RADARLEVELTRANSMITTER NOSHOK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Industrial Pressure Transmitters & Transducers LTI20LTI20 SERIES
APPLICATIONS
■ General Industrial ■ Mobile Equipment ■ Agriculture Equipment ■ Water Treatment ■ Pumping Stations ■ Injection Molding Media SPECIFICATIONS Output signals 4 mA to 20 mA, 3-wire
0 Vdc to 5 Vdc, 3-wire
Media dielectric constant ≥ 2 Min measuring distance 4 in Max measuring distance 300 in [25 ft] (additional distances available, consult factory) Beam angle ±6° Measuring frequency > 1 Hz Settling time 1 s Per IEC 62828-1 Switch-on time <3 s Accuracy parameters ±0.2 inches Per IEC 62828-4 Non-repeatability ≤ 0.079 in Response time 4s Temperature ranges Media: Standard -40 °F to 212 °F (-40 °C to 100 °C) High Temp -40 °F to 302 °F (-40 °C to 150 °C) Ambient: -40 °F to 212 °F (-40 °C to 100 °C) Storage: -40 °F to 158 °F (-40 °C to 70 °C) Power requirement 8 Vdc to 36 Vdc Measuring element PEEK (Lens) FKM (O-Ring) Connection 316L Stainless Steel Housing material 316L Stainless Steel M12 electrical connection Nickle-plated Brass, Nylon Cable jacket material PVC (Others available upon request) Environmental rating IP67 Electromagnetic rating RFI, EMI and ESD protection Electrical protection Protected against reverse polarity, over-voltage and short circuit Shock 100g, 11 ms per IEC 60068-2-27 Vibration (Short duration) 40 g's, 10 to 2,000 Hz per IEC 60068-2-6 Vibration (Long term) 10 g's, 10 to 2,000 Hz per IEC 60068-2-6 Max. operating pressure 362 psi (25 bar) Weight Approximately 2.8 oz.
- Continuous level measurement in containers and tanks
- Suitable for liquid, highly viscous and solid media
- Compact design for easy integration
- Can be installed outside a container (plastic)
- Suitable for industrial applications and mobile working machines WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
ORDERING INFORMATION
SERIES LTII20 Radar level transmitter OUTPUT SIGNALS 36 4 mA to 20 mA, 3-wire 2 0 Vdc to 5 Vdc, 3-wire PROCESS CONNECTIONS 8 1/2" NPT 86 G1/2 (DIN 3852-2-A) ELECTRICAL CONNECTIONS 25 M12 x 1 (4-pin) 36 6' integral cable OPTIONS HT High Temp (302 °F [150 °C] Media Temp) Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information LTII20 – 36 – 8 – 25 EXAMPLE Calibration in Empty Tank: 1. Install the sensor and connect the output signal 2. Hold the provided magnet to the marked position "CAL" on the label 3. Output signal will change to 1 mA (0 Vdc) (Magnet has been detected by the device) 4. Continue to hold the magnet in the marked position (approx. 10 seconds) 5. Output signal will change to 2.5 mA (2.5 Vdc) (Remove magnet) 6. Calibration process will be complete after approximately 5 seconds LTI20-25 (M12 x 1 4-pin)LTI20-25-HT (M12 x 1 4-pin) ORDERING INFORMATION DIMENSIONS LTI20 SERIES
Industrial Pressure Transmitters & Transducers LTI20-36 (6' integral cable )LTI20-36-HT (6' integral cable ) LTI20 Process Connections DIMENSIONS