R53BI26805000K

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

• Approvals: ENEC, UL, cUL, CQC
• X2 C LASS (IEC 60384-14)
• TH B Grade IIIB: 85°C, 85% RH, 1,000 hours at 350 VAC/800 VDC acc. to IEC 60384-14
• Lo w Halogen Content according to JS709C
• Ra ted AC voltage: 350 VAC 50/60 Hz
• Ra ted DC Voltage: 800 VDC
• Recommended D C V oltage ≤ 1 000 V DC
• Ca pacitance range: 0.068 – 20 µF
• Le ad spacing: 15.0 – 52.5 mm
• Cap acitance tolerance: ±20%, ±10%
• Cl imatic category 40/110/56, IEC 60068-1
• Ta pe & Reel in accordance with IEC 60286-2
• Ro HS compliant and lead-free terminations
• Operating t emperature r ange o f − 40°C t o + 125°C
• 10 0% screening factory test at 1,900 VDC
• Se lf healing properties"
• Aut omotive (AEC-Q200) grade
• Pa rallel and Series construction available Overview The R53B series is constructed of metallized polypropylene film encapsulated with self-extinguishing r esin in a bo x of material that meets the requir ements of UL 94 V–0. The R53B series is ideal for harsh environmental conditions and meets the demanding Automotive Electronics Council's AEC–Q200 qualification r equirements.

Applications

For worldwide use in electromagnetic interference (EMI) suppression in across-the-line applications that require X2 safety classification. Intended for use in situations in which capacitor failur e would not r esult in exposur e t o electric shock. T ypical applications include connection in series with the mains, capacitive power supplies and energy meters, with special emphasis in automotive applications for severe ambient conditions such as On Board Chargers. Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Part Number System R53 B I 3100 00 0 0 M C-Spec Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Packaging Internal Use Internal Use Capacitance Tolerance (Optional) X2, Metallized Polypropylene B = 350 I = 15.0 N = 22.5 R = 27.5 W = 37.5 Y = 52.5 The last three digits represent s ignificant fig ures. T he fi rst d igit sp ecifies n umber o f ze ros to be added. See Ordering Options Table 0 = Internal Parallel Construction S = Internal Series Construction 0 = Internal Use K = ±10% M = ±20% Blank = Standard V103 = 4 pins, S = 37.5 mm, S1 =10.2 mm V104 = 4 pins, S = 37.5 mm, S1 =20.3 mm

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 22.5 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4 +2/−0 00 Pizza Pack – Short Leads 4 +2/−0 BB Ammo Pack H0 = 18.5 ±0.5 DQ1 Other Lead and Packaging Options Tape & Reel (Large Reel) H0 = 18.5 ±0.5 CK Tape & Reel (Standard Reel) H0 = 18.5 ±0.5 GY1 Bulk (Bag)2– Short Leads 2.7 +0.5/−0 JA Bulk (Bag)2– Short Leads 3.5 +0.5/−0 JB Bulk (Bag)2– Short Leads 4.0 +0.5/−0 JE Bulk (Bag)2– Short Leads 3.2 +0.3/−0.2 JH Bulk (Bag) – Long Leads 18 ±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 27.5 Standard Lead and Packaging Options Bulk (Tray) – Short Leads 4 + 2/−0 00 Pizza Pack – Short Leads 4 +2/−0 BB Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK1 Other Lead and Packaging Options Bulk (Tray) – Short Leads 2.7 +0.5/−0 JA Bulk (Tray) – Short Leads 3.5 +0.5/−0 JB Bulk (Tray) – Short Leads 4.0 +0.5/−0 JE Bulk (Tray) – Short Leads 3.2 +0.3/−0.2 JH Bulk (Tray) – Long Leads 18 ±1 JM Bulk (Tray) – Long Leads 30 +5/−0 40 Bulk (Tray) – Long Leads 25 +2/−1 50 37.5 Standard Lead and Packaging Options Pizza Pack – Short Leads 4 +2/−0 00 Other Lead and Packaging Options Pizza Pack – Short Leads 2.7 +0.5/−0 JA Pizza Pack – Short Leads 3.5 +0.5/−0 JB Pizza Pack – Short Leads 4.0 +0.5/−0 JE Pizza Pack – Short Leads 3.2 +0.3/−0.2 JH Pizza Pack – Long Leads 18 ±1 JM Pizza Pack – Long Leads 30 +5/−0 40 Pizza Pack – Long Leads 25 +2/−1 50 52.5 Standard Lead and Packaging Options Pizza Pack – Short Leads 4 +2/−0 00 1 Not for all sizes, see "Packaging Quantities" table. 2 For lead spacing 22.5 case sizes ≥8.5*17*26.5 the parts are packed in a Pizza box 335*320*34 mm

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Dimensions – Millimeters F 0.5 p 4-pin 2-pin 0.5 L T H LL S FRONT VIEW SIDE VIEW T p S S1 T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Note: See Ordering Options Table for lead length (LL/H 0) options. (1) Standard = 2 pins, C-Spec V103 = 4 pins (2) Standard = 2 pins, C-Spec V104 = 4 pins (3) Standard = 4 pins, S1 = 20.3mm

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Performance Characteristics Dielectric Polypropylene fil m Plates Metal layer deposited by evaporation under vacuum Winding Non-inductive type Leads Tinned wire Protection Plastic c ase, t hermosetting r esin fi lled. B ox m aterial i s s olvent r esistant a nd fl ame r etardant a ccording t o U L94. Related Documents IEC 60384-14, EN 60384-14 Rated Voltage V R 350 VAC (50/60 Hz) / 800 VDC Maximum O perational D C V oltage ≤ 1 ,000 V DC i n p arallel c onstruction ( 1,000 h Capacitance Range 0.068 –20 µF Capacitance Values E6 s eries ( IEC 6 0063) m easured a t 1 k Hz a nd + 20 ± 1°C Capacitance Tolerance ±10%, ±20% Temperature Range −40°C t o 1 25°C i n p arallel c onstruction Climatic Category 40/110/56 IEC 60068-1 Reliablity at AC Voltage Construction Temperature(°C) Voltage (Vac) Lifetime (khrs) [DeltaC = − 20%) 2-Series 85 250 220 2-Series 85 305 220 2-Series 85 330 175 2-Series 85 350 135 Parallel 85 250 150 Parallel 85 305 150 Parallel 85 330 115 Parallel 85 350 70 Reliablity at DC Voltage V R Operation life 100,000 hours at 85°C , 1,000 hours at 125°C in parallel construction

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Performance Characteristics cont. TAMB is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. Storage Conditions Storage t ime: ≤ 2 4 m onths f rom t he d ate m arked o n t he l abel p ackage Average r elative h umidity p er y ear ≤ 7 RH ≤ 8 5% f or 3 0 d ays r andomly d istributed t hroughout t he y ear Dew is absent Temperature: − 40 t o 8 0°C ( see " Maximum H umidity i n S torage C onditions" g raph b elow) Approvals ENEC, UL, cUL, CQC Dissipation Fa ctor ( tanδ) a t 1 k Hz AT 25°C ±5°C C ≤ 0 .47 µ F C > 0.47 µF 0.5% 0.3% Test Voltage Between Terminals The 100% screening factory test is carried out at 1,900 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. This test cannot be repeated, as there is a risk of damaging the capacitor. KEMET is not liable in such cases for any failures. Insulation Resistance Measured a t + 25°C ± 5°C, a ccording t o I EC 6 0384–2 Minimum Values Between Terminals Voltage Charge Voltage Charge Time C ≤ 0.33 μF C > 0.33 μF

100 VDC 1 minute ≥ 30,000 MΩ ≥ 10,000 MΩ • µF

−40 −20 0 20 40 60 80 Temperature (°C) Maximum Humidity in Storage Condition Relative Humidity (%)

30 Days

Maximum Irms vs. TAMB Maximum Irms 20% 40% 60% 80% 100% 120% 105 100 110 115 120 125 130 135TAMB (°C) Maximum Overtemperature ∆Tlim vs TAMB TAMB (°C) ∆Tlim AA(°C) 100 105 110 115 120 125 130 135

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Qualification Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regar ding test methods and conditions ar e r eferenced in document AEC-Q200, Str ess Test Qualification for P assive Components. For additional information r egarding the Automotive Electronics Council and AEC-Q200, please visit the website at www.aecouncil.com. Impedance Graph 0.01 0.1 100 1000 0.1 1 10 100 |Z| (Ω) Frequency (MHz) 68 nF - p 15 1µF - p 22.5 3.3 µF - p 27.5 6.8µF - p 37.5

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 37.5 mm 4.7 µF 5.6 µF 8.2 µF 10 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 27.5 mm 1 µF 1.5 µF 2.2 µF 3.9 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 15 mm 0.1 µF 0.22 µF 0.47 µF 1 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 22.5 mm 0.22 µF 0.47 µF 1 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 52.5 mm 15 µF 20 µF

8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Maximum Current (Irms) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 37.5 mm 4.7 µF 5.6 µF 8.2 µF 10 µF 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 27.5 mm 1 µF 1.5 µF 2.2 µF 3.9 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 15 mm 0.1 µF 0.22 µF 0.47 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 22.5 mm 0.22 µF 0.47 µF 1 µF 0.1 100 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 52.5 mm 15 µF 20 µF

9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384-14 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at rated temperature (110°C) Endurance IEC 60384-14 1.25 x VRDC, 1,000 hours at rated temperature (110°C) Vibration MIL-STD-202 Method 204 5 G for 20 minutes, 12 cycles each of 3 orientations. Use 8" X 5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 – 2,000 Hz. Mechanical Shock MIL-STD-202 Method 213 Figure 1 of Method 213. Condition C Temperature Cycling JESD22-Method JA-104 1,000 cycles (−40°C to 110°C) Note: Measurement at 24 ±4 hours after test conclusion. 30 minute maximum dwell time at each temperature extreme. 1 minute maximum transition time. Active Flammability IEC 60384-14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds) Pa ssive Flammability IEC 60384-14 IEC 6 0384–1, I EC 6 0695–11–5 N eedle fl ame t est Biased Humidity According to Grade IIIB (Certification pe nding) For Parallel and Series construction 85°C/85% RH and 350 VAC, 1,000 hours Capacitance c hange ( ∆C/C): ≤ 1 Dissipation f actor c hange ( ∆tan δ ): ≤ 1 50 * 1 0−4 (at 1 kHz for Cap > 1 µF) Dissipation f actor c hange ( ∆tan δ ): ≤ 2 40 * 1 0−4 (at 10 kHz) for Cap ≤ 1 µF IR ≥ 5 0% o f i nitial l imit o r m inimum 2 00 M Ω According to Grade IIIB (Certification pe nding) For Parallel construction only 85°C/85% RH and 350 VAC, 1,000 hours Capacitance c hange ( ∆C/C): ≤ 1 Dissipation f actor c hange ( ∆tan δ ): ≤ 1 50 * 1 0−4 (at 1 kHz for Cap > 1 µF) Dissipation f actor c hange ( ∆tan δ ): ≤ 2 40 * 1 0−4 (at 10 kHz) for Cap ≤ 1 µF IR ≥ 5 0% o f i nitial l imit o r m inimum 2 00 M Ω Approvals Certification Body Mark Specification File Number IMQ S-p.A. EN/IEC 60384–14 CA08.00236 UL UL 60384–14 and CAN/CSA E60384–14 (350 VAC) E97797 CQC IEC 60384–14 Pending

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Environmental Compliance All KEMET EMI capacitors are RoHS compliant. Low Halogen LH Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Dimensions in mm Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Legacy Part NumberT H L 0.068 5.0 11.0 18.0 15 400 53BI2680(1)00(2) R53BI2680(1)00(2) 0.1 6.0 12.0 18.0 15 400 53BI3100(1)00(2) R53BI3100(1)00(2) 0.15 7.5 13.5 18.0 15 400 53BI3150(1)00(2) R53BI3150(1)00(2) 0.22 8.5 14.5 18.0 15 400 53BI3220(1)00(2) R53BI3220(1)00(2) 0.33 10.0 16.0 18.0 15 400 53BI3330(1)00(2) R53BI3330(1)00(2) 0.39 11.0 19.0 18.0 15 400 53BI3390(1)00(2) R53BI3390(1)00(2) 0.47 11.0 19.0 18.0 15 400 53BI3470(1)00(2) R53BI3470(1)00(2) 1 13.0 22.0 26.5 22.5 200 53BN4100(1)00(2) R53BN4100(1)00(2) 1 13.0 22.0 32.0 27.5 150 53BR4100(1)00(2) R53BR4100(1)00(2) 10 30.0 45.0 42.0 37.5 100 53BW5100(1)00(2) R53BW5100(1)00(2) 15 30.0 45.0 57.5 52.5 50 53BY5150(1)00(2) R53BY5150(1)00(2) 18 35.0 50.0 57.5 52.5 50 53BY5180(1)00(2) R53BY5180(1)00(2) 20 35.0 50.0 57.5 52.5 50 53BY5200(1)00(2) R53BY5200(1)00(2) Capacitance Value (µF) T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Legacy Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options.

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder material. This has increased the liquidus temperature from 183°C for SnPb eutectic alloys to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre- heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm). Gr eat car e must be tak en during soldering. The r ecommended solder pr ofiles fr om KEME T should be used. Consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. See Figure 1. Reflow soldering is not r ecommended for thr ough-hole film capacit ors. Exposing capacit ors t o a soldering pr ofile in ex cess of the abov e-recommended limits may result to degradation of or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert thr ough-hole par ts after curing sur face mount par ts. Consult KEME T t o discuss the actual temper ature pr ofile in the o ven, if thr ough-hole components must pass thr ough the adhesiv e curing pr ocess. A maximum two soldering cy cles is recommended. Allow time for the capacit or surface temperature to return to normal temperature before performing the second soldering cycle. Manual Soldering Recommendations Following is the recommendation for manual soldering with a soldering iron. The soldering iron tip temperature should be set at 350°C (+10°C maximum), with the soldering dur ation not t o ex ceed mor e than 3 seconds. Recommended Soldering Temperature 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 Soldering Time (seconds) Soldering Iron Bit Temperature (°C) Wave Soldering Recommendations 100 150 200 250 300 0 40 80 120 160 200 240 Temperature (°C) Time (seconds) Cooling 2+3 seconds max260°C First Wave Second Wave ∆ T < 150°C ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Preheating Tpreheat Typical

12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temper ature of the soldering pr ocess. Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Pitch ≤ 1 5 m m Capacitor Pitch > 15 mm Capacitor Pitch ≤ 1 5 m m Capacitor Pitch > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 125°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temper ature measur ed inside the capacit or: set the temper ature so that the maximum temper ature inside the element is below the limit. Dielectric Film Material Maximum Temperature Measured Inside the Element Polyester 160°C Polypropylene 125°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a v ariation of r eflow soldering. In this method, the printed cir cuit boar d with thr ough-hole components t o be solder ed is pr eheated and tr ansported o ver the solder bath as it is in normal flow soldering, without touching the solder . When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten solder, only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temper ature pr ofile for selectiv e soldering is similar t o the double wa ve flow soldering outlined in this document. Howev er, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of overheating is gr eater than in double wa ve flow soldering, and gr eat car e must be tak en so that the par ts do not o verheat.

13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) Vibration MIL-SDT-202 Method 204

5 G for 20 minutes, 12 cycles each of 3 orientations

Use 8"X5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacit or body has t o be pr operly fix ed (e.g. clamped or glued). Construction Detailed Cross Section Self-Extinguishing Resin Molded Plastic Case Molded Plastic Case Leads Metal Contact Layer Metal Contact Layer Margin Single-sided Metallized Polypropylene Film (Second Layer) Single-sided Metallized Polypropylene Film (First Layer) Margin Single-sided Metallized Polypropylene Film FILM WINDING SCHEME OPTIONS

1 Section

Single-sided Metallized Polypropylene Film

2 Sections

3 Sections 4 Sections

Double-sided Metallized Polyester Film

3 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Film

4 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Polypropylene Film Dielectric Sulfide Film (SMR) Metallized Impregnated Paper Metallized Impregnated Paper Single-sided Metallized Polyester Film Single-sided Metallized Polyester Film Polypropylene Film Dielec- tric AXIAL - Polypropylene Film/Foil AXIAL - Single-sided Metallized Polypropylene Film Single-sided Metallized Polyester Film AXIAL - Single-sided Metallized Polyester Film AXIAL - Double-sided Metallized Polyester Film Winding Scheme

14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Construction cont. Detailed Cross Section Self-Extinguishing Resin Molded Plastic Case Molded Plastic Case Leads Metal Contact Layer Metal Contact Layer Margin Single-sided Metallized Polypropylene Film (Second Layer) Single-sided Metallized Polypropylene Film (First Layer) Margin Single-sided Metallized Polypropylene Film FILM WINDING SCHEME OPTIONS Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Film Film DielectricDouble-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Film Film DielectricDouble-sided Metallized Polyester Carrier Film Polypropylene Film Dielectric Sulfide Film (SMR) Metallized Impregnated Paper Metallized Impregnated Paper Single-sided Metallized Polyester Film Single-sided Metallized Polyester Film Polypropylene Film Dielec- tric AXIAL - Polypropylene Film/Foil AXIAL - Single-sided Metallized Polypropylene Film Single-sided Metallized Polyester Film AXIAL - Single-sided Metallized Polyester Film AXIAL - Double-sided Metallized Polyester Film Winding Scheme

15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Marking IEC Climatic Category Approval Marks TOPFRONT Manufacturer’s Logo Manufacturing Plant Capacitance Tolerance Date Code Capacitance, Rated Voltage Series, Safety Class, Self Healing Passive Flammability Category B NOTE: Hot imprinting with or without color or ink jet or laser marking Parallel Construction Part Numbers: Lead Spacing 15 mm, 22.5 mm, and 27.5 mm IEC Climatic Category Approval Marks FRONT Manufacturer’s Logo Manufacturing Plant Date Code Capacitance, Rated Voltage Series, Safety Class, Self Healing Passive Flammability Category B IEC Climatic Category Approval Marks TOPFRONT Series Capacitance, Capacitance Tolerance, Rated Voltage Manufacturing Plant Manufacturer’s Logo Safety Class Self Healing Date Code TOP Capacitance Tolerance Passive Flammability Category B Parallel Construction Part Numbers: Lead Spacing 27.5 mm (alternatives*), 37.5 mm and 52.5 mm NOTE: Hot imprinting with or without color or ink jet or laser marking *Differences are caused by technology (clichee, laser, or ink) and production line. Series Construction Part Numbers: Lead Spacing 15 mm, 22.5 mm, and 27.5 mm IEC Climatic Category Approval Marks TOPFRONT Series Capacitance, Capacitance Tolerance, Rated Voltage Manufacturing Plant Manufacturer’s Logo Safety Class Self Healing Date CodePassive Flammability Category B Series Construction Part Numbers: Lead Spacing 27.5 mm (alternatives*), 37.5 mm and 52.5 mm *Differences are caused by technology (clichee, laser, or ink) and production line. Manufacturing Date Code (IEC–60062) Year Code Year Code Month Code Month Code

2010 A 2020 M January 1 July 7

2011 B 2021 N February 2 August 8

2012 C 2022 P March 3 September 9

2013 D 2023 R April 4 October O

2014 E 2024 S May 5 November N

2015 F 2025 T June 6 December D

2016 H 2026 U

2017 J 2027 V

2018 K 2028 W

2019 L 2029 X

16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Marking cont. IEC Climatic Category Approval Marks TOPFRONT Manufacturer’s Logo Manufacturing Plant Capacitance Tolerance Date Code Capacitance, Rated Voltage Series, Safety Class, Self Healing Passive Flammability Category B NOTE: Hot imprinting with or without color or ink jet or laser marking Parallel Construction Part Numbers: Lead Spacing 15 mm, 22.5 mm, and 27.5 mm IEC Climatic Category Approval Marks FRONT Manufacturer’s Logo Manufacturing Plant Date Code Capacitance, Rated Voltage Series, Safety Class, Self Healing Passive Flammability Category B IEC Climatic Category Approval Marks TOPFRONT Series Capacitance, Capacitance Tolerance, Rated Voltage Manufacturing Plant Manufacturer’s Logo Safety Class Self Healing Date Code TOP Capacitance Tolerance Passive Flammability Category B Parallel Construction Part Numbers: Lead Spacing 27.5 mm (alternatives*), 37.5 mm and 52.5 mm NOTE: Hot imprinting with or without color or ink jet or laser marking *Differences are caused by technology (clichee, laser, or ink) and production line. Series Construction Part Numbers: Lead Spacing 15 mm, 22.5 mm, and 27.5 mm IEC Climatic Category Approval Marks TOPFRONT Series Capacitance, Capacitance Tolerance, Rated Voltage Manufacturing Plant Manufacturer’s Logo Safety Class Self Healing Date CodePassive Flammability Category B Series Construction Part Numbers: Lead Spacing 27.5 mm (alternatives*), 37.5 mm and 52.5 mm *Differences are caused by technology (clichee, laser, or ink) and production line. Manufacturing Date Code (IEC–60062) Year Code Year Code Month Code Month Code

17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped Pizza Lead and Packaging Code: 00 - JA - JB JE - JH JM 40 – 50 GY CK DQ BB 5 11 18 2,000 1,250 1,000 600 1,250 800 1,122 6 12 18 1,750 1,000 900 500 1,000 680 935 7.5 13.5 18 1,000 800 700 350 800 500 748 8.5 14.5 18 1,000 650 500 300 700 440 663 10 16 18 750 550 500 270 600 380 561 11 19 18 450 400 350 - 500 340 510 22.5 6 15 26.5 805 450 500 - 700 464 660 7 16 26.5 700 450 500 - 550 380 564 8.5 17 26.5 468 350 300 - 450 280 468 10 18.5 26.5 396 350 300 - 350 235 396 11 20 26.5 360 200 250 - 350 217 360 13 22 26.5 300 150 200 - 300 - 300 27.5 11 20 32 560 336 336 - 350 - 300 13 22 32 480 288 288 - 300 - 250 13 25 32 480 288 288 - - - 14 28 32 352 176 176 - - - 230 16 30 32 288 144 144 - - - 200 22 37 32 168 112 112 - - - 150 37.5 52.5

18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 – Lead Spacing 15 mm Figure 2 – Lead Spacing 22.5 & 27.5 mm P0 D0 t ∆h ∆h Ød W W1W0 F P P1 P2 P BA t A−B Taping Specification Description Symbol Dimensions (mm) Lead Space Tolerance15.0 22.5 27.5 Taping lead space P 25.4 38.1 38.1 ±1 Feed h ole l ead s pace * P0 12.7 12.7 12.7 ±0.2 * * Centering of the lead wire P1 5.2 7.8 5.3 ±0.7 Centering of the body P 2 12.7 19.05 19.05 ±1.3 Lead s pacing * Component alignment ∆h 0 0 0 ±2 Component deviation ∆p 0 0 0 ±1 Height of component from tape center H0**** 18.5 18.5 18.5 ±0.5 Carrier tape width W 18 18 18 +1/−0.5 Hold down tape width W 0 10 10 10 Minimum Hole position W1 9 9 9 ±0.5 Hold down tape position W 2 3 3 3 Maximum Feed hole diameter D 0 4 4 4 ±0.2 Total Tape thickness t 0.7 0.7 0.7 ±0.2 * Available also 15 mm. Maximum 1 mm on 20 lead spacing. * 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request. **** H 0 = 16.5 mm is available upon request.

19© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifi cations Dimensions (mm) H W T 360 340 59 Reel Specifi cations Reel Size Dimensions (mm) D H W Standard 355 30 55 MaximumLarge 500 25 D W H H T W

20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3 131_R53B_X2_350 • 1/11/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53B, THB Grade IIIB, Class X2, 350 VAC, 125°C (Automotive Grade) KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation.