R7L integrated circuit reference — Local datasheet available

R7L

M-System Co.,Ltd.

Remote I/O R7 Series LonWorks I/O MODULE

Manufacturer: M-System Co.,Ltd.

Document: 26 Pages / 608Kb

Request Quote Download Datasheet Read online HTML view

More from M-System Co.,Ltd. Browse R parts

Online Datasheet

Read R7L online.

R7L MSYSTEM | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 26

Technical content

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 1/26 http://www.m-system.co.jp/ Remote I/O R7 Series LonWorks I/O MODULE

ORDERING INFORMATION

Basic module: R7L-[1]-AR[2] Specify a code from below for each [1] and [2]. (e.g. R7L-DC16A-AR/Q)
Specify the specification for option code /Q (e.g. /C01)
Extension module: R7L-[1][2] Specify a code from below for each [1] and [2]. (e.g. R7L-EC16A/Q)
Specify the specification for option code /Q (e.g. /C01) MODEL: R7L-[1]-AR[2] [1] I/O TYPE DA16: Discrete input, 16 points DC16A: NPN transistor output, 16 points (One-shot pulse output is available.) DC16B: PNP transistor output, 16 points (One-shot pulse output is available.) DAC16: PNP discrete input, 8 points NPN transistor output, 8 points (One-shot pulse output is available.) SV4: DC voltage/current input (10 V/20 mA), 4 points TS4: Thermocouple input, 4 points RS4: RTD input, 4 points YV2: DC voltage output, 2 points YS2: DC current output, 2 points RR8: Remote control relay control output, 8 points R7L-DA16 and -DAC16 can accept totalized pulse input with no need of input extension module. Other modules need extension module. POWER INPUT Universal AR: 24 V AC/24 V DC (Operational voltage range: 24 V AC±10 %,50/60Hz/ 24 V DC±10 %, ripple 10 %p-p max.) [2] OPTIONS blank: none /Q: With options (specify the specification) EXTENSION MODULE: R7L–[1][2] [1] I/O TYPE EA8: Discrete input, 8 points EA16: Discrete input, 16 points EC8A: NPN transistor output, 8 points EC16A: NPN transistor output, 16 points EC8B: PNP transistor output, 8 points EC16B: PNP transistor output, 16 points [2] OPTIONS blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating FUNCTIONS & FEATURES The R7L interfaces analog and discrete I/O signals with a PC via LonWorks. A ‘basic’ module can be attached with an ‘extension’ module. By combining two modules, single station can handle mixed analog and discrete signals, 32-point discrete inputs, 32-point discrete outputs, 16-point discrete I/Os and other combinations of signals. Single module can handle multiple Functional Blocks, not only the discrete I/O, but also the pulse count input, one- shot output, scaling, alarm output, and so forth. Input sensor type (thermocouple, RTD) and range can be selected using the LNS Plug-in Software (model: R7LPLG).

24 V AC ±10 % (50 / 60 Hz)

24 V DC ±10 %; ripple 10 %p-p max. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @1 minute (between isolated circuits) Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Storage temperature: -20 to +65°C (-4 to +149°F) Mounting: DIN rail (35 mm wide) Connection: M3 separable screw terminals (torque 0.5 N·m) Screw terminal material: Nickel-plated steel Solderless terminal: Refer to the drawing at the end of the section. Recommended manufacturer: Japan Solderless Terminal MFG.Co.Ltd, Nichifu Co.,ltd Applicable wire size: 0.25 to 1.65 mm2 (AWG22 to 16) Housing material: Flame-resistant resin (gray) Status indicator: PWR, ONLINE, ERR, TX/RX, SVCE (Refer to the instruction manual for details) ■ Current Consumption & Weight Current consumption at 24 V AC / 24 V DC R7L-DA16: 70 mA / 40 mA; 200 g (7.1 oz) R7L-DC16A: 80 mA / 50 mA; 200 g (7.1 oz) R7L-DC16B: 80 mA / 50 mA; 200 g (7.1 oz) R7L-DAC16: 75 mA / 45 mA; 200 g (7.1 oz) R7L-SV4: 80 mA / 50 mA; 200 g (7.1 oz) R7L-TS4: 85 mA / 50 mA; 200 g (7.1 oz) R7L-RS4: 85 mA / 50 mA; 200 g (7.1 oz) R7L-YV2: 110 mA / 70 mA; 200 g (7.1 oz) R7L-YS2: 180 mA / 110 mA; 200 g (7.1 oz) R7L-RR8: 75 mA / 50 mA; 200 g (7.1 oz) R7L-EA8: 15 mA / 10 mA; 90 g (3.2 oz) R7L-EA16: 30 mA / 20 mA; 150 g (5.3 oz) R7L-EC8A: 15 mA / 10 mA; 90 g (3.2 oz) R7L-EC16A: 30 mA 20 mA; 150 g (5.3 oz) R7L-EC8B: 15 mA / 10 mA; 90 g (3.2 oz) R7L-EC16B: 30 mA / 20 mA; 150 g (5.3 oz) ■ Recommended solderless terminal 6 (.24) max 3.3 (.13) max mm (inch) ■ I/O Status Indicator

Discrete I/O Discrete I/O modules have LED indicators showing I/O signal status.
Analog I/O Analog I/O modules have LED indicators showing network variable status assigned to fbLED. (Refer to the instruction manual for details) ■ Service Switch Used to identify the node in LonWorks network configuration. ■ Reset Switch Used to reset the Neuron Chip. Press the switch behind the front cover to reset. Control functions are halted while completing resetting and restarting. Confirm no danger before conducting resetting. LonWorks COMMUNICATION Neuron Chip: FT3120 (NeuronID printed in numeric and bar code [peel-off code 39 format] under the specification marking on the product; two sticker labels attached) Transceiver: FT-X1 (equivalent to FTT10A) Transmission speed: 78 kbps Twisted-pair cable Distance, free topology: 500 meters Max. 64 nodes/channel

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 3/26 http://www.m-system.co.jp/ EXTERNAL VIEW ■ BASIC MODULE ERR SVCE ONLINE TX/RX PWR 0 1 2 3 4 5 6 7 8 9 A B C D E F 4 5 6 7 1 2 3 10 11 12 13 2 3 41 15 16 17 18 7 8 96 Reset SW Factory Configuration PortService SW Status Indicator LED Indicator LED LON WORKS, Power Supply Terminals I/O Terminals *1 *1. 10 screw terminals for analog output modules. ■ EXTENSION MODULE 0 1 2 3 4 5 6 7 Discrete I/O Status Indicator LED I/O Terminals 7 86 9 10 2 31 4 5

DISCRETE, 8 POINTS 0 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 2 3 41 15 16 17 18 7 8 96 Discrete I/O Status Indicator LED I/O Terminals
DISCRETE, 16 POINTS

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 4/26 http://www.m-system.co.jp/ CONNECTION DIAGRAMS NET1 NET2 U (+) NET1 NET2 FG V (– ) NO. ID FUNCTION, NOTES

1 NET1 L ON WORKS communication 1

2 NET2 L ON WORKS communication 2

3 FG FG

4 NET1 L ON WORKS communication 1

5 NET2 L ON WORKS communication 2

6 U (+) Power input

7 V (

–) Power input POWER SUPPLY, L ON WORKS TERMINAL ASSIGNMENT Note: LON WORKS wiring must be paired between NET1 terminals and/or NET2 terminals. ■ HOST PC CONNECTION HOST PC LON WORKS R7L LON WORKS R7L LON WORKS Terminator DATA CONVERSION ■ 0 – 100% DATA CONVERSION Analog input data is converted into digital representations of 0 – 100% proportional to each scaled range. The converted % values are expressed in signed 16 bits. Overrange input is possible from -15 to +115% of the nominal range. When the signal exceeds the limit, the data is /f_ixed at -15% or +115% respectively.

Input Range 0 – 5V DC Input Value Input % Converted Data, Decimal 0V 0% 0.00 5V 100% 100.00 ≥ 5.75V 115% 115.00 Analog output is converted in the reverse order of the input data. The output range 0 – 5V DC is expressed as 100.00 at 115.00 100.00 -0.75 -15.00 5.0 5.75 0 (V)

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 5/26 http://www.m-system.co.jp/ ■ TEMPERATURE DATA CONVERSION Temperature data (thermocouple and RTD) are represented in engineering unit value, °C, expressed in signed 16 bits.

Input Type K Thermocouple Input Value Converted Data, Decimal ≤ -272°C -272.0 -150°C -150.0 1370°C 1370.0 ≥ 1472°C 1472.0 1472.0 1370.0 -272 -150 -150.0 -272.0 1370 1472 (°C) EXTENSION MODULE A ‘basic’ module can be attached with one ‘extension’ module. The extension module is powered from the basic module. By combining two modules, single station can handle mixed analog and discrete signals. Settings of the extension module are handled by Functional Blocks of the basic module. Refer to the instruction manual of the basic module for more information. ■ OUTPUT AT THE LOSS OF COMMUNICATION The extension module is set to ‘Hold Output’ by factory default setting. The LNS Plug-in Software (model: R7LPLG) is used to change the setting to ‘Reset Output.’ CONNECTING THE EXTENSION MODULE 1) Remove the extension connector cover located at the side of the basic module. 2) Connect the extension module. 3) Mount the combined module on a DIN rail.

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 6/26 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) ■ BASIC MODULE 4 5 6 7 1 2 3 10 11 12 13 2 3 41 15 16 17 18 7 8 96 (.28)

R7L-TS4 3 (.12)5.5 (.22) DIN RAIL 35mm wide 54 (2.13)17 (.66) 115 (4.53) 7–M3 SCREW TERMINALS for LONWORKS, POWER 18–M3 SCREW TERMINALS for I/O 6 (.24) 6 (.24) DIN RAIL 35mm wide 54 (2.13)17 (.66) ■ ANALOG OUTPUT 2 3 41 5 107 8 964 5 6 7 1 2 3 3 (.12)5.5 (.22) 7–M3 SCREW TERMINALS for LONWORKS, POWER 10–M3 SCREW TERMINALS for OUTPUT DIN RAIL 35mm wide 54 (2.13)17 (.66) 6 (.24) 50 (1 .97) 6 (.24) 18.5 (.73) 115 (4.53)

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 7/26 http://www.m-system.co.jp/ ■ EXTENSION MODULE, 8 POINTS 11.5 (.45) 7 86 9 10 2 31 4 5 65 (2.56) 3 (.12) 5.5 (.22) DIN RAIL 35mm wide 54 (2.13)17 (.66) 10–M3 SCREW TERMINALS for I/O 6 (.24) ■ EXTENSION MODULE, 16 POINTS 11.5 (.45) 10 11 12 13 2 3 41 15 16 17 18 7 8 96 94 (3.70) DIN RAIL 35mm wide 54 (2.13)17 (.66) 18–M3 SCREW TERMINALS for I/O 6 (.24)

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 8/26 http://www.m-system.co.jp/ DISCRETE INPUT MODULE, 16 points MODEL: R7L-DA16 SPECIFICATIONS Common: Positive or negative common (NPN/PNP) per 16 points Number of I/O: Input, 16 points Maximum inputs applicable at once: No limit (at 24 V DC) Input status indicator: LED turns ON with contact ON Isolation: Input to LonWorks or FG or power Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max. ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA Input current: ≤ 5.5 mA per point at 24 V DC Input resistance: Approx. 4.4 kΩ Maximum input frequency: 10 Hz (input terminal)

1 Hz (Network Variable)

Minimum input pulse requirements: 50 ms (input terminal) 500 ms (Network Variable) Accumulated pulse count: 0 – 999 999 999 (Maximum count depends upon Network Variable types) Overflow: Reset to 0 and restart counting FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.

NodeObject (extension module setting)
fbCNT (totalize pulse count on 8 channels)
fbDI (discrete input, RS-flip flop)
fbCMP (compare)
fbEN (encoder)
fbTMR (timer)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS NC COM XB XA XD XC XE XF NO. ID FUNCTION NO. ID FUNCTION

1 COM Common 10 NC No Connection

2 X0 Input 0 11 X1 Input 1

3 X2 Input 2 12 X3 Input 3

4 X4 Input 4 13 X5 Input 5

5 X6 Input 6 14 X7 Input 7

6 X8 Input 8 15 X9 Input 9

7 XA Input 10 16 XB Input 11

8 XC Input 12 17 XD Input 13

9 XE Input 14 18 XF Input 15

■ Input Circuit XB 15 X9 XF XD 14 X7 13 X5 12 X3 11 X1 9XE 8XC 7XA 6X8 5X6 4X4 3X2 2X0 COM 1COM 2X0 18 XF Control Circuit ■ Input Connection Examples 2X0 COM 18 XF PNP Connection 2X0 COM 18 XF NPN Connection Comm. Circuit V (–) U (+) FG NET2 NET2 NET1 NET1 LON WORKS LON WORKS EXTENSION CONNECTOR + – + –

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 9/26 http://www.m-system.co.jp/ NPN TRANSISTOR OUTPUT MODULE, 16 points MODEL: R7L-DC16A SPECIFICATIONS Common: Negative common (NPN) per 16 points Number of I/O: Output, 16 points Maximum outputs applicable at once: No limit (at 24 V DC) Output status indicator: LED turns ON with contact ON Isolation: Output to LonWorks or FG or power Rated load voltage: 24 V DC ±10 % Rated output current: 0.25 A per point, 2.0 A per common Residual voltage: ≤ 1.2 V Leakage current: ≤ 0.1 mA (When driving an inductive load, connect a diode in parallel with the load.) FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.

NodeObject (extension module setting)
fbCNT (count)
fbDO (discrete output, one-shot output)
fbCMP (compare)
fbEN (encoder)
fbTMR (timer)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS +24V YB YA YD YC YE YF NO. ID FUNCTION NO. ID FUNCTION 1 0 V 0 V (common) 10 +24 V 24 V DC

2 Y0 Output 0 11 Y1 Output 1

3 Y2 Output 2 12 Y3 Output 3

4 Y4 Output 4 13 Y5 Output 5

5 Y6 Output 6 14 Y7 Output 7

6 Y8 Output 8 15 Y9 Output 9

7 YA Output 10 16 YB Output 11

8 YC Output 12 17 YD Output 13

9 YE Output 14 18 YF Output 15

Comm. Circuit Control Circuit ■ Output Circuit YD 16 YB YF 15 Y9 14 Y7 13 Y5 12 Y3 11 Y1 9 YE 8 YC 7 YA 6 Y8 5 Y6 4 Y4 +24V +24V10 18 YF 1 0V Control Circuit ■ Output Connection Example 10V +24V 2Y0 18 YF 3FG NET2 NET2 NET1 NET1 V (–) U (+) LON WORKS LON WORKS EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 10/26 http://www.m-system.co.jp/ PNP TRANSISTOR OUTPUT MODULE, 16 points MODEL: R7L-DC16B SPECIFICATIONS Common: Positive common (PNP) per 16 points Number of I/O: Output, 16 points Maximum outputs applicable at once: No limit (at 24 V DC) Output status indicator: LED turns ON with contact ON Isolation: Output to LonWorks or FG or power Rated load voltage: 24 V DC ±10 % Rated output current: 0.25 A per point, 2.0 A per common Residual voltage: ≤ 1.2 V Leakage current: ≤ 0.1 mA (When driving an inductive load, connect a diode in parallel with the load.) FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.

NodeObject (extension module setting)
fbCNT (count)
fbDO (discrete output, one-shot output)
fbCMP (compare)
fbEN (encoder)
fbTMR (timer)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS +24V YB YA YD YC YE YF NO. ID FUNCTION NO. ID FUNCTION 1 0 V 0 V 10 +24 V 24 V DC (common)

Comm. Circuit Control Circuit ■ Output Circuit YD 16 YB YF 15 Y9 14 Y7 13 Y5 12 Y3 11 Y1 9 YE 8 YC 7 YA 6 Y8 5 Y6 4 Y4 +24V FG +24V10 18 YF 1 0V Control Circuit ■ Output Connection Example 2Y0 +24V 18 YF NET2 NET2 NET1 NET1 V (–) U (+) LON WORKS LON WORKS EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 11/26 http://www.m-system.co.jp/ PNP DISCRETE INPUT & NPN TRANSISTOR OUTPUT MODULE, 8 points each MODEL: R7L-DAC16 SPECIFICATIONS ■ COMMON SPECIFICATIONS Common: Negative common per 16 points Number of I/O: Input, 8 points; Output, 8 points Maximum I/O applicable at once: No limit (at 24 V DC) I/O status indicator: LED turns ON with contact ON Isolation: Input or output to LonWorks or FG or power ■ INPUT Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max. ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA Input current: ≤ 5.5 mA per point at 24 V DC Input resistance: Approx. 4.4 kΩ Maximum input frequency: 10 Hz (input terminal) Minimum input pulse requirements: 50 ms (input terminal) 500 ms (Network Variable) Accumulated pulse count: 0 – 999 999 999 (Maximum count depends upon Network Variable types) Overflow: Reset to 0 and restart counting ■ OUTPUT Rated load voltage: 24 V DC ±10 % Rated output current: 0.25 A per point, 2.0 A per common Residual voltage: ≤ 1.2 V Leakage current: ≤ 0.1 mA (When driving an inductive load, connect a diode in parallel with the load.) FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.

NodeObject (extension module setting)
fbCNT (totalize pulse count on 8 channels)
fbDO (discrete output, one-shot output)
fbDI (discrete input, RS-flip flop)
fbCMP (compare)
fbEN (encoder)
fbTMR (timer)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS 9 : : : : : : $0. 9 9 9 9 9 : NO. ID FUNCTION NO. ID FUNCTION

1 COM Common 10 +24V 24V DC

6 Y0 Output 0 15 Y1 Output 1

7 Y2 Output 2 16 Y3 Output 3

8 Y4 Output 4 17 Y5 Output 5

9 Y6 Output 6 18 Y7 Output 7

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 12/26 http://www.m-system.co.jp/ CIRCUIT DIAGRAM Input Circuit Comm. Circuit Control Circuit ■ Input Circuit ■ Output Circuit 17 Y5 +24V 8 Y4 16 Y3 7 Y2 15 Y1 6 Y0 14 X7 5 X6 13 X5 4 X4 12 X3 3 X2 COM FG NET2 NET2 NET1 NET1 +24V10 18 Y7

1 COM

■ I/O Connection Example 1COM +24V 6Y0 2X0 18 YF Output Circuit 1COM1 2X0 14 X7 Control Circuit V (–) U (+) LON WORKS LON WORKS EXTENSION CONNECTOR − +

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 13/26 http://www.m-system.co.jp/ DC VOLTAGE/CURRENT INPUT MODULE, 4 points MODEL: R7L-SV4 SPECIFICATIONS Isolation: Input 0 to input 1 to input 2 to input 3 to power input or LonWorks or FG Converted data range: 0 – 100.00 of the input range Linearization: Standard Input range Wide span voltage: -10 – +10 V DC(*), -5 – +5 V DC, 0 – 10 V DC, 0 – 5 V DC, 1 – 5 V DC; (*) Factory setting Narrow span voltage: -1 – +1 V DC, 0 – 1 V DC, Current range: -20 – +20 mA DC, 0 – 20 mA DC, 4 – 20 mA DC (Input range is selectable using the LNS Plug-in Software (model: R7LPLG)) Cold junction compensation: CJC sensor attached to the input terminals

Input resistance Wide span voltage: ≥ 1 MΩ Narrow span voltage: ≥ 100 kΩ Current range: 70 Ω Conversion rate / conversion accuracy: 80 msec. / ±0.1 % Temperature coefficient: ±0.015 %/°C (±0.008 %/°F) FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.
NodeObject (extension module setting)
fbCNT (count)
fbSV (DC voltage/current input, input range)
fbARM (alarm output)
fbCV (scaling)
fbLED (LED function)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS VL0 VL1 VH0 COM0 VH1 COM1 NC NC VL2 VH2 COM2 VL3 VH3 COM3 NO. ID FUNCTION NO. ID FUNCTION 1 VH0 Wide span volt. 0 10 VL0 Narrow span volt. 0

2 COM0 Common 0 11 I0 Current range 0

3 VH1 Wide span volt. 1 12 VL1 Narrow span volt. 1

4 COM1 Common 1 13 I1 Current range 1

5 NC No connection 14 NC No connection

6 VH2 Wide span volt. 2 15 VL2 Narrow span volt. 2

7 COM2 Common 2 16 I2 Current range 2

8 VH3 Wide span volt. 3 17 VL3 Narrow span volt. 3

9 COM3 Common 3 18 I3 Current range 3

Comm. Circuit Control Circuit 1VH0 ■ Input Connection Examples VHn VLn In – COMn

10 VL0

12 VL1

15 VL2

17 VL3

– COMn NARROW SPAN VOLTAGE VHn VLn In – COMn Be sure to close across VLn and In terminals for a current input. CURRENT RANGE FG NET2 NET2 NET1 NET1 V (–) U (+) LON WORKS LON WORKS EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 14/26 http://www.m-system.co.jp/ THERMOCOUPLE INPUT MODULE, 4 points MODEL: R7L-TS4 SPECIFICATIONS Isolation: Input 0 to input 1 to input 2 to input 3 to power input or LonWorks or FG Converted data range: Engineering unit value (°C) Linearization: Standard Thermocouple: K(*), E, J, T, B, R, S, C, N, U, L, P, PR (*) Factory setting (T/C type is selectable using the LNS Plug-in Software (model: R7LPLG)) Cold junction compensation: CJC sensor attached to the input terminals Input resistance: ≥ 30 kΩ Burnout sensing: ≤ 0.1 μA Conversion accuracy: ±1°C (±1.8°F); ±2.0°C (±3.6°F) for B, R, S, C, PR Conversion rate: 250 msec. Temperature coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span CJC error: ±1.0°C at 25°C ±10°C ±1.5°C (±2.7°F) for R, S, PR T/C BURNOUT INDICATION (°C) K (CA) -272 +1472 -150 to +1370 E (CRC) -272 +1120 -170 to +1000 J (IC) -260 +1300 -180 to +1200 T (CC) -272 + 500 -170 to + 400 B (RH) 24 1920 1000 to 1760 R -100 +1860 380 to 1760 S -100 +1860 400 to 1760 C (WRe 5-26) -52 +2416 100 to 2315 N -272 +1400 -130 to +1300 U -252 + 700 -200 to +600 L -252 +1000 -200 to +900 P (Platinel II) -52 +1496 0 to 1395 (PR) -52 +1860 300 to 1760 Downscale Upscale CONFORMANCE RANGE (°C) K (CA) -458 +2682 -238 to +2498 E (CRC) -458 +2048 -274 to +1832 J (IC) -436 +2372 -292 to +2192 T (CC) -458 +932 -274 to +752 B (RH) 75 3488 1832 to 3200 R -148 +3380 716 to 3200 S -148 +3380 752 to 3200 C (WRe 5-26) -62 +4381 212 to 4199 N -458 +2552 -202 to +2372 U -422 +1292 -328 to +1112 L -422 +1832 -328 to +1652 P (Platinel II) -62 +2725 32 to 2543 (PR) -62 +3380 572 to 3200 CONFORMANCE RANGE (°F) Downscale Upscale BURNOUT INDICATION (°F) T/C FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.

NodeObject (extension module setting)
fbCNT (count)
fbTS (thermocouple input & setting)
fbARM (alarm output)
fbCV (scaling)
fbLED (LED function)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS +IN0 –IN0 +IN1 +CJ0 –CJ0 +CJ1 –IN1 –CJ1 NC NC +IN2 +CJ2 –IN2 –CJ2 +IN3 +CJ3 –CJ3 –IN3 NO. ID FUNCTION NO. ID FUNCTION 1 +CJ0 CJC + 0 10 +IN0 T/C + 0 2 –CJ0 CJC – 0 11 –IN0 T/C – 0 3 +CJ1 CJC + 1 12 +IN1 T/C + 1 4 –CJ1 CJC – 1 13 –IN1 T/C – 1

6 +CJ2 CJC + 2 15 +IN2 T/C + 2 7 –CJ2 CJC – 2 16 –IN2 T/C – 2 8 +CJ3 CJC + 3 17 +IN3 T/C + 3 9 –CJ3 CJC – 3 18 –IN3 T/C – 3

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 15/26 http://www.m-system.co.jp/ CIRCUIT DIAGRAM Input Circuit Comm. Circuit Control Circuit 10 +IN0 ■ Input Connection Example +INn –INn +CJn –CJn 11 –IN0 1+CJ0 2–CJ0 +IN1 –IN1 +CJ1 –CJ1 +IN2 –IN2 +CJ2 –CJ2 +IN3 –IN3 +CJ3 –CJ3 INPUT 0 Input Circuit INPUT 1 Input Circuit INPUT 2 Input Circuit INPUT 3 T/C CJC SENSOR FG NET2 NET2 NET1 NET1 V (–) U (+) LON WORKS LON WORKS EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 16/26 http://www.m-system.co.jp/ RTD INPUT MODULE, 4 points MODEL: R7L-RS4 SPECIFICATIONS Isolation: Input 0 to input 1 to input 2 to input 3 to power input or LonWorks or FG Converted data range: Engineering unit value (°C) Linearization: Standard RTD: Pt 100 (JIS ’97, IEC)(*), Pt 100 (JIS ’89), JPt 100 (JIS ’89), Pt 50 Ω (JIS ’81), Ni 100, Cu 10, Cu 50 (*) Factory setting (RTD type is selectable using the LNS Plug-in Software (model: R7LPLG)) Sensing current: ≤ 1 mA Input resistance: ≥ 1 MΩ Maximum leadwire resistance: 100 Ω per wire Conversion accuracy: ±1°C (±1.8°F); ±3°C (±5.4°F) for Cu 10 Conversion rate: 250 msec. Temperature coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span RTD BURNOUT INDICA TION (°C) CONFORMANCE Downscale Upscale RANGE (°C) Pt 100 (JIS ’97, IEC) -240 +900 -200 to +850 Pt 100 (JIS ’89) -240 +900 -200 to +660 JPt 100 (JIS ’89) -236 +560 -200 to +510 Pt 50 Ω (JIS ’81) -236 +700 -200 to +649 Ni 100 -100 +252 -80 to +250 Cu 10 (@25°C) -212 +312 -50 to +250 Cu 50 -100 +200 -50 to +150 FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.

NodeObject (extension module setting)
fbCNT (count)
fbRS (RTD input & setting)
fbARM (alarm output)
fbCV (scaling)
fbLED (LED function)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS INA0 INb0 INA1 NC INB0 NC INb1 INB1 NC NC INA2 NC INb2 INB2 INA3 NC INB3 INb3 NO. ID FUNCTION NO. ID FUNCTION

1 NC No connection 10 INA0 RTD 0-A

2 INB0 RTD 0-B 11 INb0 RTD 0-b

3 NC No connection 12 INA1 RTD 1-A

4 INB1 RTD 1-B 13 INb1 RTD 1-b

6 NC No connection 15 INA2 RTD 2-A

7 INB2 RTD 2-B 16 INb2 RTD 2-b

8 NC No connection 17 INA3 RTD 3-A

9 INB3 RTD 3-B 18 INb3 RTD 3-b

Comm. Circuit Control Circuit

10 INA0

■ Input Connection Example INAn INBn INbn 2INB0

11 INb0

V (–) U (+) LON WORKS LON WORKS A B B

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 17/26 http://www.m-system.co.jp/ DC VOLTAGE OUTPUT MODULE, 2 points MODEL: R7L-YV2 SPECIFICATIONS Isolation: Output 0 to output 1 to power input or LonWorks or FG Converted data range: 0 – 100.00 of the output range Output range Wide span voltage: -10 – +10 V DC(*), -5 – +5 V DC, 0 – 10 V DC, 0 – 5 V DC, 1 – 5 V DC (*) Factory setting Narrow span voltage: -1 – +1 V DC, 0 – 1 V DC, (Output range is selectable using the LNS Plug-in Software (model: R7LPLG)) Operational range: -15 – +115 % of the output range (except -10 – +10 V DC); approx. -11.5 – +11.5 V DC (-10 – +10 V DC) Load resistance: ≥ 100 kΩ Conversion accuracy: ±0.1 % Temperature coefficient: ±0.015 %/°C (±0.008 %/°F) FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.

NodeObject (extension module setting)
fbCNT (count)
fbYV (DC voltage output, output range)
fbCV (scaling)
fbLED (LED function)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS NC VH0 VL0 NC COM0 COM0 VH1 COM1 VL1 COM1 NO. ID FUNCTION NO. ID FUNCTION

1 NC No connection 6 NC No connection

2 COM0 Common 0 7 VH0 Wide span volt. 0 3 COM0 Common 0 8 VL0 Narrow span volt. 0 4 COM1 Common 1 9 VH1 Wide span volt. 1 5 COM1 Common 1 10 VL1 Narrow span volt. 1 CIRCUIT DIAGRAM Output Circuit Comm. Circuit Control Circuit ■ Output Connection Examples

7 VH0

8 VL0

2 COM0

3 COM0

9 VH1

10 VL1

4 COM1

–COMn WIDE SPAN VOLTAGE VHn VLn + –COMn NARROW SPAN VOLTAGE 3FG NET2 NET2 NET1 NET1 V (–) U (+) LON WORKS LON WORKS EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 18/26 http://www.m-system.co.jp/ DC CURRENT OUTPUT MODULE, 2 points MODEL: R7L-YS2 SPECIFICATIONS Isolation: Output 0 to output 1 to power input or LonWorks or FG Converted data range: 0 – 100.00 of the output range Output range: 4 – 20 mA DC Load resistance: ≤ 600Ω Conversion accuracy: ±0.1 % Temperature coefficient: ±0.015 %/°C (±0.008 %/°F) FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.

NodeObject (extension module setting)
fbCNT (count)
fbYS (DC current output)
fbCV (scaling)
fbLED (LED function)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS NC NC NC COM0 NC COM1 NC NC NO. ID FUNCTION NO. ID FUNCTION

2 COM0 Common 0 7 I0 Current 0

3 NC No connection 8 NC No connection

4 COM1 Common 1 9 I1 Current 1

5 NC No connection 10 NC No connection

Comm. Circuit Control Circuit Output Circuit 7 I0 V (–) U (+) LON WORKS LON WORKS EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 19/26 http://www.m-system.co.jp/ REMOTE CONTROL RELAY CONTROL MODULE, 8 points MODEL: R7L-RR8 RECOMMENDED PRODUCTS (OPERATION CHECKED) Remote control relay: BR-12D, BR-22D (Mitsubishi Electric) WR6165 (Panasonic) Remote control transformer: BRT-10B, BRT-20B (Mitsubishi Electric) WR2301 (Panasonic) SPECIFICATIONS Common: Common per all points Number of I/O: Output, 8 points Maximum outputs applicable at once: No limit I/O status indicator: Feedback input status turns on with the input supplied. Output status LED turns on with the output ON. Isolation: Output to LonWorks or FG or power Rated load voltage: 24 V AC ±10 % (supplied by the remote control transformer) Load voltage frequency: 50 / 60 Hz FUNCTIONAL BLOCKS The following Functional Blocks are usable. Refer to the instruction manual for detailed information.

NodeObject (extension module setting)
fbCMP (compare)
fbRR (remote control relay control output)
fbDOEX (discrete output, extension module)
fbDIEX (discrete input, extension module) TERMINAL ASSIGNMENTS NC NC NO. ID FUNCTION NO. ID FUNCTION

1 NC No connection 10 NC No connection

2 C0 Common 11 Y0 Output 0

3 C1 Common 12 Y1 Output 1

4 C2 Common 13 Y2 Output 2

5 C3 Common 14 Y3 Output 3

6 C4 Common 15 Y4 Output 4

7 C5 Common 16 Y5 Output 5

8 C6 Common 17 Y6 Output 6

9 C7 Common 18 Y7 Output 7

■ Output Connection Example 2C0 9C7 18 Y7 3FG NET2 NET2 NET1 NET1 Remote Control Transformer blue white Remote Control Relay red blue Remote Control Relay red blue V (–) U (+) LON WORKS LON WORKS EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 20/26 http://www.m-system.co.jp/ DISCRETE INPUT EXTENSION MODULE, 8 points MODEL: R7L-EA8 SPECIFICATIONS Common: Positive or negative common (NPN/PNP) per 8 points Number of I/O: Input, 8 points Maximum inputs applicable at once: No limit (at 24 V DC) Input status indicator: LED turns ON with contact ON Isolation: Input to internal circuits Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max. ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA Input current: ≤ 5.5 mA per point at 24 V DC Input resistance: Approx. 4.4 kΩ TERMINAL ASSIGNMENTS NC COM NO. ID FUNCTION NO. ID FUNCTION

1 COM Common 6 NC No Connection

2 X0 Input 0 7 X1 Input 1

3 X2 Input 2 8 X3 Input 3

4 X4 Input 4 9 X5 Input 5

5 X6 Input 6 10 X7 Input 7

■ Input Circuit 10 X7 9X5 8X3 7X1 5X6 4X4 3X2 2X0 COM 1COM 2X0 10 X7 Control Circuit ■ Input Connection Examples 2X0 COM – + 10 X7 PNP Connection 2X0 COM – + 10 X7 NPN Connection EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 21/26 http://www.m-system.co.jp/ DISCRETE INPUT EXTENSION MODULE, 16 points MODEL: R7L-EA16 SPECIFICATIONS Common: Positive or negative common (NPN/PNP) per 16 points Number of I/O: Input, 16 points Maximum inputs applicable at once: No limit (at 24 V DC) Input status indicator: LED turns ON with contact ON Isolation: Input to internal circuits Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max. ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA Input current: ≤ 5.5 mA per point at 24 V DC Input resistance: Approx. 4.4 kΩ TERMINAL ASSIGNMENTS NC COM XB XA XD XC XE XF NO. ID FUNCTION NO. ID FUNCTION – +– + Input Circuit Control Circuit ■ Input Circuit XB 15 X9 XF XD 14 X7 13 X5 12 X3 11 X1 9XE 8XC 7XA 6X8 5X6 4X4 3X2 2X0 COM 1COM 2X0 18 XF Control Circuit ■ Input Connection Examples 2X0 COM 18 XF PNP Connection 2X0 COM 18 XF NPN Connection EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 22/26 http://www.m-system.co.jp/ NPN TRANSISTOR OUTPUT EXTENSION MODULE, 8 points MODEL: R7L-EC8A SPECIFICATIONS Common: Negative common (NPN) per 8 points Number of I/O: Output, 8 points Maximum outputs applicable at once: No limit (at 24 V DC) Output status indicator: LED turns ON with contact ON Isolation: Output to internal circuits Rated load voltage: 24 V DC ±10 % Rated output current: 0.25 A per point, 2.0 A per common Residual voltage: ≤ 1.2 V Leakage current: ≤ 0.1 mA (When driving an inductive load, connect a diode in parallel with the load.) TERMINAL ASSIGNMENTS +24 V 0 V NO. ID FUNCTION NO. ID FUNCTION 1 0 V 0 V (common) 6 +24 V 24 V DC

2 Y0 Output 0 7 Y1 Output 1

3 Y2 Output 2 8 Y3 Output 3

4 Y4 Output 4 9 Y5 Output 5

5 Y6 Output 6 10 Y7 Output 7

■ Output Circuit 1 0V 10 Y7 9 Y5 8 Y3 7 Y1 5 Y6 4 Y4 3 Y2 +24V +24V6 10 Y7 1 0V Control Circuit ■ Output Connection Example 2Y0 +24V 10 Y7 EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 23/26 http://www.m-system.co.jp/ NPN TRANSISTOR OUTPUT EXTENSION MODULE, 16 points MODEL: R7L-EC16A SPECIFICATIONS Common: Negative common (NPN) per 16 points Number of I/O: Output, 16 points Maximum outputs applicable at once: No limit (at 24 V DC) Output status indicator: LED turns ON with contact ON Isolation: Output to internal circuits Rated load voltage: 24 V DC ±10 % Rated output current: 0.25 A per point, 2.0 A per common Residual voltage: ≤ 1.2 V Leakage current: ≤ 0.1 mA (When driving an inductive load, connect a diode in parallel with the load.) TERMINAL ASSIGNMENTS +24V YB YA YD YC YE YF NO. ID FUNCTION NO. ID FUNCTION 1 0 V 0 V (common) 10 +24 V 24 V DC +24V 18 YF 1 0V Control Circuit Output Circuit Control Circuit ■ Output Circuit YD 16 YB YF 15 Y9 14 Y7 13 Y5 12 Y3 11 Y1 9 YE 8 YC 7 YA 6 Y8 5 Y6 4 Y4 3 Y2 +24V ■ Output Connection Example 2Y0 +24V

18 YF EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 24/26 http://www.m-system.co.jp/ PNP TRANSISTOR OUTPUT EXTENSION MODULE, 8 points MODEL: R7L-EC8B SPECIFICATIONS Common: Positive common (PNP) per 8 points Number of I/O: Output, 8 points Maximum outputs applicable at once: No limit (at 24 V DC) Output status indicator: LED turns ON with contact ON Isolation: Output to internal circuits Rated load voltage: 24 V DC ±10 % Rated output current: 0.25 A per point, 2.0 A per common Residual voltage: ≤ 1.2 V Leakage current: ≤ 0.1 mA (When driving an inductive load, connect a diode in parallel with the load.) TERMINAL ASSIGNMENTS +24 V 0 V NO. ID FUNCTION NO. ID FUNCTION 1 0 V 0 V 6 +24 V 24 V DC (common) ■ Output Circuit 1 0V 10 Y7 9 Y5 8 Y3 7 Y1 5 Y6 4 Y4 3 Y2 +24V +24V6 10 Y7 1 0V Control Circuit ■ Output Connection Example 2Y0 +24V 10 Y7 EXTENSION CONNECTOR

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 25/26 http://www.m-system.co.jp/ PNP TRANSISTOR OUTPUT EXTENSION MODULE, 16 points MODEL: R7L-EC16B SPECIFICATIONS Common: Positive common (PNP) per 16 points Number of I/O: Output, 16 points Maximum outputs applicable at once: No limit (at 24 V DC) Output status indicator: LED turns ON with contact ON Isolation: Output to internal circuits Rated load voltage: 24 V DC ±10 % Rated output current: 0.25 A per point, 2.0 A per common Residual voltage: ≤ 1.2 V Leakage current: ≤ 0.1 mA (When driving an inductive load, connect a diode in parallel with the load.) TERMINAL ASSIGNMENTS +24V YB YA YD YC YE YF NO. ID FUNCTION NO. ID FUNCTION 1 0 V 0 V 10 +24 V 24 V DC (common) ■ Output Circuit YD 16 YB YF 15 Y9 14 Y7 13 Y5 12 Y3 11 Y1 9 YE 8 YC 7 YA 6 Y8 5 Y6 4 Y4 3 Y2 +24V +24V10 18 YF 1 0V Control Circuit ■ Output Connection Example 2Y0 +24V

MODEL: R7L R7L SPECIFICATIONS ES-7804 Rev.13 Page 26/26 http://www.m-system.co.jp/ Specifications are subject to change without notice.

Product Information

R7L specifications and overview.

Summary

Remote I/O R7 Series LonWorks I/O MODULE

Description

Remote I/O R7 Series LonWorks I/O MODULE

Source title R7L Datasheet(PDF) - M-System Co.,Ltd.

Related Parts

More parts from the same family.

Browse manufacturer

R7L

Read R7L online.

R7L MSYSTEM | Alldatasheet

Document overview

Technical content

ORDERING INFORMATION

RELATED PRODUCTS

24 V AC ±10 % (50 / 60 Hz)

1 NET1 L ON WORKS communication 1

2 NET2 L ON WORKS communication 2

3 FG FG

4 NET1 L ON WORKS communication 1

5 NET2 L ON WORKS communication 2

6 U (+) Power input

7 V (

1 Hz (Network Variable)

1 COM Common 10 NC No Connection

2 X0 Input 0 11 X1 Input 1

3 X2 Input 2 12 X3 Input 3

4 X4 Input 4 13 X5 Input 5

5 X6 Input 6 14 X7 Input 7

6 X8 Input 8 15 X9 Input 9

7 XA Input 10 16 XB Input 11

8 XC Input 12 17 XD Input 13

9 XE Input 14 18 XF Input 15

2 Y0 Output 0 11 Y1 Output 1

3 Y2 Output 2 12 Y3 Output 3

4 Y4 Output 4 13 Y5 Output 5

5 Y6 Output 6 14 Y7 Output 7

6 Y8 Output 8 15 Y9 Output 9

7 YA Output 10 16 YB Output 11

8 YC Output 12 17 YD Output 13

9 YE Output 14 18 YF Output 15

1 COM Common 10 +24V 24V DC

6 Y0 Output 0 15 Y1 Output 1

7 Y2 Output 2 16 Y3 Output 3

8 Y4 Output 4 17 Y5 Output 5

9 Y6 Output 6 18 Y7 Output 7

1 COM

2 COM0 Common 0 11 I0 Current range 0

4 COM1 Common 1 13 I1 Current range 1

5 NC No connection 14 NC No connection

7 COM2 Common 2 16 I2 Current range 2

9 COM3 Common 3 18 I3 Current range 3

10 VL0

12 VL1

15 VL2

17 VL3

1 NC No connection 10 INA0 RTD 0-A

2 INB0 RTD 0-B 11 INb0 RTD 0-b

3 NC No connection 12 INA1 RTD 1-A

4 INB1 RTD 1-B 13 INb1 RTD 1-b

6 NC No connection 15 INA2 RTD 2-A

7 INB2 RTD 2-B 16 INb2 RTD 2-b

8 NC No connection 17 INA3 RTD 3-A

9 INB3 RTD 3-B 18 INb3 RTD 3-b

10 INA0

11 INb0

1 NC No connection 6 NC No connection

7 VH0

8 VL0

2 COM0

3 COM0

9 VH1

10 VL1

4 COM1

2 COM0 Common 0 7 I0 Current 0

3 NC No connection 8 NC No connection

4 COM1 Common 1 9 I1 Current 1

5 NC No connection 10 NC No connection

1 NC No connection 10 NC No connection

2 C0 Common 11 Y0 Output 0

3 C1 Common 12 Y1 Output 1

4 C2 Common 13 Y2 Output 2

5 C3 Common 14 Y3 Output 3

6 C4 Common 15 Y4 Output 4

7 C5 Common 16 Y5 Output 5

8 C6 Common 17 Y6 Output 6

9 C7 Common 18 Y7 Output 7

1 COM Common 6 NC No Connection