600R150ZR LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

Applications

to"IPMEDVSSFOU range, 60VDC operating voltage t7"$JOUFSSVQUSBUJOH t'BTUUJNFoUPUSJQ t#JOOFEBOETPSUFEOBSSPX resistance ranges available t3P)4DPNQMJBOU -FBEo Free and Halogen-Free* Secondary overcurrent protection for: t$FOUSBM0GmDF Equipment (CO) t$VTUPNFS1SFNJTFT Equipment (CE) t"MBSNTZTUFNT t4FU5PQ#PYFT 45# t7PJDFPWFS*1 70*1 t4VCTDSJCFS-JOF*OUFSGBDF Circuit (SLIC) 600R Series Agency Approvals AGENCY AGENCY FILE NUMBER E183209 R50120008 I hold = Hold current: maximum current device will pass without tripping in 23°C still air. I trip = Trip current: minimum current at which the device will trip in 23°C still air. Vint = Maximum voltage the device can withstand without damage at rated current (I max) Vop= The device regular operation voltage I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) P d = Power dissipated from device when in the tripped state at 23°C still air. R min = Minimum resistance of device in initial (un-soldered) state. R typ = Typical resistance of device in initial (un-soldered) state. R 1max = Maximum resistance of device at 20°C measured one hour after tripping. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. * Effective February 11, 2010 onward, all 600R PTC products will be manufactured Halogen Free (HF). Existing Non-Halogen Free 600R PTC products may continue to be sold, until supplies are depleted. This change will have no effect on 600R product specifications or performance.

Revised: July 12, 2010 POL YFUSE® Resettable PTCs © 2010 Littelfuse, Inc.600R Series Radial Leaded > 600R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/600R.html for current information. T emperature Rerating Curve -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 10% 30% 50% 70% 90% 110% 130% 150% 170% Temperature (°C) Percentage of Rated Current Average Time Current Curves Part Number Lightning Power Cross 600R150 600R160 TIA-968-A – 1 .5kV 10/160μs 800V 10/560μs Telcordia GR 1089 – 1 .0kV 10/1000μs 2.5kV 2/10μs UL60950, 3rd Ed – 600Vac, 40A Telcordia GR – 1089 – 600Vac, 60A Devices should be independently evaluated and tested for use in any specific application Agency Specification Selection Guide For T elecom and Networking Applications The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. Ambient Operation Temperature Part Number Hold Current (A) T emperature Rerating 0.1 1 10 100 Current in Amperes 0.1 10000 1000 100 0.15 A 0.16 A 100000 600R Time in Seconds

Revised: July 12, 2010 POL YFUSE® Resettable PTCs © 2010 Littelfuse, Inc 600R Series Radial Leaded > 600R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/600R.html for current information. 600R Series Soldering Parameters - Wave Soldering Condition Wave Soldering Peak Temp/ Duration Time 260°C

5 Sec

220°C 2 Sec ~ 20 Sec Preheat 140°C~ 180°C 180 Sec ~ 210 Sec Storage Condition 0°C~35°C, 70%RH t3FDPNNFOEFETPMEFSJOHNFUIPETIFBUFMFNFOUPWFOPS N2 environment for lead–free t%FWJDFTBSFEFTJHOFEUPCFXBWFTPMEFSFEUPUIFCPUUPN side of the board. t%FWJDFTDBOCFDMFBOFEVTJOHTUBOEBSEJOEVTUSZNFUIPET and solvents. t5IJTQSPmMFDBOCFVTFEGPSMFBEGSFFEFWJDF Note: If soldering temperatures exceed the recommended profile, devices may not meet the performance requirements. Preheating 160 190 220 260 2 to 5 Temperature (°C) Soldering Cooling 20-30180 to 210 Time(s) Protection Application Guide Region/Specification Application Device Selection North America Telcordia GR-1089 *Access network equipment Remote terminal Repeaters WAN equipment Cross -connect 600R150 600R160 North America TIA-968-A, UL60950 Customer and IT equipment Analog modems ADSL, XDSL modems Phone sets, PBX systems Internet appliances POS terminals 600R150 600R160 North America Telcordia GR-1089 Central Office POTS/ISDN linecards T1/E1/J1 linecards ADSL/VDSL splitters CSU/DSU 600R150 600R160 North America Telcordia GR-1089 *Intrabuilding communication systems LAN, VOIP cards Local loop handsets 600R150 600R160South America/Asia/Europe ITU K.20 and K.21 *Resistance binned parts are recommended

Revised: July 12, 2010 POL YFUSE® Resettable PTCs © 2010 Littelfuse, Inc.600R Series Radial Leaded > 600R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/600R.html for current information. Part Ordering Number System R: RADIAL I HOLD CURRENT CODE (SEE TABLE BELOW)

600 R 160 - RA F

QUANTITY CODE: F=200 U=500 Z = 600 SERIES PEAK VOLTAGE RATING Rx: Resistance Range (x = A-Z or 1-9) [not applicable for all PACKAGING STYLE BLANK: Bulk R: Tape & Ammo Environmental Specifications Operating/Storage T emperature -40°C to +85°C Maximum Device Surface T emperature in T ripped State 125°C Passive Aging 85°C/85°C, 1000 hours Humidity Aging +85°C, 85% R.H.,1000 hours Thermal Shock MIL–STD–202F , Method 107G +125°C to -55°C 10 times Solvent Resistance MIL–STD–202, Method 215F Physical Specifications Lead Material Tin-plated Copper Soldering Characteristics Solderability per MIL–STD–202, Method 208E Insulating Material Cured, flame retardant epoxy polymer meets UL94V-0 requirements. Device Labeling Marked with ‘LF’, voltage, current rating, and date code. Soldering Parameters - Solder Reflow Condition Reflow Peak Temp/ Duration Time 260°C > 5 Sec > 220°C 30 Sec ~ 60 Sec Preheat 160°C~ 190°C 60 Sec ~ 90 Sec Storage Condition 0°C~35°C, 70%RH t3FDPNNFOEFESFnPXNFUIPET*3 WBQPSQIBTFPWFO IPU air oven, N2 environment for lead-free. t%FWJDFTBSFOPUEFTJHOFEUPCFXBWFTPMEFSFEUPUIF bottom side of the board. t%FWJDFTDBOCFDMFBOFEVTJOHTUBOEBSEJOEVTUSZNFUIPET and solvents. Note: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. Preheating 160 190 220 260 30 to 60 Temperature (°C) Soldering Cooling 12060 to 90 Time(s)

Revised: July 12, 2010 POL YFUSE® Resettable PTCs © 2010 Littelfuse, Inc 600R Series Radial Leaded > 600R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/600R.html for current information. 600R Series Dimensions B A E D C F Part Number A B C D E Physical Characteristics Inches mm Inches mm Inches mm Inches mm Inches mm Lead (dia) Material Device dimensions through February 10, 2010* Device dimensions after February 11, 2010* Packaging Part Marking System Part Number Ordering Number I hold (A) I hold Code Packaging Option Quantity Quantity & Packaging Codes 600R150 600R150F 0.15 150 Bulk 200 F 600R150ZR Tape and Ammo 600 ZR 600R150-RA 600R150-RAF 0.15 150 Bulk 200 F 600R150-RAZR Tape and Ammo 600 ZR 600R150-RB 600R150-RBF 0.15 150 Bulk 200 F 600R150-RBZR Tape and Ammo 600 ZR 600R160 600R160F 0.16 160 Bulk 200 F 600R160UR Tape and Ammo 500 UR 600R160-RA 600R160-RAF 0.16 160 Bulk 200 F 600R160-RAUR Tape and Ammo 500 UR 600R160-R1 600R160-R1F 0.16 160 Bulk 200 F 600R160-R1UR Tape and Ammo 500 UR 600 150 XXXX Voltage Rating Current Rating Date Code (Contact Littelfuse for additional information) Littelfuse Trademark * Littelfuse will be changing the form dimensions of 600R series devices. Effective Febraury 11, 2010, all 600R series devices will be manufactured using the smaller dimensions listed. This change affects dimensions only, and will have no effect on electrical specification, quality or performance.

Revised: July 12, 2010 POL YFUSE® Resettable PTCs © 2010 Littelfuse, Inc.600R Series Radial Leaded > 600R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/600R.html for current information. Dimension EIA Mark IEC Mark Dimensions Dim. (mm) T ol. (mm) Carrier tape width WW 18 -0.5 / +1 .0 Hold down tape width: W4 W0 11 min. Top distance between tape edges W6 W2 3 max. Sprocket hole position W5 W1 9 -0.5 / +0.75 Sprocket hole diameter* D0 D0 4 -0.32 / +0.2 Abscissa to plane(straight lead) HH 18.5 -/+ 3.0 Abscissa to plane(kinked lead) H0 H0 16 -/+ 0.5 Abscissa to top H1 H1 32.2 max. Overall width w/o lead protrusion C1 42.5 max. Overall width w/ lead protrusion C2 43.2 max. Lead protrusion L1 l1 1 .0 max. Protrusion of cut out LL 11 max. Protrusion beyond hold-down tape l2 l2 Not specified Sprocket hole pitch: 600R150 & 600R160 P0 P0 25.4 -/+ 0.5 Device pitch: 600R150 & 600R160 25.4 Pitch tolerance 20 consecutive. -/+ 1 Tape thickness tt 0.9 max. Tape thickness with splice t1 2.0 max. Splice sprocket hole alignment 0 -/+ 0.3 Body lateral deviation Δh Δh 0 -/+ 1 .0 Body tape plane deviation Δp Δp 0 -/+ 1 .3 Ordinate to adjacent component lead* P1 P1 3.81 -/+ 0.7 Lead spacing FF 5.08 -/+ 0.8 T ape and Ammo Specifications Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details. *Differs from EIA Specification T ape and Ammo Diagram A B L1 P0 D0 F L W Reference plane Δh Δh H Δh Δp Direction of unreeling Cross section A - B t Figure 1