R5-TDS MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: R5T-DS R5T-DS SPECIFICATIONS ES-6119 Rev.8 Page 1/3 http://www.m-system.co.jp/ Remote I/O R5 Series 4 – 20 mA INPUT MODULE (screw terminal block; 2-wire transmitter excitation supply) 137 (5.39) 18 (.71) (3.54) mm (inch) MODEL: R5T-DS[1][2][3]

ORDERING INFORMATION

Code number: R5T-DS[1][2][3] Specify a code from below for each [1] through [3]. (e.g. R5T-DS2W/S/Q)

  • Specify the specification for option code /Q (e.g. /C01/S01) [1] NO. OF CHANNELS 1: 1 channel 2: 2 channels [2] COMMUNICATION MODE S: Single W: Dual [3] OPTIONS (multiple selections) Input resistance blank: 100 Ω /S: 250 Ω (for smart transmitters) Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R5-BS) Input: M3.5 screw terminal block (torque 0.8 N·m) Internal power: Via the base (model: R5-BS) Screw terminal: Nickel-plated steel (standard) or stainless steel Isolation: Input 1 to input 2 to internal bus or internal power RUN indicator: Bi-color (red/green) LED; Red when the bus A operates normally; Green when the bus B operates normally; Amber when both buses operate normally. SUPPLY OUTPUT Output voltage: 24 – 29 V DC with no load Current rating: ≤ 22 mA DC
  • Shortcircuit Protection Current limited: 30 mA max. Protected time duration: No limit INPUT SPECIFICATIONS Input: 4 – 20 mA DC; input resistor incorporated INSTALLATION Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R5-BS) Weight: 110 g (0.24 lb) PERFORMANCE Conversion accuracy: ±0.05 % Data range: 0 – 10000 of the input range Data allocation: 1 (2 for 2-channel type) Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 0.2 sec. (0 – 90 %) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input 1 to input 2 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581

MODEL: R5T-DS R5T-DS SPECIFICATIONS ES-6119 Rev.8 Page 2/3 http://www.m-system.co.jp/ EXTERNAL VIEW RUN RUN LED EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) TERMINAL COVER 6–M3.5 TERMINAL SCREWS 8.2 (.32) 7.2 (.28) LOCKING CLAMP 90 (3.54) 5.6 (.22) 18 (.71) POSITIONING GUIDE

MODEL: R5T-DS R5T-DS SPECIFICATIONS ES-6119 Rev.8 Page 3/3 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM INPUT 1 INPUT 2W-XMTR EXC INTERNAL POWER INTERNAL BUS A INTERNAL BUS B* *For dual redundant communication. NPUF: The section enclosed by broken line is with 2-ch. option. Control Circuit RUN LED Communication Circuit Excitation Supply Isolation INPUT 2 INPUT 2W-XMTR EXC Excitation Supply Isolation BUS CONNECTOR ■ When Used as Current Input INPUT ■ When Used as DC Supply 2-WIRE TRANSMITTER 2-WIRE TRANSMITTER INPUT INPUT + 4 INPUT Specifications are subject to change without notice.