R5-TSV MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: R5T-SV R5T-SV SPECIFICATIONS ES-6117 Rev.7 Page 1/3 http://www.m-system.co.jp/ Remote I/O R5 Series DC VOLTAGE INPUT MODULE (screw terminal block) 137 (5.39) 18 (.71) (3.54) mm (inch) MODEL: R5T-SV[1][2][3]

ORDERING INFORMATION

  • Code number: R5T-SV[1][2][3] Specify a code from below for each [1] through [3]. (e.g. R5T-SV2W/Q)
  • Specify the specification for option code /Q (e.g. /C01/S01) [1] NO. OF CHANNELS 1: 1 channel 2: 2 channels [2] COMMUNICATION MODE S: Single W: Dual [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R5-BS) Input: M3.5 screw terminal block (torque 0.8 N·m) Internal power: Via the base (model: R5-BS) Screw terminal: Nickel-plated steel (standard) or stainless steel Isolation: Input 1 to input 2 to internal bus or internal power Input range: Selectable with the side DIP SW RUN indicator: Bi-color (red/green) LED; Red when the bus A operates normally; Green when the bus B operates normally; Amber when both buses operate normally. INPUT SPECIFICATIONS ■ Narrow Span: -1 – +1 V, 0 – 1 V DC Input resistance: 100 kΩ min. ■ Wide Span: -10 – +10 V, -5 – +5 V, 0 – 10 V, 0 – 5 V, 1 – 5 V DC Input resistance: 1 MΩ min. INSTALLATION Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R5-BS) Weight: 110 g (0.24 lb) PERFORMANCE Conversion accuracy: ±0.05 % Data range: 0 – 10000 of the input range Data allocation: 1 (2 for 2-channel type) Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 0.2 sec. (0 – 90 %) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input 1 to input 2 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581

MODEL: R5T-SV R5T-SV SPECIFICATIONS ES-6117 Rev.7 Page 2/3 http://www.m-system.co.jp/ EXTERNAL VIEW RUN RUN LED ON Input 1 Input 2 2 3 4 5 6 7 8 ■ SIDE VIEW ■ FRONT VIEW EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) TERMINAL COVER 6–M3.5 TERMINAL SCREWS 8.2 (.32) 7.2 (.28) LOCKING CLAMP 90 (3.54) 5.6 (.22) 18 (.71) POSITIONING GUIDE SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM NARROW SPAN WIDE SPAN INPUT 1 NARROW SPAN WIDE SPAN INPUT 2 Isolation Isolation DIP SWRUN LED Control Circuit Communication Circuit BUS CONNECTOR INTERNAL POWER INTERNAL BUS A INTERNAL BUS B* *For dual redundant communication. Note: Connect either wide or narrow span terminals for each channel. The section enclosed by broken line is with 2-ch. option.

MODEL: R5T-SV R5T-SV SPECIFICATIONS ES-6117 Rev.7 Page 3/3 http://www.m-system.co.jp/ Specifications are subject to change without notice.