R8005ANX ROHM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R8005ANX Nch 800V 5A Power MOSFET 4) Drive circuits can be simple. 2) Fast switching speed. Tape width (mm) - 3) Gate-source voltage (VGSS) guaranteed to be 30V. Application Reel size (mm) 6) Pb-free lead plating ; RoHS compliant Bulk Type Packaging 500 Taping code 800V 2.08 51W 5) Parallel use is easy. VDSS RDS(on) (Max.) ID PD 1) Low on-resistance. Outline Inner circuit Packaging specifications TO-220FM VGSS 20 Continuous drain current Basic ordering unit (pcs) Pulsed drain current Gate - Source voltage Parameter Tc = 100°C Switching Power Supply Value Tc = 25°C Symbol Absolute maximum ratings(Ta = 25°C) Drain - Source voltage Marking R8005ANX Features Unit 800VDSS ID *1 A V V30 V/ns 150 Reverse diode dv/dt IAR Range of storage temperature Tstg Power dissipation (Tc = 25°C) W Junction temperature A dv/dt *5 15 55 to 150 ID,pulse ID *1 2.4 A A Tj °C mJEAR Avalanche energy, single pulse Avalanche energy, repetitive Avalanche current 2.5 E AS *3 1.3 mJ PD 51 1.66 (1) (3)(2) (1) Gate (2) Drain (3) Source 1 BODY DIODE (1) (2) (3) 1/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Drain - Source voltage slope dv/dt VDS = 640V, ID = 5A Typ. Symbol Conditions Values Absolute maximum ratings Thermal resistance Thermal resistance, junction - case Parameter Max. Parameter IGSS -n A Tj = 125°C V V 0.1 A 1000 100- Tj = 25°C Drain - Source avalanche breakdown voltage - 800 ConditionsSymbol V(BR)DS Min. Values Typ. 100 Zero gate voltage drain current V (BR)DSS VGS = 0V, ID = 2.5A VGS = 0V, ID = 1mA IDSS Unit Tsold RthJA Min. RthJC Symbol Unit °C/W Values V/ns Tj = 125°C 2.41- °C- 265 °C/W Unit Max. 900 -7 0 Gate threshold voltage VGS (th) VDS = 10V, ID = 1mA 3 Gate - Source leakage current VGS = 30V, VDS = 0V -V 5 Thermal resistance, junction - ambient Soldering temperature, wavesoldering for 10s Electrical characteristics(Ta = 25°C) Parameter Drain - Source breakdown voltage VDS = 800V, VGS = 0V Gate input resistance RG f = 1MHz, open drain - 7.7 - Static drain - source on - state resistance T j = 25°C - 1.60 2.08 Tj = 125°C - RDS(on) VGS = 10V, ID = 2.5A 3.69 - 2/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX *1 Limited only by maximum temperature allowed. *2 PW 10s, Duty cycle 1% *3 L ⋍ 500H, VDD = 50V, RG = 25, starting Tj = 25°C *4 L ⋍ 500H, VDD = 50V, RG = 25, starting Tj = 25°C, f = 10kHz *5 Reference measurement circuits Fig.5-1. *6 Pulsed 7.4 VGate plateau voltage V(plateau) VDD ⋍ 400V, ID = 5A -- Gate - Drain charge Qgd Parameter Gate Charge characteristics(Ta = 25°C) Rise time tr *6 ID = 2.5A Symbol Values VGS = 10V - 4.4 - Min. 21 - Conditions Total gate charge Gate - Source charge Q gs *6 ID = 5A Qg *6 VDD ⋍ 400V 11 - Typ. ns 37 74 41 82 Max. Unit nC R G = 10 - Turn - off delay time td(off) *6 RL = 160 - Fall time tf pF - 16.8 - - 41.2 Turn - on delay time td(on) *6 VDD ⋍ 400V, VGS = 10V - Effective output capacitance, energy related Effective output capacitance, time related Co(er) Co(tr) VGS = 0V VDS = 0V to 640V 485 - gfs *6 VDS = 10V, ID = 2.5A pF - Crss f = 1MHz - 21 - 250 Max. Reverse transfer capacitance Electrical characteristics(Ta = 25°C) Parameter Symbol Conditions Values Unit Min. Typ. 2Transconductance Input capacitance Output capacitance Coss VDS = 25V - Ciss VGS = 0V - 3/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Peak reverse recovery current Parameter Symbol Conditions Values Reverse recovery charge trr - 16.5 Qrr Irrm IS *1 ISM *2 Tc = 25°C Body diode electrical characteristics (Source-Drain)(Ta = 25°C) -4 . 6- C VSD *6 VGS = 0V, IS = 5A Typ. Forward voltage Reverse recovery time Unit Min. Max. Inverse diode continuous, forward current Inverse diode direct current, pulsed IS = 5A di/dt = 100A/s 554 0.00169 K/W Ws/KRth2 0.966 Cth2 0.0194
0.258 Cth1Rth1
Rth3 2.18 Cth3 0.461 Peak rate of fall of reverse recovery current dirr/dt Value Typical Transient Thermal Characteristics Symbol Value Unit Symbol A/s-Tj = 25°C Unit A A 1.5 V ns 4/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Electrical characteristic curves 0.0001 0.001 0.01 0.1 100 1000 0.0001 0.01 1 100 Ta = 25ºC Single Pulse Rth(ch-a)(t) = ｒ(t)×Rth(ch-a) Rth(ch-a) = 70ºC/W top D = 1 D = 0.5 D = 0.1 D = 0.05 D = 0.01 D = Single 100 120 0 50 100 150 200 0.001 0.01 0.1 100 0.1 1 10 100 1000 Ta=25ºC Single Pulse PW = 100s PW = 1ms PW = 10msOperation in this area is limited by RDS(on) (VGS = 10V) Fig.1 Power Dissipation Derating Curve Fig.2 Maximum Safe Operating Area Power Dissipation : PD/PD max. [%] Drain Current : ID [A] Junction Temperature : Tj [°C] Drain - Source Voltage : VDS [V] Fig.3 Normalized Transient Thermal Resistance vs. Pulse Width Normalized Transient Thermal Resistance : r(t) Pulse Width : PW [s] 5/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Electrical characteristic curves 0.5 1.5 2.5 3.5 0.01 0.1 1 10 100 Ta = 25ºC VDD = 50V, RG = 25 VGF = 10V, VGR = 0V 200 400 600 800 1000 1200 1400 1600 1800 2000 Ta=25ºC 100 120 0 25 50 75 100 125 150 175 Fig.4 Avalanche Current vs Inductive LoadAvalanche Current : IAR [A] Coil Inductance : L [mH] Fig.5 Avalanche Power Losses Avalanche Power Losses : PAR [W] Frequency : f [Hz] Fig.6 Avalanche Energy Derating Curve vs Junction Temperature Avalanche Energy : EAS / EAS max. [%] Junction Temperature : Tj [ºC] 6/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Electrical characteristic curves 0 1 02 03 04 05 0 Ta=150ºC Pulsed VGS= 10.0V VGS= 4.5V VGS= 8.0V VGS= 7.0V VGS= 6.5V VGS= 6.0V VGS= 5.0V VGS= 5.5V 0.2 0.4 0.6 0.8 012345 Ta=150ºC Pulsed VGS= 10.0V VGS= 4.5V VGS= 8.0V VGS= 7.0V VGS= 6.5V VGS= 6.0V VGS= 5.0V VGS= 5.5V 0.2 0.4 0.6 0.8 012345 Ta=25ºC Pulsed VGS= 10.0V VGS= 4.5V VGS= 8.0V VGS= 7.0V VGS= 6.5V VGS= 6.0V VGS= 5.0V Fig.7 Typical Output Characteristics(I) Fig.8 Typical Output Characteristics(II) Fig.9 Tj = 150°C Typical Output Characteristics(I) Fig.10 Tj = 150°C Typical Output Characteristics(II) Drain - Source Voltage : VDS [V] Drain - Source Voltage : VDS [V] Drain Current : ID [A] Drain Current : ID [A] Drain Current : ID [A] Drain - Source Voltage : VDS [V] Drain Current : ID [A] Drain - Source Voltage : VDS [V] 0 1 02 03 04 05 0 VGS= 10.0V VGS= 4.5V VGS= 8.0V VGS= 7.0V VGS= 6.5V VGS= 6.0V Ta=25ºC Pulsed 7/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Electrical characteristic curves 700 750 800 850 900 950 1000 1050 1100 -50 -25 0 25 50 75 100 125 150 - 5 0 - 2 50 2 55 07 5 1 0 0 1 2 5 1 5 0 VDS= 10V Plused 0.01 0.1 0.01 0.1 1 10 VDS= 10V Plused Ta= 25ºC Ta=25ºC Ta=75ºC Ta=125ºC Fig.12 Typical Transfer CharacteristicsFig.11 Breakdown Voltage vs. Junction Temperature Drain - Source Breakdown Voltage : V(BR)DSS [V] Drain Current : ID [A] Fig.13 Gate Threshold Voltage vs. Junction Temperature Gate Threshold Voltage : VGS(th) [V] Junction Temperature : Tj [°C] Fig.14 Transconductance vs. Drain Current Transconductance : gfs [S] Drain Current : ID [A] Junction Temperature : Tj [°C] Gate - Source Voltage : VGS [V] 0.001 0.01 0.1 VDS= 10V Plused Ta=125ºC Ta=75ºC Ta=25ºC Ta= 25ºC 8/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Electrical characteristic curves 0 2 4 6 8 10 12 14 16 18 20 ID = 2.5A ID = 5.0A Ta=25ºC Pulsed - 5 0 - 2 50 2 55 07 5 1 0 0 1 2 5 1 5 0 VGS= 10V Plused ID = 2.5A ID = 5.0A Fig.15 Static Drain - Source On - State Resistance vs. Gate Source Voltage Static Drain - Source On-State Resistance : RDS(on) [] Gate - Source Voltage : VGS [V] Fig.16 Static Drain - Source On - State Resistance vs. Junction Temperature Static Drain - Source On-State Resistance : RDS(on) [] Junction Temperature : Tj [ºC] Fig.17 Static Drain - Source On - State Resistance vs. Drain Current Static Drain - Source On-State Resistance : RDS(on) [] Drain Current : ID [A] 0.1 0.01 0.1 1 10 VGS= 10V Plused Ta=125ºC Ta=75ºC Ta=25ºC Ta= 25ºC 9/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Electrical characteristic curves 100 1000 10000 0.01 0.1 1 10 tr tf td(on) td(off) VDD ≒ 400V VGS = 10V RG= 10 Ta = 25ºC Pulsed 0 5 10 15 20 25 30 Ta = 25ºC VDD= 400V ID= 5A Pulsed Fig.18 Typical Capacitance vs. Drain - Source Voltage Capacitance : C [pF] Drain - Source Voltage : VDS [V] Fig.20 Switching CharacteristicsSwitching Time : t [ns] Drain Current : ID [A] Fig.21 Dynamic Input Characteristics Total Gate Charge : Qg [nC] Gate - Source Voltage : VGS [V] Coss Stored Energy : EOSS [uJ] Fig.19 Coss Stored Energy Drain - Source Voltage : VDS [V] 100 1000 10000 0.01 0.1 1 10 100 1000 Coss Crss Ciss Ta=25ºC f = 1MHz VGS = 0V 0 200 400 600 800 Ta=25ºC 10/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Electrical characteristic curves Fig.22 Inverse Diode Forward Current vs. Source - Drain Voltage Inverse Diode Forward Current : IS [A] Source - Drain Voltage : VSD [V] Fig.23 Reverse Recovery Time vs.Inverse Diode Forward Current Reverse Recovery Time : trr [ns] Inverse Diode Forward Current : IS [A] 0.01 0.1 0.0 0.5 1.0 1.5 VGS=0V Pulsed Ta=125ºC Ta=75ºC Ta=25ºC Ta= 25ºC 100 1000 0.1 1 10 Ta=25ºC VGS = 0V di / dt = 100A / s Pulsed 11/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Measurement circuits Fig.1-1 Switching Time Measurement Circuit Fig.1-2 Switching Waveforms Fig.2-1 Gate Charge Measurement Circuit Fig.2-2 Gate Charge Waveform Fig.3-1 Avalanche Measurement Circuit Fig.3-2 Avalanche Waveform Fig.4-1 dv/dt Measurement Circuit Fig.4-2 dv/dt Waveform Fig.5-1 di/dt Measurement Circuit Fig.5-2 di/dt Waveform VGS IG(Const.) VDS D.U.T. ID RL VDD 90% 90% 90% 10% 10% 50% 10% 50% VGS Pulse width VDS ton toff trtd(on) tftd(off) VGS RG VDS D.U.T. ID RL VDD VG VGS Charge Qg Qgs Qgd VGS RG VDS D.U.T. IAS L VDD IAS VDD V(BR)DSS IAS LEAS = V(BR)DSS - VDD V(BR)DSS1 VGS RG VDS D.U.T. IAS L VDD DRIVER MOSFET RG D.U.T. L IF VDD trr Irr 100% Irr IF Irr 90% drr / dt Irr 10% IAS VDD V(BR)DSS 12/13 2016.02 - Rev.B
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet R8005ANX Dimensions (Unit : mm) Dimension in mm / inches D E e b c F A2A1 AL x A φp Q ATO-220FM MIN MAX MIN MAX A 16.60 17.60 0.654 0.693 A1 1.80 2.20 0.071 0.087 A2 14.80 15.40 0.583 0.606 A4 6.80 7.20 0.268 0.283 b 0.70 0.85 0.028 0.033 b1 1.10 1.50 0.043 0.059 c 0.70 0.85 0.028 0.033 D 9.90 10.30 0.390 0.406 E 4.40 4.80 0.173 0.189 e E1 2.70 3.00 0.106 0.118 F 2.80 3.20 0.110 0.126 L 11.50 12.50 0.453 0.492 p 3.00 3.40 0.118 0.134 Q 2.10 3.10 0.083 0.122 x - 0.38 - 0.015 DIM MILIMETERS INCHES 2.54 0.100 13/13 2016.02 - Rev.B
Notice-PGA-E Rev.003 © 2015 ROHM Co., Ltd. All rights reserved. Notice Precaution on using ROHM Products 1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you intend to use our Products in devices requiring extremely high reliability ( such as medical equipment (Note 1), transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life , bodily injury or serious damage to property ( “Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅣ CLASSⅢ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsi bilities, adequate safety measures including but not limited to fail -safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below . Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions . If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent v erification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no -clean type fluxes, cleanin g residue of flux is recommended); or Washing our Products by using water or water -soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied, confirmation of pe rformance characteristics after on -board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady -state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation d epending on ambient temperature. When used in sealed area, confirm that it is the use in the range that does not exceed the maximum junction temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under devian t condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used on a surface -mount products, the flow soldering method must be used on a through hole mount products. If the flow soldering method is preferred on a surface -mount products , please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification
Notice-PGA-E Rev.003 © 2015 ROHM Co., Ltd. All rights reserved. Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use . Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and stor age so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e .g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign trade act, please consult with ROHM in case of export. Precaution Regarding Intellectual Property Rights 1. All information an d data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the Products with other articles such as components, circuits, systems or external equipment (including software). 3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatso ever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties.