R463F322000H2M

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 18

Technical content

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

• A pprovals: ENEC, UL, cUL, CQC X

2 CLASS (IEC 60384-14)

R ated voltage: 310 VAC 50/60 Hz C apacitance range: 0.01 – 15 µF L ead spacing: 10.0 – 37.5 mm

• C apacitance tolerance: ±20%, ±10% C limatic category 40/125/56, IEC 60068-1 T ape & Reel in accordance with IEC 60286-2 R oHS compliant and lead-free terminations
• Operating temperature range of −40°C to +125°C 00% screening factory test at 2,200 VDC/1,500 VAC
• S elf healing properties Overview The R46 series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the r equirements of UL 94 V–0.

Applications

For worldwide use in electromagnetic interference (EMI) suppression in across-the-line applications that require X2 safety classification. Intended for use in situations in which capacit or failure would not result in exposure to electric shock. Not for use in " series with mains" type applications. Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Part Number System R46 3 N 3220 00 H1 M Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Packaging Internal Use Capacitance Tolerance X2, Metallized Polypropylene 3 = 310 F = 10.0 I = 15.0 N = 22.5 R = 27.5 W = 37.5 The last three digits represent significant figures. T he first digit s pecifies number o f zeros to be ad ded. See Ordering Options Table H = High Temperature K = ±10% M = ±20%

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 22.5 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4+2/−0 00 Ammo Pack H0= 18.5 ±0.5 DQ1 Other Lead and Packaging Options Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK Tape & Reel (Standard Reel) H0= 18.5 ±0.5 GY1 Bulk (Bag)2 – Short Leads 2.7 +0.5/−0 JA Bulk (Bag)2 – Short Leads 3.5 + 0.5/−0 JB Bulk (Bag)2 – Short Leads 4.0 +0.5/−0 JE Bulk (Bag)2 – Short Leads 3.2 + 0.3/−0.2 JH Bulk (Bag) – Long Leads 18 ±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 27.5 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4+2/−0 00 Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK1 Other Lead and Packaging Options Bulk (Tray) – Short Leads 2.7 +0.5/−0 JA Bulk (Tray) – Short Leads 3.5 + 0.5/−0 JB Bulk (Tray) – Short Leads 4.0 +0.5/−0 JE Bulk (Tray )– Short Leads 3.2 + 0.3/−0.2 JH Bulk (Tray) – Long Leads 18 ±1 JM Bulk (Tray) – Long Leads 30 +5/−0 40 Bulk (Tray) – Long Leads 25 +2/−1 50 37.5 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4+2/−0 00 Other Lead and Packaging Options Bulk (Tray) – Short Leads 2.7 +0.5/−0 JA Bulk (Tray) – Short Leads 3.5 + 0.5/−0 JB Bulk (Tray) – Short Leads 4.0 +0.5/−0 JE Bulk (Tray )– Short Leads 3.2 + 0.3/−0.2 JH Bulk (Tray) – Long Leads 18 ±1 JM Bulk (Tray) – Long Leads 30 +5/−0 40 Bulk (Tray) – Long Leads 25 +2/−1 50 1 Not for all sizes, see "Packaging Quantities" table. 2 For lead spacing 22.5 case sizes ≥ 8.5*17*26.5 the parts are packed in a Pizza box 335*320*34 mm

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Dimensions – Millimeters F L T H LL S FRONT VIEW SIDE VIEW S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Note: See Ordering Options Table for lead length (LL/H 0) options.

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Performance Characteristics * Typical value Dielectric Polypropylene fi lm Plates Metal layer deposited by evaporation under vacuum Winding Non-inductive type Leads Tinned wire Protection Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Related Documents IEC 60384–14, EN 60384–14 Rated Voltage V R 310 VAC (50/60 Hz) Recommended DC Voltage ≤ 630 VDC Capacitance Range 0.010 – 15 µF Capacitance Values E6 series (IEC 60063) measured at kHz and +20 ±1°C Capacitance Tolerance ±10%, ±20% Temperature Range −40°C to +125°C Climatic Category 40/125/56 IEC 60068-1 Reliability Operational life 100,000 hours at 85°C; 2,000 hours at 125°C Storage Conditions Storage time: months from the date marked on the label package Average relative humidity per year 70% RH 85% for days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Approvals ENEC, UL, cUL, CQC Dissipation Factor (tanδ) Maximum Values at +23°C C 0.1 μF C 0.1 μF Frequency = 1 kHz 0.3% 0.2% Test Voltage Between Terminals The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC. The voltage level is selected to meet the requirements in applicable equipment standards. A ll electrical characteristics are checked after the test. This test cannot be repeated, as there is a risk of damaging the capacitor. KEMET is not liable in such cases for any failures. Insulation Resistance Measured at +25°C ±5°C, according to IEC 60384–2 Minimum Values Between Terminals Voltage Charge Voltage Charge Time C 0.33 μF C 0.33 μF

100 VDC 1 minute ≥ 1 • 105 MΩ

( ≥ 5 • 105 MΩ )* ≥ 30,000 MΩ • µF

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Performance Characteristics cont. 100 −40 −20 0 20 40 60 80 Temperature (°C) Maximum Humidity in Storage Condition Relative Humidity (%)

30 Days

Maximum Irms vs. Th Maximum Irms 20% 40% 60% 80% 100% 120% 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 Temperature Th(°C) Maximum Overtemperature ∆Tlim vs Th Temperature Th(°C) ∆Tlim (°C) 100 105 110 115 120 125 130 135 Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. Impedance Graph

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 70°C) 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 22.5 mm 0.15 µF 0.33 µF 0.47 µF 0.68 µF 1 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 10 mm 0.01 µF 0.047 µF 0.068 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 15 mm 0.01 µF 0.047 µF 0.1 µF 0.15 µF 0.22 µF 0.33 µF 0.47 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 27.5 mm 1 µF 1.5 µF 2.2 µF 4.7 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 37.5 mm 1.5 µF 2.2 µF 4.7 µF 6.8 µF 10 µF 15 µF

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Maximum Current (Irms) Versus Frequency (Sinusoidal Waveform/Th ≤ 70°C) 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 22.5 mm 0.15 µF 0.33 µF 0.47 µF 0.68 µF 1 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 10 mm 0.01 µF 0.047 µF 0.068 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 15 mm 0.01 µF 0.047 µF 0.1 µF 0.15 µF 0.22 µF 0.33 µF 0.47 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 27.5 mm 1 µF 1.5 µF 2.2 µF 4.7 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 37.5 mm 1.5 µF 2.2 µF 4.7 µF 6.8 µF 10 µF 15 µF

8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Environmental Test Data Test IEC Publication Procedure Endurance EN/IEC 60384–14 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s 2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds) P assive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle flame test Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, days Approvals Certification Body Mark Specification File Number IMQ S-p.A. EN/IEC 60384–14 CA08.00063 UL UL 60384–14 and CAN/CSA E60384–14 (310 VAC) E97797 CQC IEC 60384–14 CQC15001128630 CQC15001128703 CQC15001128705 Environmental Compliance All KEMET EMI capacitors are RoHS compliant.

9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Dimensions in mm Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Legacy Part NumberT H L 1 11.0 20.0 32.0 27.5 150 463R4100(1)H7(2) R463R4100(1)H7(2) 10 24.0 44.0 41.5 37.5 100 463W5100(1)H7(2) R463W5100(1)H7(2) 15 30.0 45.0 41.5 37.5 100 463W5150(1)H7(3) R463W5150(1)H7(3) Capacitance Value (µF) T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Legacy Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (3) M = ±20% (only available tolerance).

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder material. This has increased the liquidus temperature from 183°C for SnPb eutectic alloys to 217 221°C for the new allo ys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre- heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of mm). Great care must be taken during soldering. The recommended solder profiles from KEMET should be used. Consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition serves as a solid guideline for successful soldering. See Figur e 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above-recommended limits may result to degradation of or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after curing surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Allow time for the capacitor surface temperature to return to normal temperature before performing the second soldering cy cle. Manual Soldering Recommendations Following is the recommendation for manual soldering with a soldering iron. The soldering iron tip temperature should be set at 350°C (+10°C maximum), with the soldering duration not to exceed more than 3 seconds. Recommended Soldering Temperature 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 Soldering Time (seconds) Soldering Iron Bit Temperature (°C) Wave Soldering Recommendations 100 150 200 250 300 0 40 80 120 160 200 240 Temperature (°C) Time (seconds) Cooling 2+3 seconds max260°C First Wave Second Wave ∆ T < 150°C ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Preheating Tpreheat Typical

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Soldering Process cont. Wave Soldering Recommendations cont. The table indicates the maximum set-up temperature of the soldering process. Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Pitch mm Capacitor Pitch > 15 mm Capacitor Pitch mm Capacitor Pitch > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 125°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: set the temperature so that the maximum temperature inside the element is below the limit. Dielectric Film Material Maximum Temperature Measured Inside the Element Polyester 160°C Polypropylene 125°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as it is in normal flow soldering, without t ouching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten solder, only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document. Howe ver, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts do not overheat.

12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Construction Detailed Cross Section Self-Extinguishing Resin Molded Plastic Case Molded Plastic Case Leads Metal Contact Layer Metal Contact Layer Margin Single-sided Metallized Polypropylene Film (Second Layer) Single-sided Metallized Polypropylene Film (First Layer) Margin Margin Single-sided Metallized Polypropylene Film FILM WINDING SCHEME OPTIONS

1 Section

Single-sided Metallized Polypropylene Film

2 Sections

3 Sections 4 Sections

Double-sided Metallized Polyester Film

3 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Film

4 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Polypropylene Film Dielectric Sulfide Film (SMR) Metallized Impregnated Paper Metallized Impregnated Paper Single-sided Metallized Polyester Film Single-sided Metallized Polyester Film Polypropylene Film Dielec- tric AXIAL - Polypropylene Film/Foil AXIAL - Single-sided Metallized Polypropylene Film Single-sided Metallized Polyester Film AXIAL - Single-sided Metallized Polyester Film AXIAL - Double-sided Metallized Polyester Film Winding Scheme

13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Marking IEC Climatic Category Approval Marks TOPFRONT Lead Spacing 10 mm Manufacturer’s Logo Manufacturing Plant IEC Climatic Category Approval Marks TOPFRONT Series Capacitance, Capacitance Tolerance, Rated Voltage Manufacturing Plant Manufacturer’s Logo Dielectric Code Safety Class Self Healing Passive Flammability Category Date Code QA Number Capacitance Tolerance Date Code Capacitance, Rated Voltage Series, Dielectric Code, Safety Class, Self Healing IEC Climatic Category Approval Marks TOPFRONT Manufacturer’s Logo Manufacturing Plant Capacitance Tolerance Date Code Capacitance, Rated Voltage Series, Dielectric Code, Safety Class, Self Healing Passive Flammability Category: B for volume ≥ 1750 mm3 C for volume < 1750 mm3 Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm NOTE: Hot imprinting with or without color or ink jet or laser marking NOTE: Hot imprinting with or without color or ink jet or laser marking *Differences are caused by technology (clichee, laser, or ink) and production line. Lead Spacing 15 mm, 22.5 mm, and 27.5 mm Passive Flammability Category: C for volume < 1750 mm3 Manufacturing Date Code (IEC–60062) Year Code Year Code Month Code Month Code

2010 A 2020 M January 1 July 7

2011 B 2021 N February 2 August 8

2012 C 2022 P March 3 September 9

2013 D 2023 R April 4 October O

2014 E 2024 S May 5 November N

2015 F 2025 T June 6 December D

2016 H 2026 U

2017 J 2027 V

2018 K 2028 W

2019 L 2029 X

14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Marking cont. IEC Climatic Category Approval Marks TOPFRONT Lead Spacing 10 mm Manufacturer’s Logo Manufacturing Plant IEC Climatic Category Approval Marks TOPFRONT Series Capacitance, Capacitance Tolerance, Rated Voltage Manufacturing Plant Manufacturer’s Logo Dielectric Code Safety Class Self Healing Passive Flammability Category Date Code QA Number Capacitance Tolerance Date Code Capacitance, Rated Voltage Series, Dielectric Code, Safety Class, Self Healing IEC Climatic Category Approval Marks TOPFRONT Manufacturer’s Logo Manufacturing Plant Capacitance Tolerance Date Code Capacitance, Rated Voltage Series, Dielectric Code, Safety Class, Self Healing Passive Flammability Category: B for volume ≥ 1750 mm3 C for volume < 1750 mm3 Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm NOTE: Hot imprinting with or without color or ink jet or laser marking NOTE: Hot imprinting with or without color or ink jet or laser marking *Differences are caused by technology (clichee, laser, or ink) and production line. Lead Spacing 15 mm, 22.5 mm, and 27.5 mm Passive Flammability Category: C for volume < 1750 mm3 Manufacturing Date Code (IEC–60062) Year Code Year Code Month Code Month Code

15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped Lead and Packaging Code: 00 - JA - JB JE - JH JM 40 – 50 GY CK DQ 4 9 13 2,000 2,200 1,800 750 1,500 1,000 5 11 13 1,300 2,000 1,500 600 1,250 800 6 12 13 1,000 1,800 1,200 500 1,000 680 5 11 18 2,000 1,250 1,000 600 1,250 800 6 12 18 1,750 1,000 900 500 1,000 680 6 17.5 18 1,000 800 700 500 1,000 680 7.5 13.5 18 1,000 800 700 350 800 500 7.5 18.5 18 900 650 500 - 800 500 8.5 14.5 18 1,000 650 500 300 700 440 9 12.5 18 1,000 700 520 270 650 410 10 16 18 750 550 500 270 600 380 11 19 18 450 400 350 - 500 340 13 12 18 750 520 490 200 480 280 22.5 6 15 26.5 805 450 500 - 700 464 7 16 26.5 700 450 500 - 550 380 10 18.5 26.5 396 350 300 - 350 235 11 20 26.5 360 200 250 - 350 217 13 22 26.5 300 150 200 - 300 27.5 9 17 32 816 408 408 - 450 - 11 20 32 560 336 336 - 350 - 13 22 32 480 288 288 - 300 - 14 28 32 352 176 176 - - - 18 33 32 256 128 128 - - - 22 37 32 168 112 112 - - - 37.5 11 22 41.5 420 252 252 - - - 13 24 41.5 360 216 216 - - - 16 28.5 41.5 216 108 108 - - - 19 32 41.5 192 96 96 - - - 20 40 41.5 126 84 84 - - - 24 44 41.5 108 72 72 - - - 30 45 41.5 90 60 60 - - -

17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifi cations Dimensions (mm) H W T 360 340 59 Reel Specifi cations Reel Size Dimensions (mm) D H W Standard 355 30 55 MaximumLarge 500 25 D W H H T W

18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3122_R46_X2_310_125C • 1/13/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R46, Class X2, 310 VAC, 125°C KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation.