ω +1.0 VDC –1.0 VDC 75 mW RAL- 3 W-K 3 VDC 120Ω +2.1 VDC –2.1 VDC 75 mW RAL-4.5 W-K 4.5 VDC 270Ω +3.1 VDC –3.1 VDC 75 mW RAL- 5 W-K 5 VDC 335Ω +3.4 VDC –3.4 VDC 75 mW RAL- 6 W-K 6 VDC 480Ω +4.1 VDC –4.1 VDC 75 mW RAL- 9 W-K 9 VDC 1,080Ω +6.3 VDC –6.3 VDC 75 mW RAL- 12 W-K 12 VDC 1,920Ω +8.3 VDC –8.3 VDC 75 mW RAL- 18 W-K 18 VDC 4,320Ω +12.5 VDC –12.5 VDC 75 mW RAL- 24 W-K 24 VDC 5,760Ω +16.6 VDC –16.6 VDC 100 mW RAL -48 W-K 48 VDC 11,520Ω +21.0 VDC –21.0 VDC 200 mW RAL-D1.5 W-K 1.5 VDC P 15Ω +1.0 VDC 150 mW S 15Ω +1.0 VDC RAL-D 3 W-K 3 VDC P 60Ω +2.0 VDC 150 mW S 60Ω +2.0 VDC RAL-D4.5 W-K 4.5 VDC P 135Ω +3.1 VDC 150 mW S 135Ω +3.1 VDC RAL-D 5 W-K 5 VDC P 167Ω +3.4 VDC 150 mW S 167Ω +3.4 VDC RAL-D 6 W-K 6 VDC P 240Ω +4.0 VDC 150 mW S 240Ω +4.0 VDC RAL-D 9 W-K 9 VDC P 540Ω +6.1 VDC 150 mW S 540Ω +6.1 VDC RAL-D 12 W-K 12 VDC P 960Ω +8.1 VDC 150 mW S 960Ω +8.1 VDC RAL-D 18 W-K 18 VDC P 2,160Ω +12.3 VDC 150 mW S 2,160Ω +12.3 VDC RAL-D 24 W-K 24 VDC P 2,880Ω +16.1 VDC 200 mW S 2,880Ω +16.1 VDC RAL-D 48 W-K 48 VDC P 11,520Ω +32.2 VDC 200 mW S 11,520Ω +32.2 VDC Nominal Coil resistance Must operate Must release Nominal MODEL voltage (±10%) voltage*1 voltage*1 power RA-1.5 W-K 1.5 VDC 15Ω +1.0 VDC +0.15 VDC 150 mW RA- 3 W-K 3 VDC 60Ω +2.0 VDC +0.3 VDC 150 mW RA-4.5 W-K 4.5 VDC 135Ω +3.1 VDC +0.45 VDC 150 mW RA- 5 W-K 5 VDC 167Ω +3.4 VDC +0.5 VDC 150 mW RA- 6 W-K 6 VDC 240Ω +4.0 VDC +0.6 VDC 150 mW RA- 9 W-K 9 VDC 540Ω +6.1 VDC +0.9 VDC 150 mW RA- 12 W-K 12 VDC 960Ω +8.1 VDC +1.2 VDC 150 mW RA- 18 W-K 18 VDC 2,160Ω +12.3 VDC +1.8 VDC 150 mW RA- 24 W-K 24 VDC 2,880Ω +16.1 VDC +2.4 VDC 200 mW RA- 48 W-K 48 VDC 11,520Ω +32.2 VDC +4.8 VDC 200 mW n COIL DATA CHARTStandard Type Note: *1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. Single Winding Latching TypeDouble Winding Latching Type P: Primary coil S: Secondary coil Note: * 1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C.

Standard Type Single Winding Latching Type Double Winding Latching Type Item RA-( ) W-K RAL-( ) W-K RAL-D ( ) W-K Contact Arrangement 2 form C (DPDT) Material Gold overlay palladium Style Bifurcated (cross bar) Resistance (initial) Maximum 100 mΩ (at 1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 24 VDC Maximum Carrying Current 2 A Maximum Switching Power 60 VA, 24 W Maximum Switching Voltage 250 VAC, 220 VDC Maximum Switching Current 2 A Minimum Switching Load*1 0.01 mA 10 mVDC Capacitance Approximately 1.5 pF (between open contacts), 1.0 pF (adjacent contacts) (10 MHz) Approximately 1.7 pF (between coil and contacts) Coil Nominal Power (at 20°C) 150 to 200 mW 75 to 200 mW 150 to 200 mW Operate Power (at 20°C) 70 to 90 mW 40 to 50 mW 70 to 90 mW Operating Temperature –40°C to +80°C (no frost) (refer to the CHARACTERISTIC DATA) Time Value Operate (at nominal voltage) Maximum 6 ms Maximum 6 ms (set) Release (at nominal voltage) Maximum 4 ms Maximum 6 ms (reset) Life Mechanical 2 × 107 operations minimum Other Vibration Misoperation 10 to 55 Hz (double amplitude of 5.0 mm) Resistance Endurance 10 to 55 Hz (double amplitude of 5.0 mm) Shock Misoperation 500 m/s2 (11 ±1 ms) Resistance Endurance 1,000 m/s2 ( 6 ±1 ms) Weight Approximately 3.7 g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. Item Standard Single latch Double latch Isolation (initial) Minimum 1,000 MΩ (at 500VDC) Dielectric Strength open contacts 1,000VAC 1 min., coil and contacts/ adjacent contact 1,500VAC 1 min., Surge Voltage 1500V (coil-contact) (10/160 µs standard wave) n INSULATION Type Compliance Contact rating UL UL 478, UL 508 E 45026 Flammability: UL 94-V0 (plastics) 0.5A, 120VAC (resistive) 2A, 30VDC (resistive) 0.5A, 60VDC (resistive) CSA C22.2 No. 14 LR 35579 n SAFETY STANDARDS

(Bottom View) l PC board mounting hole layout (Bottom View)RA, RAL type (Non-latching type, single winding latching type) RAL-D type (Double winding latching type) Unit: mm

1. General Information l Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHSon October 21, 2005. (Amendment to Directive 2002/95/EC) 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. RoHS Compliance and Lead Free Relay Information Reflow Solder condition 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. We highly recommend that you confirm your actual solder conditions Flow Solder condition: Pre-heating: maximum 120˚C Soldering: dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec.

3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25

2132 WV Hoofddorp

Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ Fujitsu Components International Headquarter Offices ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 30, 2009.