R5861282050T0K

R58 KEMET | Alldatasheet

Document overview

• PDF pages: 21

Technical content

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

• A pprovals: ENEC, UL, cUL (in progress) C lass X1 (IEC 60384-14) T HB Grade IIIB: 85°C, 85% RH, 1,000 hours at 600 VAC acc. to IEC 60384-14 T HB Grade IIIB: 85°C, 85% RH, 1,000 hours at 1,200 VDC acc. to IEC 60384-14 L ow Halogen Content according to JS709C R ated AC voltage: 600 VAC 50/60 Hz R ated DC voltage: 1,200 VDC C apacitance range: 0.01 – 8.2 µF L ead spacing: 15.0 – 52.5 mm
• C apacitance tolerance: ±20%, ±10% C limatic category 40/110/56, IEC 60068-1 T ape and reel in accordance with IEC 60286-2 R oHS compliant and lead-free terminations
• Operating temperature range of −40°C to +110°C 00% screening factory test at 3,000 VDC
• S elf-healing properties
• A utomotive (AEC–Q200) grade Overview The R58 is constructed of metallized polypropylene film encaps ulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V–0. Automotive Grade devices meet the demanding Automotive Electronics Council's AEC–Q200 qualification requirements.

Applications

For worldwide use in electromagnetic interference (EMI) suppression in across-the-line applications that require X1 safety classification. T ypical Industrial, Solar inverter output EMI filtering and Automotive HV DC bus filtering. Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Customer Part Number R58 6 I 2470 00 T0 M Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Packaging Internal Use Capacitance Tolerance X1, Metallized Polypropylene 6 = 600 I = 15.0 N = 22.5 R = 27.5 W = 37.5 Y = 52.5 The last three digits represent significant fi gures. The first digit s pecifies number of z eros to be added. See Ordering Options Table K = ±10% M = ±20% Preliminary

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging LL Lead Length (mm) Lead and Packaging Code 22.5 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4.0 +2/−0 00 Pizza Pack – Short Leads 4.0 +2/−0 BB Ammo Pack H0 = 18.5 ±0.5 DQ1 Other Lead and Packaging Options Tape & Reel (Large Reel) H0 = 18.5 ±0.5 CK Tape & Reel (Standard Reel) H0 = 18.5 ±0.5 GY1 Bulk (Bag)2 – Short Leads 2.7 +0.5/−0 JA Bulk (Bag)2 – Short Leads 3.5 + 0.5/−0 JB Bulk (Bag)2 – Short Leads 4.0 +0.5/−0 JE Bulk (Bag)2 – Short Leads 3.2 + 0.3/−0.2 JH Bulk (Bag) – Long Leads 18 ±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 27.5 Standard Lead and Packaging Options Bulk (Tray) – Short Leads 4.0 +2/−0 00 Pizza Pack – Short Leads 4.0 +2/−0 BB Tape & Reel (Large Reel) H0 = 18.5 ±0.5 CK1 Other Lead and Packaging Options Bulk (Tray) – Short Leads 2.7 +0.5/−0 JA Bulk (Tray) – Short Leads 3.5 + 0.5/−0 JB Bulk (Tray) – Short Leads 4.0 +0.5/−0 JE Bulk (Tray) – Short Leads 3.2 + 0.3/−0.2 JH Bulk (Tray) – Long Leads 18 ±1 JM Bulk (Tray) – Long Leads 30 +5/−0 40 Bulk (Tray) – Long Leads 25 +2/−1 50 1 Not for all sizes, see "Packaging Quantities" table. 2 For lead spacing 22.5 case sizes ≥ 8.5*17*26.5 the parts are packed in Pizza box 335*320*34 mm. Preliminary

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Ordering Options Table cont. Lead Spacing Nominal (mm) Type of Leads and Packaging LL Lead Length (mm) Lead and Packaging Code 37.5 Standard Lead and Packaging Options Pizza Pack – Short Leads 4.0 +2/−0 00 Other Lead and Packaging Options Pizza Pack – Short Leads 2.7 +0.5/−0 JA Pizza Pack – Short Leads 3.5 + 0.5/−0 JB Pizza Pack – Short Leads 4.0 +0.5/−0 JE Pizza Pack – Short Leads 3.2 + 0.3/−0.2 JH Pizza Pack – Long Leads 18 ±1 JM Pizza Pack – Long Leads 30 +5/−0 40 Pizza Pack – Long Leads 25 +2/-1 50 52.5 Standard Lead and Packaging Options Pizza Pack – Short Leads 4.0 +2/−0 00 1 Not for all sizes, see "Packaging Quantities" table. 2 For lead spacing 22.5 case sizes ≥ 8.5*17*26.5 the parts are packed in Pizza box 335*320*34 mm. Preliminary

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Dimensions – Millimeters F 0.5 p 4-pin 2-pin 0.5 L T H LL S FRONT VIEW SIDE VIEW T p S S1 T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Note: See the Ordering Options Table for lead length (LL) options. * Box with Arc Shape Design F L H LL S FRONT VIEW Box with Arc Shape Design SIDE VIEW T Preliminary

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Performance Characteristics Dielectric Polypropylene fi lm Plates Metal layer deposited by evaporation under vacuum Winding Non-inductive type Leads Tinned wire Protection Plastic case, thermosetting resin-filled. Box material is solvent resistant and flame retardant according to UL94. Related Documents IEC 60384-14, EN 60384-14 Rated Voltage V R 600 VAC (50/60 Hz) / 1,200 VDC Capacitance Range 0.01 – 8.2 µF Capacitance Values E6 series (IEC 60063) measured at kHz and +20 ±1°C Capacitance Tolerance ±10%, ±20% Temperature Range −40°C to 110°C C limatic Category 40/110/56 IEC 60068-1 Storage Conditions Storage time: months from the date marked on the label package Average relative humidity per year 70% RH 85% for days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Approvals ENEC, UL, cUL (in progress) Dissipation Factor (tanδ) at 1 kHz Maximum Values at +25°C ±5°C Pitch = 15 mm Pitch = 22.5 or 27.5 mm Pitch = 37.5 or 52.5 mm 0.4% 0.3% 0.2% Test Voltage Between Terminations The 100% screening factory test is carried out at 3,000 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Insulation Resistance Measured at +25°C ±5°C, according to IEC 60384-2 Minimum Values Between Terminals Voltage Charge Voltage Charge Time C 0.33 μF C 0.33 μF

100 VDC 1 minute ≥ 1 • 105 MΩ

(≥ 5 • 105 MΩ)* ≥ 30,000 MΩ • µF *Typical Value Preliminary

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Performance Characteristics cont. 100 −40 −20 0 20 40 60 80 Relative Humidity (%) Temperature (°C) Maximum Humidity in Storage Condition

30 Days

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 Maximum Overtemperature ∆Tlim vs TAMB TAMB(°C) ∆Tlim (°C) Maximum Irms vs. TAMB Maximum Irms 20% 40% 60% 80% 100% 120% 105 100 110 115 120 125 130 135TAMB (°C) TAMB is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress T est Qualification for Passive Components. F or additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. Preliminary

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Impedance Graph 0.001 0.01 0.1 100 0.1 1 10 100 Z (Ohm) Frequency (MHz) 18nF, p. 15 68 nF, p. 22.5 270 nF, p. 27.5 1.8 µF, p. 37.5 8.2 µF, p. 52.5 Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384-14 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature Endurance IEC 60384-14 1.25 x 1200 VDC, 1,000 hours at upper rated temperature Vibration MIL –STD–202 Method 204 5 G for 20 minutes, 12 cycles each of 3 orientations. Use 8" X 5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure points at c orners of opposite sides. Parts mounted within from any secure point. Test from 10 – 2,000 Hz. Mechanical Shock MIL –STD–202 Method 213 Figure 1 of Method 213. Condition C Temperature Cycling JESD22–Method JA–104 1,000 cycles (−40°C to 110°C) Note: Measurement at hours after t est conclusion. 30 minute maximum dwell time at each temperature extreme. 1 minute maximum transition time. Active Flammability IEC 60384-14 VR + 20 surge pulses at 4 kV (pulse every 5 seconds) P assive Flammability IEC 60384-14 IEC 60384-1, IEC 60695-11-5 Needle Flame Test Biased Humidity According to Grade IIIB 85°C/85% RH and 600 VAC, 1,000 hours Capacitance change (∆C/C): 10% Dissipation factor change (∆tan δ): 10−3 (at kHz) for C µF Dissipation factor change (∆tan δ): 10−3 (at kHz) for C µF Insulation resistance Rins or time constant τ CR Rins: 50% of initial limit Biased Humidity According to Grade IIIB 85°C/85% RH and 1200 VDC, 1,000 hours Capacitance change (∆C/C): 10% Dissipation factor change (∆tan δ): 10−3 (at kHz) for C µF Dissipation factor change (∆tan δ): 10−3 (at kHz) for C µF Insulation resistance Rins or time constant τ CR Rins: 50% of initial limit Preliminary

8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Maximum Voltage (VRMS) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 15 mm 0.033 µF 0.068 µF 0.1 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 22.5 mm 0.1 µF 0.22 µF 0.33 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 27.5 mm 0.47 µF 0.82 µF 1.2 µF 1 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 37.5 mm 0.82 µF 1.8 µF 3.3 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 52.5 mm 4.7 µF 8.2 µF Preliminary

9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Maximum Current (IRMS) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 15 mm 0.033 µF 0.068 µF 0.1 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 22.5 mm 0.1 µF 0.22 µF 0.33 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 27.5 mm 0.47 µF 0.82 µF 1.2 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 37.5 mm 0.82 µF 1.8 µF 3.3 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 52.5 mm 4.7 µF 8.2 µF Preliminary

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Environmental Compliance All KEMET EMI capacitors are RoHS compliant. Low Halogen LH Approvals Certification Body Mark Specification File Number IMQ S.p.A. EN/IEC 60384–14 In Progress UL UL 60384–14 and CAN/ CSA–E60384–14 In Progress CQC IEC 60384–14 In Progress Preliminary

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Dimensions in mm Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part NumberT H L Capacitance Value (µF) T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part Number (1) Insert lead and packaging code. See table for available options. Preliminary

12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from 183ºC for SnPb eutectic alloys to 217 – 221ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm), and great care must be taken during soldering. T he recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. See Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the recommended limits may result in degradation of or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface-mount components. Insert through-hole parts after curing the surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if thr ough-hole components must pass through the adhesive curing process. A maximum of two soldering cycles is recommended. Allow time for the capacitor surface temperature to return to normal before the second soldering cycle. Manual Soldering Recommendations The following is the recommendation for manual soldering with a soldering iron. Soldering iron tip temperature should be set at 350°C (+10°C maximum), with the soldering dur ation not to exceed 3 seconds. Recommended Soldering Temperature 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) Soldering Iron Bit Temperature (°C) 100 150 200 250 300 0 40 80 120 160 200 240 Temperature (°C) Time (seconds) Cooling 2+3 seconds max260°C First Wave Second Wave ∆ T < 150°C ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Preheating Tpreheat Typical Wave Soldering Recommendations Figure 1 Preliminary

13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process. Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Pitch mm Capacitor Pitch > 15 mm Capacitor Pitch mm Capacitor Pitch > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 110°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: set the temperature so that the maximum temperature is below the. Dielectric Film Material Maximum Temperature Measured Inside the Element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath, as in normal flow soldering, without touching the solder . When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and then pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double-wave flow soldering outlined in this document. Howe ver, instead of two baths, there is only one with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double-wave flow soldering. Great care must be taken so that the parts do not overheat. Preliminary

14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) Vibration MIL-SDT-202 Method 204 5 g for 20 minutes, 12 cycles each of 3 orientations Use 8"X5" PCB, 0.031" thick. secure points on one side and secure p oints at corners of opposite sides. Parts mounted within from any s ecure point. Test from 10 – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitors with pitch 22.5 mm can be mechanically fixed by the leads, for pitch 22.5 mm, the capacitor body has to be properly fixed (e.g. clamped or glued). Construction Detailed Cross Section Self-Extinguishing Resin Molded Plastic Case Molded Plastic Case Leads Metal Contact Layer Metal Contact Layer Margin Single-sided Metallized Polypropylene Film (Second Layer) Single-sided Metallized Polypropylene Film (First Layer) Margin Single-sided Metallized Polypropylene Film FILM WINDING SCHEME OPTIONS

1 Section

Single-sided Metallized Polypropylene Film

2 Sections

3 Sections 4 Sections

Double-sided Metallized Polyester Film

3 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Film

4 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Polypropylene Film Dielectric Sulfide Film (SMR) Metallized Impregnated Paper Metallized Impregnated Paper Single-sided Metallized Polyester Film Single-sided Metallized Polyester Film Polypropylene Film Dielec- tric AXIAL - Polypropylene Film/Foil AXIAL - Single-sided Metallized Polypropylene Film Single-sided Metallized Polyester Film AXIAL - Single-sided Metallized Polyester Film AXIAL - Double-sided Metallized Polyester Film Winding Scheme Preliminary

15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Construction cont. Detailed Cross Section Self-Extinguishing Resin Molded Plastic Case Molded Plastic Case Leads Metal Contact Layer Metal Contact Layer Margin Single-sided Metallized Polypropylene Film (Second Layer) Single-sided Metallized Polypropylene Film (First Layer) Margin Marking Lead Spacing 15 mm, 22.5 mm, and 27.5 mm TOPFRONT Capacitance Tolerance Approval Marks Manufacturer’s Logo Capacitance Climatic Category Passive Flammability Category “B” Manufacturing Plant Date Code Rated Voltage THB Series Self Healing Series, Safety Class Preliminary

16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Marking cont. Lead Spacing 27.5 mm alternative*, 37.5 mm and 52.5 mm in rectangular box FRONT Approval Marks TOP Manufacturer’s Logo Capacitance, Capacitance Tolerance Series Self Healing Safety Class Climatic Category Rated Voltage, THB SeriesPassive Flammability Category “B” Manufacturing Plant Date Code * Differences caused by technology (clichee, laser or ink jet) and production line Preliminary

17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Marking cont. Lead Spacing 52.5 mm in Arc Shaped Design Case Passive Flammability Category “B” Manufacturing Plant Date Code Rated Voltage, THB Series Self Healing Series, Safety Class Approval Marks Manufacturer’s Logo Capacitance Climatic Category FRONT * Differences caused by technology (clichee, laser or ink jet) and production line Manufacturing Date Code (IEC-60062) Year Code Month Code

2020 M January 1

2021 N February 2

2022 P March 3

2023 R April 4

2024 S May 5

2025 T June 6

2026 U July 7

2027 V August 8

2028 W September 9

2029 X October O

2030 A November N

2031 B December D

18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Packaging Quantities Lead Spacing Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped Pizza Lead And Packaging Code: 00 - JA - JB JE - JH JM 40 - 50 GY CK DQ BB 5 11 18 2,000 1,250 1,000 600 1,250 800 1,122 6 12 18 1,750 1,000 900 500 1,000 680 935 7.5 13.5 18 1,000 800 700 350 800 500 748 8.5 14.5 18 1,000 650 500 300 700 440 663 10 16 18 750 550 500 270 600 380 561 11 19 18 450 400 350 – 500 340 510 22.5 6 15 26.5 805 450 500 – 700 464 660 7 16 26.5 700 450 500 – 550 380 564 8.5 17 26.5 468 350 300 – 450 280 468 10 18.5 26.5 396 350 300 – 350 235 396 11 20 26.5 360 200 250 – 350 217 360 13 22 26.5 300 150 200 – 300 – 300 27.5 11 20 32 560 336 336 – 350 – 300 13 22 32 480 288 288 – 300 – 250 14 28 32 352 176 176 – – – 230 18 33 32 256 128 128 – – – 170 22 37 32 168 112 112 – – – 150 37.5 11 22 42 420 252 252 – – – 210 13 24 42 360 216 216 – – – 175 16 28.5 42 216 108 108 – – – 140 19 32 42 192 96 96 – – – 119 20 40 42 126 84 84 – – – 112 24 44 42 108 72 72 – – – 91 30 45 42 90 60 60 – – – 77 52.5 Preliminary

20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Dimensions (mm) H W T 360 340 59 Reel Specifications Reel Size Dimensions (mm) D H W Standard 355 30 55 MaximumLarge 500 25 H T W D W H Preliminary

21© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3134_R58 • 7/10/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors R58, Class X1, THB Grade IIIB, 600 VAC, 110°C (Automotive Grade) KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. Preliminary