R51E

R51E MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 26

Technical content

Datasheet sections

• 3 Shaft/Case Type SV02C Series p9

R51E.pdf Jan.11,2017

5'2& - F - 1#-$#02', 80"-313 12,!#1', 5# 1'2#'Mur2ž1A..roc&$o0 - !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R51E.pdf Jan.11,2017

(Part Number) 2Series 3Terminal Shape 5Rotor Hole Shape/Rotor Hole Size 4Total Resistance Expressed by three figures. The unit is ohm. The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex.) 7Packaging R00 A A01 103SV AE Product ID SV Rotary Position Sensor Code Series

01 High Rotational Life of SMD/Lead Dust-proof

03 SMD Dust-proof

02 Shaft/Case Type

C Connector Type* Code Total Resistance 103 10000Ω (=10kΩ) Code Rotor Shape/Rotor Hole Size AE D Hole/4.0mm Dia. BJ D Shaft/6.0mm Dia. 6Individual Specification Code Code Individual Specification Code A01 SMD Type Standard A01 Series SV01 SV03 SMD Type Standard ZB1SV02C Case Type Standard Code Packaging B00 Bulk B01 Bulk (SV02C Series) R00 Reel * Recommended Connector Housing: PHR-3 Contact: BPH-002T-P0.5S or SPH-002T-P0.5S R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

SMD/Lead Dust-proof Type 12mm Size SV03 Series 5.5 8.2 14.9 4-0.8±0.1 8.5±0.1 5.0 213 : Marking 12.0 3.0 +0.1 5.0 Dia.+0 -0.1 2-1.00 Dia.+0.05 -0.10 4.0 Dia.+0.1 2.1 0.6 11.0 #2 #1#3 0.2 1.0 (Tolerance: ±0.3 in mm) SV03A Cover Rotor #2 Terminal #3 Terminal #2 Terminal #1 Terminal Resin Substrate Resistive Element Wiper Construction

Features

1. High Durability: 300k cycles 2. Pb Free Soldering: 260°C 3. Operating Temperature: -40°C to +125°C 4. Rotational Rotor: Through Hole Type 5. Thin Type: 2.1mm 6. RoHS Compliant

Applications

1. Switch for white goods 2. Digital still camera 3. Switch for automotive 4. Car audio 5. Multi-function printer 6. Robot 7. Motor drive unit Part Number Total Resistance Value (k ohm) Linearity (%) Effective Rotational Angle Rotational Torque Rotational Life Rated Voltage R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

(Tolerance: ±0.1 in mm) 4-1.8 ø2.0 5.0±0.1 Standard Land Pattern 7.28.7 6.7 5.2 ø5.10±0.05 75°±1° R6.952.0 1.10±0.05 Standard Land Pattern ΔTR : ±20% Linearity: ±3% ΔTR : ±20% Linearity: ±3% ΔTR : ±10% Linearity: ±3% ΔTR : ±10% Linearity: ±3% ΔTR : ±20% Linearity: ±3% ΔTR : +5/-30% Linearity: ±3% ΔTR : ±20% Linearity: ±3% ΔTR : ±20% Linearity: ±3% ΔTR: Total Resistance Change Temperature Cycle (Thermal Shock) Humidity Vibration Shock Humidity Load Life High Temperature Exposure Low Temperature Exposure Rotational Life Characteristics R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

SV03 Series Specifications and Test Methods

9 Rotational Life

The adjustment rotor should be continuously rotated within ±160° of effective electrical rotational angle, at the rate of 3 cycles for 1 second for 300 thousands cycles under the condition of 25±2°C of temperature without loading. Then, the rotary position sensor should be kept in a dry box for 10±5 minutes. 8 Low Temp. Exposure The rotary position sensor should be stored in a chamber at a temperature of -40±3°C without loading for 1000±8 hours. After removing from the chamber, the rotary position sensor should be kept in a dry box for 1 to 2 hours. 7 High Temp. Exposure The rotary position sensor should be stored in a chamber at a temperature of 125±2°C without loading for 1000±8 hours. After removing from the chamber, the rotary position sensor should be kept in a dry box for 1 to 2 hours.

6 Humidity Load Life

Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of the rotary position sensor, 1.5 hours on and 0.5 hours off, for 1000±8 hours in total in a chamber at a temperature of 85±3°C and relative humidity of 85±5%. After removing from the chamber, the rotary position sensor should be kept in a dry box for 5±1/6 hours.

5 Shock

The following shock test should be applied to the rotary position sensor: Half sine wave with the peak acceleration 14,700m/s2 (1,500G) max. applied in each 3 times (total 18 times) in the 3 direction of x, y, and z with bidirectional. Then, the rotary position sensor should be kept in a dry box for 1 to 2 hours.

4 Vibration

The rotary position sensor should be log-sweeped by the sine oscillatory wave of the maximum amplitude 1.5mm, Acceleration 98m/s 2 (10G) under the condition of a vibrational frequency between 10Hz and 2kHz. In 1 cycle which is vibrated for each 20 minutes in the 3 direction of x, y, and z., 12 cycles should be applied during 12 hours in total. Then, the rotary position sensor should be kept in a dry box for 1 to 2 hours. 3 Humidity The rotary position sensor should be stored in a chamber at temperature of +85±3°C and relative humidity of 85±5% for 1000±8 hrs. After removing from the chamber, the rotary position sensor should be kept in a dry box for 24 +8/-0 hours.

2 Temperature Cycle

(Thermal Shock) The rotary position sensor should be subjected to Table 1 temperature for 5 cycles. Then, the rotary position sensor should be kept in a dry box for 24 +8/-0 hrs.

1 Linearity

Linearity should be specified a deviation with the below ideal straight line, between ±160° from the index point, which is 50% of output voltage. The ideal straight line has 100%/333.3° as taper and pass the above index point. Measurement is performed using the following measurement circuit, and the rotor should be rotated in a clockwise direction. No. Test MethodsItem Tests and measurements should be conducted under the conditions of 15 to 35°C of temperature, 25 to 75% of relative humidity, and 86 to 106 kpa of atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above-mentioned conditions, the tests and measurements should be conducted under the conditions of 25±2°C of temperature, 45 to 55% of relative humidity, and 86 to 106 kpa of atmospheric pressure. When the potentiometer is tested after soldering on PCB, it should be tested after being kept in a room (15 to 35°C, 25 to 75%RH) over 24 hours except "Resistance to soldering heat." Guarantee Limit for Linearity 100% 50% 100% / 333.3° -160° 0° +160° CWCCW Rotational Angle (°) Output Voltage Ratio (%) V (1-2) V (1-3) X100 GND (#1) Connection Impedance: 1M ohm min. DC5V (#3) Output (#2) 1Sequence -40±3 Shift Time 5 max. +125±3 Shift Time 5 max. Temperature (°C) Time (min.) Table 1: One cycle of temperature cycle R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

SMD/Lead Dust-proof Type 12mm Size SV01 Series

1. Excellent resistance materials and high reliability wiper achieves 1M cycles. 2. D formation thru-hole rotor enables selection of any kind of gear shape. 3. Ultra-thin size (2.1mm height) 4. Au plated terminals. 5. Operating Temperature: -40°C to +85°C 6. RoHS Compliant
2. Switch for white goods 2. Digital still camera 3. Switch for automotive 4. Car audio 5. Multi-function printer 6. Robot 7. Motor drive unit 5.5 8.2 14.9 4-0.8±0.1 8.5±0.1 5.0 : Marking 12.0 3.0 +0.1 5.0 Dia.+0 -0.1 2-1.00 Dia.+0.05 -0.10 4.0 Dia.+0.1 2.1 0.6 11.0 #2 #1#3 0.2 1.0 (Tolerance: ±0.3 in mm) SV01A #3 Terminal #2 Terminal #1 TerminalWiperResistive Element Resin Substrate Rotor #2 Terminal Cover Construction Part Number Total Resistance Value (k ohm) Linearity (%) Effective Rotational Angle Rotational Torque Rotational Life Rated Voltage R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

7.2 5.26.7 8.7 4-1.8 ø5.10±0.05 ø2.0 1.10 ±0.05 5.0±0.1 75°±1° R6.95 2.00 (Tolerance: ±0.1 in mm) Standard Land Pattern ΔTR : ±20% Linearity: ±3% ΔTR : ±20% Linearity: ±3% ΔTR : ±10% Linearity: ±3% ΔTR : ±10% Linearity: ±3% ΔTR : ±20% Linearity: ±3% ΔTR : +5/-30% Linearity: ±3% ΔTR : ±20% Linearity: ±3% ΔTR : ±20% Linearity: ±3% ΔTR: Total Resistance Change Temperature Cycle (Thermal Shock) Humidity Vibration Shock Humidity Load Life High Temperature Exposure Low Temperature Exposure Rotational Life Characteristics R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

SV01 Series Specifications and Test Methods 9 Rotational Life The adjustment rotor should be continuously rotated within ±160° of effective electrical rotational angle, at the rate of one cycle for 6 seconds for 1 Million cycles under the condition of +25±2°C of temperature without loading. 8 Low Temp. Exposure The rotary position sensor should be stored in a chamber at the temperature of -40±3°C without loading for 168±4 hours. After removing from the chamber, the rotary position sensor should be kept in a dry box for 24 +8/-0 hours. 7 High Temp. Exposure The rotary position sensor should be stored in a chamber at the temperature of +85±3°C without loading for 250±8 hours. After removing from the chamber, the rotary position sensor should be kept in a dry box for 24 +8/-0 hours. Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of the rotary position sensor, 1.5 hours on and 0.5 hours off, for 96±4 hours in total in a chamber at a temperature of +40±2°C and relative humidity of 90-95%. After removing from the chamber, the rotary position sensor should be kept in a dry box for 24 +8/-0 hours. The rotary position sensor should be tested under the condition of the peak acceleration 20G max. in half-sine wave and 5 shocks in each of 3 mutually perpendicular directions (total 15 shocks). Then, the rotary position sensor should be kept in a dry box for 1-2 hrs. The rotary position sensor should be tested under the condition of the amplitude of 1.5mm, the frequency range from 10 to 55Hz (should be traversed in approximately one minute) and 2 hours in each of 3 mutually perpendicular directions (total 6 hours). Then, the rotary position sensor should be kept in a dry box for 1-2 hrs. 3 Humidity The rotary position sensor should be stored in a chamber at temperature of +60±2°C and relative humidity of 90-95% for 250±8 hrs. After removing from the chamber, the rotary position sensor should be kept in a dry box for 24 +8/-0 hours. (Thermal Shock) The rotary position sensor should be subjected to Table 1 temperature for 5 cycles. Then, the rotary position sensor should be kept in a dry box for 24 +8/-0 hrs. Linearity should be specified a deviation with the below ideal straight line, between ±160° from the index point, which is 50% of output voltage. The ideal straight line has 100%/333.3° as taper and pass the above index point. Measurement is performed using the following measurement circuit, and the rotor should be rotated in a clockwise direction. No. Test MethodsItem Tests and measurements should be conducted under the conditions of 15 to 35°C of temperature, 25 to 75% of relative humidity, and 86 to 106 kpa of atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above-mentioned conditions, the tests and measurements should be conducted under the conditions of 25±2°C of temperature, 45 to 55% of relative humidity, and 86 to 106 kpa of atmospheric pressure. When the potentiometer is tested after soldering on PCB, it should be tested after being kept in a room (15 to 35°C, 25 to 75%RH) over 24 hours except "Resistance to soldering heat." Guarantee Limit for Linearity 100% 50% 100% / 333.3° -160° 0° +160° CWCCW Rotational Angle (°) Output Voltage Ratio (%) V (1-2) V (1-3) X100 GND (#1) Connection Impedance: 1M ohm min. DC5V (#3) Output (#2) 1Sequence -40±3 +25±2 5 max. +85±3 +25±2 5 max. Temperature (°C) Time (min.) Table 1: One cycle of temperature cycle R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Shaft/Case Type SV02C Series 7.0 13.0 8.5 30.0 14.0 16.5 13.6 1.0 ø3.0±0.1 2.0 (in mm) 2.0 M12 x1.0 (3)(2)(1) ø6.0+0.0/-0.1 4.5+0.0/-0.1 Marking 9.0±0.1 7.0 SV02C Shaft Case Terminal Wiper Resign Resistive Element Construction

1. High Durability: 1000k cycles 2. Operating Temperature: -20°C to +85°C 3. SV02C is fixed by a nut on sheet metal, not by solering. (Exclusive nut and washer are both included.) 4. Easy connection by a shaft structure, and by a connector for out-put voltage. 5. RoHS Compliant 6. Special out-put curve is available.
2. Switch for white goods 2. Pachinko steering wheel 3. Robot 4. Switch for Industrial equipment 5. Motor drive unit <Recommended Connector> Housing : PHR-3 Contact : BPH-002T-P0.5S or SPH-002T-P0.5S Part Number Total Resistance Value (k ohm) Absolute Linearity (%) Effective Rotational Angle Rotational Torque Rotational Life Rated Voltage SV02C103BJZB1 10 ±30% ±3 280° (Ref.) 4mN.m (Ref.:40gf.cm) 1M cycles 5Vdc Absolute Linearity: Based on the rotor position (Mechanical) R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

ΔTR : ±10% Absolute Linearity : ±4% ΔTR : ±10% Linearity : ±4% ΔTR : ±10% Linearity : ±4% ΔTR : +10% Linearity : ±4% ΔTR : ±10% Linearity : ±4% ΔTR : ±10% Linearity : ±4% ΔTR: Total Resistance Change Temperature Cycle (Thermal Shock) Vibration Humidity Load Life High Temperature Exposure Low Temperature Exposure Rotational Life R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

SV02C Series Specifications and Test Methods The adjustment rotor should be continuously rotated within ±160° of effective electrical rotational angle, at the rate of 3 cycles for 1 second for 300 thousands cycles under the condition of 25±2°C of temperature without loading. Then, the rotary position sensor should be kept in a dry box for 10±5 minutes. 8 Low Temp. Exposure The rotary position sensor should be stored in a chamber at a temperature of -40±3°C without loading for 1000±8 hours. After removing from the chamber, the rotary position sensor should be kept in a dry box for 1 to 2 hours. 7 High Temp. Exposure The rotary position sensor should be stored in a chamber at a temperature of 125±2°C without loading for 1000±8 hours. After removing from the chamber, the rotary position sensor should be kept in a dry box for 1 to 2 hours. Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of the rotary position sensor, 1.5 hours on and 0.5 hours off, for 1000±8 hours in total in a chamber at a temperature of 85±3°C and relative humidity of 85±5%. After removing from the chamber, the rotary position sensor should be kept in a dry box for 5±1/6 hours. The rotary position sensor should be log-sweeped by the sine oscillatory wave of the maximum amplitude 1.5mm, Acceleration 98m/s 2 (10G) under the condition of a vibrational frequency between 10Hz and 2kHz. In 1 cycle which is vibrated for each 20 minutes in the 3 direction of x, y, and z., 12 cycles should be applied during 12 hours in total. Then, the rotary position sensor should be kept in a dry box for 1 to 2 hours. (Thermal Shock) The rotary position sensor should be subjected to Table 1 temperature for 5 cycles. Then, the rotary position sensor should be kept in a dry box for 24 +8/-0 hrs.

1 Absolute Linearity

Linearity should be specified a deviation with straight line which has 100%/280° shown in Fig. 1. The guarantee range is ±130° from the index point shown in Fig. 1 and mechanical 0° position should be specified in Fig. 2. The measurement is performed using the measurement circuit shown in Fig. 3. Fig. 1 Fig. 3 Fig. 2 No. Test MethodsItem Tests and measurements should be conducted under the conditions of 15 to 35°C of temperature, 25 to 75% of relative humidity, and 86 to 106 kpa of atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above-mentioned conditions, the tests and measurements should be conducted under the conditions of 25±2°C of temperature, 45 to 55% of relative humidity, and 86 to 106 kpa of atmospheric pressure. When the potentiometer is tested after soldering on PCB, it should be tested after being kept in a room (15 to 35°C, 25 to 75%RH) over 24 hours except "Resistance to soldering heat." GND (#1) Connection Impedance: 1M ohm min. DC5V (#3) Output (#2) Guaranteed Range 100% 50% -130 0 130 -140 140 Angle (°) Output Voltage Ratio (%) V (1-2) V (1-3) X100 0° (Shaft position) 1Sequence -40±3 +85±3 Temperature (°C) Time (min.) Table 1: One cycle of temperature cycle R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Notice (Operating and Storage Conditions) 1. Store at temperatures of -10 to +40°C and relative humidity of 30-85%. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. Do not use the rotary position sensor under the following environmental conditions. If you use the rotary position sensor in an environment other than listed below, please consult a Murata factory representative prior to using. (1) Corrosive gasses atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Water, Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Soldering and Mounting) Continued on the following page. R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1. Soldering (1) SV series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) The dimension of the land pattern used should be Murata's standard land pattern at reflow soldering. Excessive land area may cause displacement due to the effect of the surface tension of the solder. Insufficient land area may cause insufficient soldering strength on PCB (SMD Type). (3) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the rotary position sensor may deviate from the specified characteristics. (4) The amount of solder is critical. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals. (5) The soldering iron should not come in contact with the cover of the rotary position sensor. If such contact does occur, the rotary position sensor may be damaged. 2. Mounting (1) Do not apply excessive force, preferable 9.8N max. (Ref. 1kgf) when the rotary position sensor is mounted to the PCB. (2) Do not warp and/or bend PCB to prevent the rotary position sensor from breakage. 3. Cleaning Cannot be cleaned because of open construction.

Continued from the preceding page. Standard Profile Pre-heating Heating Time°C Series SV Temp. (T1) Time (t1) sec. Temp. (T2) Time (t2) sec. Pre-heating Heating Time°C Temp. (T1) Time (t1) sec. Temp. (T4) Time (t3) sec. Limit Profile 2245±3150 to 180 60 to 120 220 30 to 60 2260 +5/-0150 to 180 60 to 120 230 30 to 50 Standard Condition Temperature of Soldering Iron Tip Soldering Time sec. Soldering Iron Power Output W 350±10 3 max. 30 max. 1 Cycle of Soldering Iron Time Cycle of Reflow Cycle of Reflow Peak Temperature (T3) Peak Temperature (T5) Standard Profile Pre-heating Heating Time°C Series SV Temp. (T1) Time (t1) sec. Temp. (T2) Time (t2) sec. Series SV 1230150 60 to 120 183 30 Cycle of Reflow Peak Temperature (T3) 1. Soldering profile for Lead-free solder (96.5Sn/3.0Ag/0.5Cu) o Reflow Soldering Profile Temperature (°C) t3 Time (s)t1 Limit Profile Standard Profile 2. Soldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to 1) Temperature (°C) Time (s) Standard Profile T1 t2 o Soldering Iron Soldering Profile Notice (Handling) Uncontrolled mechanical force (except usual rotation on the hollow rotor of product) may cause a change of electrical characteristics, an increase of rotational torque or mechanical damage of the product. Therefore, please consider the following points for your design. 1. The product must be soldered by the terminals. Do not affix by screw clamping to the support board as this could cause mechanical deformation. 2. The connecting shaft must be sustained by the bearing. No uncontrolled force should be applied to the hollow rotor. Notice (Other) R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1. Please make sure the connecting impedance is not less than 1M ohm. The rotary position sensor is designed to connect the output terminal and A/D port of the microprocessor directly. Therefore, connecting impedance presupposes certain M ohm and the contact resistance is set high. 2. To minimize processing errors and rare cases of noise influence when data is installed, please consider the following when programming your software. (1) Data install should be done multiple times and applied the mean value. (2) Data considered as error should be invalid. (3) If suspicious data is found, the data should be re-installed. 3. Before using the rotary position sensor, please test after assembly in your particular mass production system. 4. MURATA cannot guarantee rotary position sensor integrity when used under conditions other than those specified in this document.

Minimum Quantity (pcs.) SV01A103AEA01 SV03A103AEA01 SV02C103BJZB1 ø180mm Reel 1000 1000 ø330mm Reel Ammo Pack Magazine 750 Bulk Tray Minimum Quantity (in mm) 13.0±0.5 Dia. 21.0±0.8 Dia. 2.0±0.5 330±2 Dia. 25.5±1.0 80±1 Dia. 29.5±1.0 Dimensions of Reel (Tolerance: ±0.1 in mm) a 2.0±0.05 Tape feeding direction 4.0 16.0 11.4 11.5 24.0 16.3 1.75 Across a-a' 0.4±0.05 3.5 1.5 -0 Dia.+0.1 Dimensions of Plastic Tape R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1. Storage F H}J2-0%##0'-" 31@ .0- *#+.0'-02-31#@ 2. Board Design SV Series Application Manual @| ‚@ ~Q{@‚ @z 2,"0","22#0, ',++J

R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual (2) Locating Holes on Print Circuit Board The mounting position of the product is determined by the holes in the following three places. [1] Center position (X-and Y-directions) is determined by Hole (one location) for boss at rear of product. [2] Rotation angle (θ angle) is determined by hole(s) for locating pins at rear of product. (θ-angle can be fixed by one hole or two holes.) Determine the dimension of the locating holes as follows, depending upon the method of mounting the product (when mounting the product using a mounter or mounting it by hand). [1] When mounting the product by hand Please refer to right drawing [2] When using a mounter Expand the size of each hole to account for the accuracy of the mounts. Note, however, that the accuracy of the mounting position of the product is determined by the "accuracy of the mounter." 5.5 8.2 14.9 4-0.8±0.1 8.5±0.1 5.0 (Tolerance: ±0.3 in mm) Locating Pins Boss (Tolerance: ±0.1 in mm)75°±1° R6.95 1.10±0.05 2.0 ø5.10±0.05 ø2.0 Continued on the following page. Continued from the preceding page.

R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual 3. Circuit Design (1) Recommended Circuit '%@{@ ,-2&#0 4-*2%#@ F A/D 0-"3!2 A/D 0-"3!2 A/D0-"3!2 '6#"#1'12-0 '6#"#1'12-0 '%@{ '%@|

R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual 4. Mechanical Design (1) Cross-section dimension of the shaft inserted into the rotor rotor of the product greatly affects the characteristics of the product. F cause a delay in the change in the output voltage accompanying the rotation of the shaft. F F 5. System Design (1) Precautions for Loading Data mean value. loading failures. K}M carrying out a data acquisition operation once again. 6. Mounting the Product on a Printed Circuit Board and Soldering It (1) Quantity of solder paste on SMD products is 150μm. F ,-0+*-32.324-*2%#@ Continued from the preceding page.

R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual (2) Applicable mounter +,3$!230#01@J 0"3*!--*',% (in air) 100 150 200 250 300 #+.#0230#H°C) 150 to 180°C 220°C Name of Manufacturer Nozzle Part No./Series Name/Drawing No.Model Name Nozzle Shape Suction Position ~zp CM602 #0'#1 #0'#1 YV100X {zz YV88X {zz YS100 YS88 Q|z€z Q|zz #0'#1 Qzzz#0'#1 Q {zz M6e M6e A 10807GK823 10807GK823 ‚QQzzz {{‚}Qzzz {|‚}Qzzz {z‚}Qzzz {{|Qzzz {||Qzzz {z|Qzzz +&-2-0-@A2"@ ,1-,'! +&-2-0-@A2"@ -0.-02'-, '2!&' 'Q -@A2"@

R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual (1) Quantity of Solder 1-*"#0',%'0-, }”1&',% (2) Soldering Iron "+%#"@ F Bǎ}+++6@ B}z+6@ -*"#0',%2'+# Wattage of iron 7. Connecting the Product to a Mechanical Part F .0-"3!2@ 0-2-0@ Š}#0+',* Š|#0+',* #1',3 1202# Rotor Š|#0+',* -4#0

R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual 8. Examples of Actual Problems and Preventive Measures Because this product has been designed with emphasis on miniaturization and low weight, the bearing is not intended to support a load. For this reason, please provide a separate bearing function to ensure that an excessively high load is not applied to the bearing of the product. If a load is applied to the bearing in the radial or thrust direction, the bearing may wear, resulting in the following problems. [1] Deterioration of output voltage linearity due to backlash in the rotor [2] Deterioration of the contact condition of the contacts due to wear dust Also, be sure to carry out an evaluation using an actual machine. The rotational life of this product has been increased by appropriate selection of materials, processing method, and so on, without relying on lubricants. Consequently, if grease or other lubricant gets into the product, problems are likely to occur. This product is not of a sealed construction, so lubricant may flow into it from the bearing or gaps in the case, for example. When it is unavoidably necessary to coat a gear, or other part, that you use with grease, or another lubricant, take the following precautions to prevent grease from getting into the product. [1] Use a high viscosity lubricant [2] Do not allow lubricant to get onto the shaft that is to be connected to the product. (In the case of a shaft that is integral with the gear, apply lubricant only to the gear teeth.) 1. Do not apply a load other than rotational motion to the bearing. 2. Do not allow grease or other lubricant to get into the product. This product has increased contact resistance (sliding noise) in order to maximize its rotational life. Consequently, in order to reduce the effect of sliding noise, it is necessary to reduce the current flowing through the contacts (current i indicated in the figure at right) as far as possible. Accordingly, take steps to ensure that the internal impedance of the circuit connected to the output terminal (#2 terminal) is at least 1MΩ. Be particularly careful in the case of the filter circuit shown in the figure at right. 3. Ensure that the connection impedance is at least 1MΩ. Do not rheostat connect as shown in the figure at right because the contact resistance is slightly high. #3 Terminal #2 Terminal #1 TerminalWiperResistive Element Resin Substrate Rotor #2 Terminal Cover Bearing Product Do not apply grease to shaft. Apply lubricant only to gear teeth. A/D Product i Continued on the following page. Continued from the preceding page.

R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual This product is not of a sealed construction, so the contacts and resistive element inside it are exposed directly to the ambient air. For this reason, if the product is used in an atmosphere containing a corrosive gas, the contacts and resistive element may corrode. When it is unavoidably necessary to use the product in an atmosphere containing a corrosive gas, install the product in a sealed structure. When combining a mechanical part with the product, ensure that the center of the product rotor hole coincides with the center of the shaft to be inserted into the rotor. If you use these parts in a misaligned condition, the bearing may wear, resulting in the following problems. [1] Deterioration of output voltage linearity due to play in the rotor [2] Deterioration of the contact condition of the contacts due to wear dust The graph at right shows the results of measuring the output voltage linearity of the same sample when the impedance to which it is connected is changed between 1MΩ and 200kΩ. It can be seen that the effect of sliding noise is reduced when the connection impedance is increased. 4. When using the product in an atmosphere containing a corrosive gas (chlorine, sulfur, etc.), install it in a sealed structure. 5. Ensure that the positions of the mechanical part (shaft) that you wish to connect to the product and the product rotor hole do not become misaligned. Graph 1 When the connection impedance is 1MΩ Linearity (V) 630 640 3.3 3.4 3.5 3.6 3.7 3.8 3.9 650 660 670 680 690 700 Graph 2 When the connection impedance is 200kΩLinearity (V) 630 640 3.6 3.7 3.8 3.9 4.0 4.1 4.2 650 660 670 680 690 700 Continued from the preceding page.

R51E.pdf Jan.11,2017 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Qualified Standards MURATA FACTORY Qualified Date Standard Qualified Number Wuxi Murata Electronis Co.,Ltd. May 12, 1999 UNDERWRITERS LABORATORIES INC. A7924 The products listed here have been produced by the ISO9001 and ISO/TS16949 certified factory. * No ODCs (Ozone Depleting Chemicals) are used on any of Murata's Rotary Position Sensors. Qualified Standards

Murata Manufacturing Co., Ltd. www.murata.com Note

1 Export Control

For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specifi ed by the law is required for export.

2 Please contact our sales representatives or

product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party’ s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog.

1 Aircraft equipment

2 Aerospace equipment

3 Undersea equipment

4 Power plant equipment

5 Medical equipment

6 Transportation equipment (vehicles, trains,

ships, etc.)

7 Traffi c signal equipment

8 Disaster prevention / crime prevention

9 Data-processing equipment

reliability requirements to the applications listed above

3 Product specifi cations in this catalog are as of

June 2016. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers.

4 Please read rating and CAUTION (for storage,

operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

6 Please note that unless otherwise specifi ed, we

shall assume no responsibility whatsoever for any confl ict or dispute that may occur in connection with the eff ect of our and/or a third party’ s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the eff ect that any third parties are authorized to use the rights mentioned above under licenses without our consent.

7 No ozone depleting substances (ODS) under the

Montreal Protocol are used in our manufacturing process. Global Locations For details please visit www.murata.com Cat. No. R51E-4 R51E.pdf Jan.11,2017