R5T510X477K050AGA030

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 One world. One KEMET Overview The low ESR, surge-robust T510 Series is designed for demanding applications that require high surge current and high ripple current capability. This series builds upon the proven capabilities of our industrial grade tantalum chip capacitors to offer several advantages such as low ESR, high ripple current capability, excellent capacitance stability, and improved resistance to high in-rush currents. These benefits are achieved though the utilization of multiple anodes as well as high-stress, low impedance electrical conditioning performed prior to screening. This series is classified as MSL (Moisture Sensitivity Level) 1 under J STD 020: unlimited floor life time at ≤30°C/85% RH. Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO2

Applications

Typical applications include decoupling and filtering in automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units requiring high ripple current capability. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Benefits

• C omplies with AEC–Q200 M eets or exceeds EIA standard 535BAAC T aped and reeled per EIA 481 H igh surge current capability
• O ptional gold-plated terminations H igh ripple current capability 00% surge current test 00% steady-state accelerated aging C apacitance values of 10 μF to 1,000 μF T olerances of ±10% and ±20% V oltage rating of 4 – 50 VDC C ase sizes E and X E SR as low as 18 mΩ R oHS Compliant and lead-free terminations O perating temperature range of −55˚C to +125˚C

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.

Ordering Information

T 510 X 477 M 006 A T A030 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Failure Rate/ Design Termination Finish ESR Packaging (C-Spec) T = Tantalum Multiple Anode Low ESR E X First two digits represent significant figures. Third digit specifies number of zeros. K = ±10% M = ±20% 004 = 4 006 = 6.3 010 = 10 015 = 15 020 = 20 025 = 25 035 = 35 050 = 50 A = N/A T = 100% Matte Tin (Sn) Plated* H = Standard Solder Coated (SnPb 5% Pb minimum) G = Gold Plated (A, B, C, D, X only) A = AUTO grade product 030 = Maximum ESR in mΩ at room temperature (30mΩ) Blank = 7" Reel 7280 = 13" Reel Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to 125°C Rated Capacitance Range 10 – 1,000 µF at 120 Hz/25°C Capacitance Tolerance K Tolerance (10%), M Tolerance (20%) Rated Voltage Range 4 – 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 Qualification Test Condition Characteristics Endurance 85°C at rated voltage, 2,000 hours 125°C at 2/3 rated voltage, 2,000 hours Δ C/C Within ±10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Storage Life 125°C at 0 volts, 2,000 hours Δ C/C Within ±10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Thermal Shock MIL –STD–202, Method 107, Condition B, mounted, −55C° to 125° C, 1,000 cycles Δ C/C Within ±5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Temperature Stability Extreme temperature exposure at a succession of continuous steps at +25ºC, −55ºC, +25ºC, +85ºC, +125ºC, +25ºC DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL Surge Voltage 85°C, 1.32 x rated voltage 1,000 cycles (125°C, 1.2 x rated voltage) Δ C/C Within ±5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Mechanical Shock/ Vibration MIL –STD–202, Method 213, Condition I, 100 G peak MIL –STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit Certification KEMET’s Internal Qualification Plan for this Tantalum series of capacitors follows AEC–Q200 guidelines. Standard catalog part types ordered without a specific automotive designator, i.e., suffix AUTO or four digit customer specific designator (C-Spec), are not considered KEMET Automotive Grade tantalum capacitors.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2

Electrical Characteristics

100 1,000 10,000 100,000 1,000,000 10,000,000 Capacitance (μF) Frequency (Hz) T510X226M035ATE100 T510X336M035ATE065 T510E476M035ATE050 Capacitance vs. FrequencyImpedance, ESR vs. Frequency 0.01 0.1 100 100 1,000 10,000 100,000 1,000,000 10,000,000 Impedance, ESR (Ohms) Frequency (Hz) T510X226M035ATE100_IMP T510X336M035ATE065_IMP T510E476M035ATE050_IMP T510X226M035ATE100_ESR T510X336M035ATE065_ESR T510E476M035ATE050_ESR Dimensions – Millimeters (Inches) Metric will govern H X T B B G F E A L R P SIDE VIEW ANODE (+) END VIEW BOTTOM VIEWCATHODE (-) END VIEW W S S Termination cutout at KEMET's option, either end Case Size Component Total Weight KEMET EIA L W H F ±0.1 ±(.004) S ±0.3 ±(.012) B ±0.15 (Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) (mg) X 7343–43 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 4.0±0.3 (0.157±0.012) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 430.15 E 7360–38 7.3±0.3 (0.287±0.012) 6.0±0.3 (0.236±0.012) 3.6±0.2 (0.142±0.008) 4.1 (0.161) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 500.73 Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 Table 1 – Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp MSL VDC @ 85ºC µF KEMET/EIA (See below for part options) µA @ +20ºC Max/5 Min % @ +20ºC 120 Hz Max mΩ @ +20ºC 100 kHz Max mA @ +25ºC 100 kHz mA @ +85ºC 100 kHz mA @ +125ºC 100 kHz ºC Reflow Temp ≤ 260ºC 4 680 X/7343-43 T510X687(1)004A(2)A030 27.2 6.0 30 3000 2700 1200 125 1 4 1000 X/7343-43 T510X108(1)004A(2)A035 40.0 6.0 35 2777 2499 1111 125 1 4 1000 E/7360-38 T510E108(1)004A(2)A018 40.0 6.0 18 3979 3581 1592 125 1 6.3 470 X/7343-43 T510X477(1)006A(2)A030 29.6 6.0 30 3000 2700 1200 125 1 6.3 680 X/7343-43 T510X687(1)006A(2)A023 42.8 6.0 23 3426 3083 1370 125 1 6.3 680 E/7360-38 T510E687(1)006A(2)A023 42.8 6.0 23 3520 3168 1408 125 1 10 330 X/7343-43 T510X337(1)010A(2)A035 33.0 6.0 35 2777 2499 1111 125 1 16 150 X/7343-43 T510X157(1)016A(2)A040 24.0 6.0 40 2598 2338 1039 125 1 16 220 X/7343-43 T510X227(1)016A(2)A040 35.2 10.0 40 2598 2338 1039 125 1 20 100 X/7343-43 T510X107(1)020A(2)A035 20.0 8.0 35 2777 2499 1111 125 1 20 100 X/7343-43 T510X107(1)020A(2)A040 20.0 6.0 40 2598 2338 1039 125 1 20 100 X/7343-43 T510X107(1)020A(2)A045 20.0 6.0 45 2449 2204 980 125 1 25 68 X/7343-43 T510X686(1)025A(2)A045 17.0 8.0 45 2449 2204 980 125 1 25 100 E/7360-38 T510E107(1)025A(2)A050 25.0 8.0 50 2387 2148 955 125 1 35 22 X/7343-43 T510X226(1)035A(2)A100 7.7 6.0 100 1643 1479 657 125 1 35 22 X/7343-43 T510X226(1)035A(2)A080 7.7 6.0 80 1837 1653 735 125 1 35 22 X/7343-43 T510X226(1)035A(2)A060 7.7 6.0 60 2121 1909 848 125 1 35 33 X/7343-43 T510X336(1)035A(2)A065 11.6 6.0 65 2038 1834 815 125 1 35 47 X/7343-43 T510X476(1)035A(2)A055 16.5 8.0 55 2216 1994 886 125 1 35 47 X/7343-43 T510X476(1)035A(2)A065 16.5 8.0 65 2038 1834 815 125 1 35 47 E/7360-38 T510E476(1)035A(2)A050 16.5 8.0 50 2387 2148 955 125 1 50 10 X/7343-43 T510X106(1)050A(2)A090 5.0 8.0 90 1732 1559 693 125 1 50 10 X/7343-43 T510X106(1)050A(2)A120 5.0 8.0 120 1500 1350 600 125 1 50 22 X/7343-43 T510X226(1)050A(2)A100 11.0 8.0 100 1643 1479 657 125 1 VDC @ 85ºC µF KEMET/EIA (See below for part options) µA @ +20ºC Max/5 Min % @ +20ºC 120 Hz Max mΩ @ +20ºC 100 kHz Max mA @ +25ºC 100 kHz mA @ +85ºC 100 kHz mA @ +125ºC 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp MSL (1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 Recommended Voltage Derating Guidelines −55°C to 85°C 85°C to 125°C % Change in Working DC Voltage with Temperature VR 67% of VR Recommended Maximum Application Voltage 50% of VR 33% of VR Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: . The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. . The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 25°C T ≤ 85°C T ≤ 125°C 1.00 0.90 0.40 T= Environmental Temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. KEMET Series and Case Code EIA Case Code Maximum Power Dissipation (P max) mWatts at 25°C w/+20°C Rise A 3216–18 75 B 3528–21 85 C 6032–28 110 D 7343–31 150 X 7343–43 165 E 7360–38 200 S 3216–12 60 T 3528–12 70 U 6032–15 90 V 7343–20 125 T510X 7343–43 270 T510E 7360–38 285 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = Z √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) 20% 40% 60% 80% 100% 120% −55 25 85 125 % Working Voltage % Change in Working DC Voltage with Temperature Temperature (ºC) 67% 33% Recommended Maximum Application Voltage (As % of Rated Voltage)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 85°C 5% of Rated Voltage 125°C 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. L S W W L Grid Placement Courtyard

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 Soldering Process KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the gold-colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (T Smin) 100°C 150°C Temperature Maximum (T Smax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (T L to TP) 3°C/seconds maximum 3°C/seconds maximum Liquidous Temperature (T L) 183°C 217°C Time Above Liquidous (t L) 60 – 150 seconds 60 – 150 seconds Peak Temperature (T P) 220°C* 235°C** 250°C* 260°C** Time within 5°C of Maximum Peak Temperature (t P) 20 seconds maximum 30 seconds maximum Ramp-down Rate (T P to TL) 6°C/seconds maximum 6°C/seconds maximum Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. Time Temperature Tsmin Tsmax TL TP Maximum Ramp Up Rate = 3ºC/sec Maximum Ramp Down Rate = 6ºC/sec tP tL ts 25ºC to Peak

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 Construction Leadframe (− Cathode) Leadframe (+ Anode) Tantalum Wire Molded Epoxy Case Molded Epoxy Case Polarity Bevel (+) Weld (to attach wire) Silver Adhesive Detailed Cross Section Tantalum Wire Tantalum Silver Paint (Fourth Layer) Washer Washer Polarity Stripe (+) Ta2O5 Dielectric (First Layer) Carbon (Third Layer) MnO2 (Second Layer) Capacitor Marking * 230 = 30th week of 2012 KEMET Multi-Anode MnO2 Polarity Indicator (+) Rated Voltage Picofarad Code KEMET ID Date Code* Date Code * 1st digit = Last number of Year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Table 3 – Packaging Quantity Case Code Tape Width (mm) 7" Reel* 13" Reel* KEMET EIA S 3216-12 8 2,500 10,000 T 3528-12 8 2,500 10,000 M 3528-15 8 2,000 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Q 7343-12 12 1,000 3,000 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E/T428P 7360-38 12 500 2,000 H 7360-20 12 1,000 2,500 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 8 mm (0.315") or or 330 mm (13.0")

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 Figure 5 – Reel Dimensions A D (See Note) Full Radius, See Note B (see Note) Access Hole at Slot Location (Ø 40 mm minimum) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth W3 (Includes flange distortion at outer edge) W2 (Measured at hub) W1 (Measured at hub) C (Arbor hole diameter) Note: Drive spokes optional; if used, dimensions B and D shall apply. N Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178±0.20 (7.008±0.008) or 330±0.20 (13.000±0.008) 1.5 (0.059) 13.0+0.5/−0.2 20.2 (0.795)12 mm 16 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 8 mm (1.969) 8.4+1.5/−0.0 (0.331+0.059/−0.0) 14.4 (0.567) Shall accommodate tape width without interference12 mm 12.4+2.0/−0.0 (0.488+0.078/−0.0) 18.4 (0.724) (0.646+0.078/−0.0) 22.4 (0.882)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T 2055_T510_AUTO • 9/19/2016 Tantalum Surface Mount Capacitors – Automotive Grade T510 Series Automotive Grade Multiple Anode Low ESR MnO 2 KEMET Electronic Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation.