R71MW2100AA20K | DigiCamel IC Datasheet

Online Datasheet

Read R71MW2100AA20K online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 21

Technical content

V oltage range: 420 – 1,000 VDC Ca pacitance range: 0.01 µF – 22 µF L ead Spacing: 10 – 37.5 mm Ca pacitance tolerance: ±10%, ±20%, ±5% (on request) C limatic category: 55/105/56 IEC 60068-1
Operating temperature range of −55˚C to +105˚C R oHS compliance and lead-free terminations T ape and reel packaging in accordance with IEC 60286–2 Self-healing Overview The R71 Series is constructed of metallized polypropylene film with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a self-extinguishing solvent resistant plastic case with thermosetting resin material meeting UL 94V–0 requirements.

Applications

Typical applications include power factor correction and pulse applications. Not suitable for across-the-line application (see Suppressor Capacitors). Polypropylene Pulse/High Frequency Capacitors R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Part Number System R71 M F 2100 AA 00 J Series Rated Voltage (VDC) Lead Spacing (mm) Capacitance Code (pF) Packaging Internal Use Capacitance Tolerance Metallized Polypropylene M = 420 V = 520 P = 630 Q = 1,000 F = 10.0 I = 15.0 N = 22.5 R = 27.5 W = 37.5 The last three digits represent si gnificant fi gures. The first d igit specifies the t otal number of zeros to be added. See Ordering Options Table 00, 10, 20, 30, 40 (Standard) J = ±5% K = ±10% M = ±20%

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 22.5 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4 +2/-0 AA Ammo Pack H0= 18.5 +/-0.5 DQ Other Lead and Packaging Options Tape & Reel (Standard Reel) H0=18.5 +/- 0.5 GY Tape & Reel (Large Reel) H0=18.5 +/- 0.5 CK Bulk (Bag)–Short Leads 3.5 +0.5/-0 JB Bulk (Bag)–Short Leads 4.0 +0.5/-0 JE Bulk (Bag)–Short Leads 3.2 +0.3/-0.2 JH Bulk (Bag)–Long Leads 18 +1/-1 JM Bulk (Bag)–Long Leads 30 +5/-0 40 Bulk (Bag)–Long Leads 25 +2/-1 50 27.5 Standard Lead and Packaging Options Bulk (Tray) – Straight Leads 4 +2/-0 AA Other Lead and Packaging Options Tape & Reel (Large Reel) H0=18.5 +/-0.5 CK Bulk (Bag)–Short Leads 3.5 +0.5/-0 JB Bulk (Bag)–Short Leads 4.0 +0.5/-0 JE Bulk (Bag)–Short Leads 3.2 +0.3/-0.2 JH Bulk (Bag)–Long Leads 18 +1/-1 JM Bulk (Bag)–Long Leads 30 +5/-0 40 Bulk (Bag) – Long Leads 25 +2/-1 50 37.5 Standard Lead and Packaging Options Bulk (Tray) – Straight Leads 4 +2/-0 AA Other Lead and Packaging Options Bulk (Bag)–Short Leads 3.5 +0.5/-0 JB Bulk (Bag)–Short Leads 4.0 +0.5/-0 JE Bulk (Bag)–Short Leads 3.2 +0.3/-0.2 JH Bulk (Bag)–Long Leads 18 +1/-1 JM Bulk (Bag)–Long Leads 30 +5/-0 40 Bulk (Bag) – Long Leads 25 +2/-1 50

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Dimensions – Millimeters H p LL d L B FRONT VIEW SIDE VIEW p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Note: See Ordering Options Table for lead length (LL/Ho) options.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Performance Characteristics Dielectric Polypropylene film Plates Metal layer deposited by evaporation under vacuum Winding Non-inductive type Leads Tinned wire Protection Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Rated Voltage VR (VDC) 420 520 630 1000 Rated Voltage VR (VAC) 220 250 275 275 Capacitance Range (µF) 0.01 – 22 0.01 – 22 0.01 – 15 0.22 – 10 Capacitance Values E12 series (IEC 60063) measured kHz and +20 ±1°C Capacitance Tolerance ±10%, ±20%, ±5% on request Operating Temperature Range −40°C to +110°C Ra ted Temperature TR +105°C Voltage Derating Above +105°C DC and AC voltage derating is 4%/°C Climatic Category 40/110/56 IEC 60068-1 Storage Conditions Storage time: months from the date marked on the label package Average relative humidity per year 70% R H 85% for days randomly distributed throughout the year Dew is absent Temperature: -40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Performance Characteristics cont'd * typical value Test Voltage 1.6 x VR VDC for 2 seconds (between terminations) @ +25°C ±5°C C apacitance Drift Maximum 0.5% after a year storage period at a temperature of +10°C to +40°C and a relative humidity of 40% to 60% Maximum Pulse Steepness dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp <V R), the specified dv/dt c an be multiplied by the factor V R/Vpp Temperature C oefficient −(200 ±100) ppm/°C at kHz Self Inductance (Lead Length ~ 2 mm) Lead Spacing (mm) 10 15 22.5 27.5 37.5 L (nH) ≈ 9 10 18 18 20 Maximum 1 nH per 1 mm lead and capacitor length. Dissipation Factor tanδ ≤ 0.1% (0.06%)* 25°C ±5°C typical value) Insulation Resistance Measured +25°C ±5°C, 100 VDC seconds Minimum Values Between Terminals C 0.33 μF C 0.33 μF ≥ 100,000 MΩ ( ≥ 500,000 MΩ )* ≥ 30,000 MΩ • µF

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40ºC)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40ºC)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Environmental Test Data Damp Heat, Steady State Test Test Conditions: Performances Test 1st Temperature: Relative humidity (RH): Test duration: +40°C 2°C 93% ± 2% 56 days │Δ C/C│ 5%, IR after test 50% of initial limit Te st 2nd Temperature: Relative humidity (RH): Test duration: +60°C 2°C 95% ± 2% 500 hours Endurance Test Test Conditions Performances Temperature: Voltage applied: Test duration: +105°C ±2°C 1.25 x VR (DC) 2,000 hours │Δ C/C│ ≤ 5%, IR after test ≥ 50% of initial limit Resistance to Soldering Heat Test Test Conditions Performances Solder bath temperature: Dipping time (with heat screen): 260°C ± 5°C 10 seconds ±1 second C/C│ ≤ 2% Environmental Compliance All KEMET pulse capacitors are RoHS Compliant.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Table 1 – Ratings & Part Number Reference (1) Insert lead and packaging code. See Ordering Options Table for available options. (3) M = ±20% (only available tolerance) VDC VAC Capacitance Value (µF) Dimensions in mm Lead Spacing (p) Φ d (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part NumberB H L 420 220 0.010 4 9 13 10 0.6 250 210000 71MF2100(1)00(2) R71MF2100(1)00(2) VDC VAC Capacitance Value (µF) B (mm) H (mm) L (mm) Lead Spacing (p) Φ d (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part Number

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Table 1 – Ratings & Part Number Reference cont'd (1) Insert lead and packaging code. See Ordering Options Table for available options. (3) M = ±20% (only available tolerance) VDC VAC Capacitance Value (µF) Dimensions in mm Lead Spacing (p) Φ d (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part NumberB H L VDC VAC Capacitance Value (µF) B (mm) H (mm) L (mm) Lead Spacing (p) Φ d (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part Number

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications VDC VAC Capacitance Value (µF) Dimensions in mm Lead Spacing (p) Φ d (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part NumberB H L VDC VAC Capacitance Value (µF) B (mm) H (mm) L (mm) Lead Spacing (p) Φ d (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part Number Table 1 – Ratings & Part Number Reference cont'd (1) Insert lead and packaging code. See Ordering Options Table for available options. (3) M = ±20% (only available tolerance)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Manual Soldering Recommendations Following is the recommendation for manual soldering with a soldering iron. The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. Recommended Soldering Temperature 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 8 Soldering time (sec) Soldering iron bit temperature (deg C) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through- hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations 100 150 200 250 300 0 40 80 120 160 200 240 Temperature (°C) Time (s) ca 2°C/s ca 3.5°C/s typical ca 5°C/s Cooling 2+3s max 115°C max Tpreheat ΔT <150°C 100°C Preheating Typical First wave Second wave 260°C

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Pitch mm Capacitor Pitch = 15 mm Capacitor Pitch > 15 mm Capacitor Pitch mm Capacitor Pitch > 15 mm Polyester 130°C 130°C 130°C 270°C 270°C Polypropylene 100°C 110°C 130°C 260°C 270°C Paper 130°C 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: S et the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however , instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Construction Detailed Cross Section Self-Extinguishing Resin Molded Plastic Case Molded Plastic Case Leads Metal Contact Layer Metal Contact Layer Margin Single-sided Metallized Polypropylene Film (Second Layer) Single-sided Metallized Polypropylene Film (First Layer) Margin Margin Single-sided Metallized Polypropylene Film FILM WINDING SCHEME OPTIONS

1 Section

Single-sided Metallized Polypropylene Film

2 Sections

3 Sections 4 Sections

Double-sided Metallized Polyester Film

3 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Film

4 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Polypropylene Film Dielectric Sulfide Film (SMR) Metallized Impregnated Paper Metallized Impregnated Paper Single-sided Metallized Polyester Film Single-sided Metallized Polyester Film Polypropylene Film Dielectric AXIAL - Polypropylene Film/Foil AXIAL - Single-sided Metallized Polypropylene Film Single-sided Metallized Polyester Film AXIAL - Single-sided Metallized Polyester Film AXIAL - Double-sided Metallized Polyester Film Winding Scheme

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Marking TOPFRONT Series Dielectric Code Manufacturing Date Code Capacitance Capacitance Tolerance Rated Voltage

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Packaging Quantities Lead Spacing Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped 4.0 9.0 13.0 2,000 1,800 750 1,500 1,000 5.0 11.0 13.0 1,300 1,500 600 1,250 800 6.0 12.0 13.0 1,000 1,200 500 1,000 680 5.0 11.0 18.0 2,000 1,000 600 1,250 800 6.0 12.0 18.0 1,750 900 500 1,000 680 6.0 17.5 18.0 1,000 700 500 1,000 680 7.5 13.5 18.0 1,000 700 350 800 500 7.5 18.5 18.0 900 500 - 800 500 8.5 14.5 18.0 1,000 500 300 700 440 9.0 12.5 18.0 1,000 520 270 650 410 10.0 16.0 18.0 750 500 300 600 380 11.0 19.0 18.0 450 350 - 500 340 13.0 12.0 18.0 750 490 200 480 280 22.5 6.0 15.0 26.5 805 500 700 464 7.0 16.0 26.5 700 500 550 380 8.5 17.0 26.5 468 300 450 280 10.0 18.5 26.5 396 300 350 235 11.0 20.0 26.5 360 250 350 217 13.0 22.0 26.5 300 200 300 - 27.5 9.0 17.0 32.0 816 408 450 11.0 20.0 32.0 560 336 350 13.0 22.0 32.0 480 288 300 13.0 25.0 32.0 480 288 14.0 28.0 32.0 352 176 18.0 33.0 32.0 256 128 22.0 37.0 32.0 168 112 37.5 11.0 22.0 41.5 420 252 13.0 24.0 41.5 360 216 16.0 28.5 41.5 216 108 19.0 32.0 41.5 192 96 20.0 40.0 41.5 126 84 24.0 44.0 41.5 108 72 30.0 45.0 41.5 90 60

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Lead Taping & Packaging (IEC 60286–2) Lead Spacing 7.5 mm Lead Spacing 10 & 15 mm Lead Spacing 22.5 & 27.5 Taping Specification Description Symbol Dimensions (mm) Lead Spacing Tolerance10.0 15.0 22.5 27.5 Taping lead space P 25.4 25.4 38.1 38.1 ±1 Feed hole lead space Lead spacing Component alignment ∆h 0 0 0 0 ±2 Component deviation ∆p 0 0 0 0 ±1 Height of component Carrier tape width W 18 18 18 18 +1/-0.5 Hold down tape width W 0 9 10 10 10 Minimum Hole position W1 9 9 9 9 ±0.5 Hold down tape position W2 3 3 3 3 Maximum Feed hole diameter D 0 4 4 4 4 ±0.2 * Available also 15 mm. Maximum 1 mm on 20 lead spacing. * 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request. **** H 0 = 16.5 mm is available upon request.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) H W T 360 340 59 Reel Specifications Dimensions (mm) D H W 355 500 25 55 Maximum Manufacturing Date Code (IEC–60062) Y = Year, Z = Month Year Code Month Code

2000 M January 1

2001 N February 2

2002 P March 3

2003 R April 4

2004 S May 5

2005 T June 6

2006 U July 7

2007 V August 8

2008 W September 9

2009 X October O

2010 A November N

2011 B December D

D W H H T W

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications KEMET Corporation World Headquarters

2835 KEMET Way

Simpsonville, SC 29681 Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offi ces Fort Lauderdale, FL Tel: 954-766-2800 North America Northeast Wilmington, MA Tel: 978-658-1663 Southeast Lake Mary, FL Tel: 407-855-8886 Central Novi, MI Tel: 248-994-1030 Irving, TX Tel: 972-915-6041 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Europe Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Skopje, Macedonia Tel: 389-2-55-14-623 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Kamen, Germany Tel: 49-2307-438110 Northern Europe Wyboston, United Kingdom Tel: 44-1480-273082 Espoo, Finland Tel: 358-9-5406-5000 Asia Northeast Asia Hong Kong Tel: 852-2305-1168 Shenzhen, China Tel: 86-755-2518-1306 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6701-8033 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 030_R71 • 2/24/2016 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required.

Product Information

R71MW2100AA20K specifications and overview.

Summary

R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications

Description

R71 Series Single Metallized Polypropylene Film, Radial, SMPS PFC Applications

Source title R71MW2100AA20K Datasheet(PDF) - Kemet Corporation

Related Parts

More parts from the same family.

Browse manufacturer