R58A BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Registration Mark Sensors with Single Color LED and Potentiometer Adjustment of Switching Threshold

  • Fast 10 kHZ switching frequency; 15 µs repeatability Rugged zinc alloy die-cast housing with high quality acrylic lens suitable for use around food processing applications: Sensor rated IEC IP67 Fixed-convergent sensing at 10 mm ± 3 mm (0.39 in ± 0.12 in) from the face of the lens
  • Easy selection of Light/Dark Operate (LO/DO) by selection switch Red or green LEDs available, depending on model
  • Parallel or perpendicular sensing image, depending on model
  • 20 millisecond OFF-delay by model WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models Models1 Output & Supply Voltage Focus Distance Sensing Image Orientation Emitter Color OFF-Delay R58ACG1 Bipolar NPN/PNP

10 V dc to 30 V dc

10 mm (0.39 in) Parallel to sensor length Parallel to sensor length Perpendicular to sensor length Green R58ACG1D 20 ms R58ACR1 Red R58ACR1D 20 ms R58ACG2 Perpendicular to sensor length Parallel to sensor length Perpendicular to sensor length Green R58ACG2D 20 ms R58ACR2 Red R58ACR2D 20 ms 1 Integral 2 m (6.5 ft) unterminated cable models are listed.

  • To order the 9 m (30 ft) PVC cable model, add the suffix "W/30" to the cabled model number. For example, R58ACG1 W/30. To order the 150 mm (6 in) PVC cable model, add the suffix "Q" to the model number. For example, R58ACG1Q. To order the 4-pin M12/Euro-style integral quick disconnect model, add the suffix "Q8" to the model number. For example, R58ACG1Q8. R58A Series Registration Mark Sensors Original Document 144736 Rev. B

12 April 2017

featuring a single emitter color and simplified sensor setup and adjustment.

  1. Switching Threshold Potentiometer

Figure 1. Features

  1. Align the light spot to the mark.
  2. Turn the potentiometer in the direction shown by the green LED until it switches.
  3. Align the light spot to the background.
  4. Turn the potentiometer, and count turns, in the direction shown by green LED until it switches.
  1. Turn potentiometer back half the number of turns from step 4. 6. Select Light Operate or Dark Operate. Specifications Supply Voltage and Current 10 V dc to 30 V dc (10% max. ripple within specified voltage range); 36 mA exclusive of load Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Bipolar; one current sourcing (PNP) and one current sinking (NPN) Output Rating 150 mA max. (each output) Off-state leakage current:< 10 microamps NPN saturation: < 200 mV at 10 mA and < 1.0 V at 150 mA PNP saturation: < 1 V at 10 mA and < 2.0 V at 150 mA Output Protection Circuitry Output Protection Circuitry Protected against output short-circuit, continuous overload, and false pulse on power-up Output Response Time 50 microseconds: 100 millisecond delay on power-up (outputs do not conduct) Repeatability 15 microseconds Sensing Image of lens; Image oriented either parallel or perpendicular to sensor length, by model (see Models on page 1). Adjustments Light/Dark Operate (LO/DO) select switch, and 15-turn switchpoint adjustment potentiometer Indicators

1 Amber: Output active

2 Green: Switchpoint threshold adjustment indicators

Housing: Zinc alloy die-cast housing with black painted finish and o-ring sealed lens port cap Lens: Acrylic Lens port cap and lens holder: ABS Sensitivity and LO/DO adjusters: Acetal QD: Anodized aluminum Environmental Rating IEC IP67; NEMA 6 Connections PVC-jacketed 4-conductor 2 m (6.5 ft); 9 m (30 ft) attached cable; integral 4-pin Euro-style QD fitting; or 150 mm (6 in) with 4-pin Euro-style QD fitting. Mating QD cordsets are purchased separately. Operating Conditions Temperature: − 10 °C to +55 °C (+14 °F to +131 °F) Storage Temperature − 20 °C to +80 °C (− 4 °F to +176 °F) 90% at +50 °C maximum relative humidity (non-condensing) Vibration and Shock All models meet IEC 68-2-6 and IEC 68-2-27 testing criteria Application Notes Do not mount the sensor directly perpendicular to shiny surfaces; position it at approximately 15 angle in relation to the sensing target. Minimize web or product "flutter" whenever possible to maximize sensing reliability. Position sensor near a roller if possible. The lens may be installed in either of the two lens ports. The lens port cap must be installed on the unused port for reliable operation. Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Certifications R58A Series Registration Mark Sensors P/N 144736 Rev. B www.bannerengineering.com - Tel: +1-763-544-3164 3

Max. torque 45 in-lbs Default lens position Accessories Quick-Disconnect (QD) Cordsets 4-Pin Threaded M12/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) R58A Series Registration Mark Sensors 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 144736 Rev. B

15° offset bracket 12-gauge stainless steel SMB55F Flat-mount bracket

  • 12-gauge stainless steel SMB55RA Right-angle bracket
  • 12-gauge stainless steel SMB55S 15° offset bracket 12-gauge stainless steel Replacement Lens UC-R55 Replacement lens for R58A, R58B, and R58E Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. R58A Series Registration Mark Sensors © Banner Engineering Corp. All rights reserved