R46

R46 KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. marking: Manufacturer’s logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1 operating temperature range: -40 to +110°C Related documents: IEC 60384-14, EN 60384-14.

eleCTRiCAl CHARACTeRiSTiCS

Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc 300Vac (50/60Hz) / 630 Vdc Capacitance range: 0.01µF to 10µF Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): tolerance ±5% (J) available upon request dissipation factor (dF): tgδ 10-4 at +25°C ±5°C: ≤10 (6)* at 1kHz* Typical value insulation resistance: Test conditions Temperature: +25°C±5°C Voltage charge time: 1 min Voltage charge: 100 Vdc Performance ≥1x105 MΩ (5x105 MΩ )* for C≤0.33µF ≥30000 s (150000 s )* for C>0.33µF * Typical value Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C R.46 X2 CLASS (IEC 60384-14) - MKP Series meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTI ES Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PR oDUCT CoDE: R46 note: R.46 series has replaced the 1.40 series and 1.47 series. For new design we suggest the use of the R.46 series. Ø d ±0.05 p ≤15 22.5 ≤ p ≤ 27.5 p = 37.5 0.6 or 0.8* 0.8 1 *See size table. All dimensions are in mm. Loose Taped Fig.1 Fig.2 TeST meTHod And PeRFoRmAnCe damp heat, steady state: Test conditions 1st Temperature: +40°C ± 2°C Relative humidity (RH): 93% ±2% Test duration: 56 days Test conditions 2nd Temperature: +60°C ± 2°C Relative humidity (RH): 95% ±2% Test duration: 500 hours Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤5% Insulation resistance: ≥50% of initial limit. endurance: Test conditions Temperature: +110°C ± 2°C Test duration: 1000 h Voltage applied: 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤10% Insulation resistance: ≥50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260°C ± 5°C Dipping time (with heat screen):10 s ± 1 s Performance Capacitance change |∆C/C|: ≤2% Winding scheme single sided metallized polypropylene film Pitch Box thickness (B) Maximum dimensions (mm) (mm) (mm) B max H max L max 10.0 All B +0.2 H +0.1 L +0.2 22.5 All B +0.2 H +0.1 L +0.3 27.5 All B +0.2 H +0.1 L +0.3 37.5 All B +0.3 H +0.1 L +0.3 Insulated rigid leads Insulated flexible leads 0.5mm2

R.46 X2 CLASS (IEC 60384-14) - MKP Series meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTI ES APPRoVAlS () ENEC mark has replaced all the following European National marks: All dimensions are in mm E12 Series available upon request Table 1 Standard packaging style lead length (mm) Taping style ordering code (Digit 10 to 11) (mm) Fig. (No.) Pitch (mm) AMMo-PACK AMMo-PACK 12.70 19.05 10.0/15.0 22.5 DQ DQ REEL Ø500mm REEL Ø500mm 12.70 19.05 10.0/15.0 22.5/27.5 CK CK Loose, short leads Loose, long leads Loose, long leads 25 -1/+2 30 +5 Loose, insulated rigid leads Loose, insulated flexible leads 150 ±5 Note: Ammo-pack is the preferred packaging for taped version. For “capacitor connected in serial with main line” (two - phase and three - phase net) application, please read the “SHoRT GUIDE To CHooSE THE RIGHT FILM CAPACIToRS” and contact our Technical Service for choosing the safest solution. Rated Cap. 275 Vac / 560 Vdc Std dimensions Ø d max dv/dt at 390Vdc Part number B H l p (V/ µs) 0.015 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2150 - - N0 - 0.022 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2220 - - N0 - 0.033 µF 5.0 1 1.0 13.0 10.0 0.6 500 R46 KF 2330 - - M1 - 0.047 µF 5.0 1 1.0 13.0 10.0 0.6 500 R46 KF 2470 - - N0 - 0.068 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 2680 - - M1 - 0.10 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - M1 M 0.010 µF 5.0 1 1.0 18.0 15.0 0.6 400 R46 KI 2100 - - 01 - 0.015 µF 5.0 1 1.0 18.0 15.0 0.6 400 R46 KI 2150 - - 01 - 0.022 µF 5.0 1 1.0 18.0 15.0 0.6 400 R46 KI 2220 - - 01 - 0.033 µF 5.0 1 1.0 18.0 15.0 0.6 400 R46 KI 2330 - - 01 - 0.047 µF 5.0 1 1.0 18.0 15.0 0.6 400 R46 KI 2470 - - 01 - 0.068 µF 5.0 1 1.0 18.0 15.0 0.6 400 R46 KI 2680 - - 01 - 0.10 µF 5.0 1 1.0 18.0 15.0 0.6 400 R46 KI 3100 - - M1 - 0.15 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - M2 - 0.15 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3150 - - L2 - 0.22 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - M2 - 0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - L2 - 0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - 02 - 0.33 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3330 - - N0 - 0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - M1 - 0.33 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - N1 M 0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - 02 - 0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - 01 - 0.47 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - 02 M 0.47 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3470 - - N0 M 0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - M1 - 0.56 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3560 - - N0 - 0.60 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3600 - - N0 - 0.15 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3150 - - 01 - 0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - M1 - 0.33 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - N0 - 0.47 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - N0 - 0.68 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - M2 - 1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - N2 M 1.0 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - N1 - 0.47 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - 01 - 0.68 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - M1 - 1.0 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - M1 - 1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - M1 - 2.2 µF 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - M2 - 2.2 µF 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4220 - - M1 - 3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - M2 - 4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - M2 - 4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4470 - - M1 - 1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - M1 - 2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - M2 M 2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - M1 - 3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - M1 - 4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - M2 M 4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - M1 - 6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - M2 - 6.8 µF 24.0 44.0 41.5 37.5 1.0 100 R46 KW 4680 - - M1 - 10.0 µF 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - M1 - Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) () ENEC IEC 60384-14 Class X2 File No.V4413 UL 1414 (up to 1µF, 85°C; 250Vac) Across-the-line File No.E97797 CSA - C22.2 No.1 (up to 1µF, 85°C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference Filters certified for Canada File No.E85238 GB/T 14472 Class X2 File CQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 Not for use in series with the mains. See www.kemet.com for more information. Not for new design.

R.46 X2 CLASS (IEC 60384-14) - MKP Series meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTI ES APPRoVAlS () ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style lead length (mm) Taping style ordering code (Digit 10 to 11)P2 (mm) Fig. (No.) Pitch (mm) AMMo-PACK AMMo-PACK 12.70 19.05 10.0/15.0 22.5 DQ DQ REEL Ø500mm REEL Ø500mm 12.70 19.05 10.0/15.0 22.5/27.5 CK CK Loose, short leads Loose, long leads Loose, long leads 25 -1/+2 30 +5 Loose, insulated rigid leads Loose, insulated flexible leads 150 ±5 Note: Ammo-pack is the preferred packaging for taped version. For “capacitor connected in serial with main line” (two - phase and three - phase net) application, please read the “SHoRT GUIDE To CHooSE THE RIGHT FILM CAPACIToRS” and contact our Technical Service for choosing the safest solution. Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) All dimensions are in mm E12 Series available upon request () ENEC IEC 60384-14 Class X2 File No.V4413 UL 1414 (up to 1µF, 85°C; 250Vac) Across-the-line File No.E97797 CSA - C22.2 No.1 (up to 1µF, 85°C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference Filters certified for Canada File No.E85238 GB/T 14472 Class X2 File CQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 Rated Cap. 275 Vac / 560 Vdc Std dimensions Ø d max dv/dt at 390Vdc Part number B H l p (V/ µs) 0.033 µF 0.047 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2470 - - P0 - 0.068 µF 5.0 1 1.0 13.0 10.0 0.6 500 R46 KF 2680 - - P0 - 0.1 µF 5.0 1 1.0 13.0 10.0 0.6 500 R46 KF 3100 - - P1 M 0.1 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - P0 - 0.15 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3150 - - P0 M 0.15 µF 5.0 1 1.0 18.0 15.0 0.6 400 R46 KI 3150 - - P0 - 0.22 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3220 - - P0 - 0.33 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3330 - - P0 - 0.33 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - P1 0.33 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3330 - - P2 - 0.47 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3470 - - P0 0.47 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3470 - - P1 M 0.47 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3470 - - P2 M 0.47 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - P3 - 0.68 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3680 - - P1 M 0.68 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3680 - - P0 - 0.82 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3820 - - P0 M 0.47 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3470 - - P1 - 0.56 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3560 - - P1 M 0.56 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3560 - - P0 - 0.68 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3680 - - P0 - 1.0 µF 8.5 17.0 26.5 22.5 0.8 200 R46 KN 4100 - - P1 M 1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - P0 - 1.5 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4150 - - P1 M 1.5 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4150 - - P0 - 2.2 µF 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4220 - - P0 M 1.0 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 4100 - - P0 - 1.5 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4150 - - P0 - 2.2 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4220 - - P0 - 3.3 µF 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4330 - - P0 - 4.7 µF 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4470 - - P1 M 4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - P0 - 6.8 µF 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4680 - - P0 - 2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - P0 - 3.3 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4330 - - P0 - 4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - P0 - 6.8 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4680 - - P0 - 10.0 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 5100 - - P0 - Not for use in series with the mains. See www.kemet.com for more information.

R.46 X2 CLASS (IEC 60384-14) - MKP Series meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES APPRoVAlS Table 1 Standard packaging style lead length (mm) Taping style ordering code (Digit 10 to 1 1)P2 (mm) Fig. (No.) Pitch (mm) AMMo-PACK AMMo -PACK 12.70 19.05 10.0/15.0 22.5 DQ DQ REEL Ø500mm REEL Ø500mm 12.70 19.05 10.0/15.0 22.5/27.5 CK CK Loose, short leads Loose, long leads Loose, long leads 25 -1/+2 30 +5 Loose, insulated rigid leads Loose, insulated flexible leads 150 ±5 Note: Ammo-pack is the preferred packaging for taped version. () ENEC mark has replaced all the following European National marks: Rated voltage (3=300Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) All dimensions are in mm E12 Series available upon request For “capacitor connected in serial with main line” (two - phase and three - phase net) application, please read the “SHoRT GUIDE To CHooSE THE RIGHT FILM CAPACIToRS” and contact our T echnical Service for choosing the safest solution. () ENEC IEC 60384-14 Class X2 File No.V4413 UL 1414 (up to 1 µF, 85°C; 250Vac) Across-the-line File No.E97797 CSA - C22.2 No.1 (up to 1µ F, 85°C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 V ac) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference Filters certified for Canada File No.E85238 GB/T 14472 Class X2 FileCQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 Rated Cap. 300 Vac / 630 Vdc Std dimensions Ø d max dv/dt at 390Vdc Part number B H l p (V/ µs) 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.15 µF 0.15 µF 0.22 µF 0.22 µF 0.22 µF 0.33 µF 0.33 µF 0.33 µF 0.33 µF 0.47 µF 0.47 µF 0.56 µF 0.60 µF 0.15 µF 0.22 µF 0.33 µF 0.47 µF 0.68 µF 1.0 µF 1.0 µF 0.47 µF 0.68 µF 1.0 µF 1.5 µF 2.2 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 1.5 µF 2.2 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 3W 4680 - - M2 - 6.8 µF 10.0 µF Not for use in series with the mains. See www.kemet.com for more information.

R.46 X2 CLASS (IEC 60384-14) - MKP meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Typical applications: interference suppression and «across- the-line» applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRoDUCT Co DE: R46 neW 125°C Rated Cap.

275 Vac / 560 Vdc

Std dimensions Ø d max dv/dt at 390Vdc (V/ µs) Part number B H L p 0.010 µF 5.0 1 1.0 13.0 10.0 0.6 500 R46 K F 2100 - - H1 - 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.15 µF 0.15 µF 0.15 µF 0.22 µF 0.22 µF 0.22 µF 0.22 µF 0.33 µF 0.33 µF 0.33 µF 0.47 µF 0.15 µF 0.22 µF 0.33 µF 0.47 µF 0.68 µF 1.0 µF 300Vac available upon request E12 Series available upon request All dimensions are in mm Loose Taped Fig.1 Fig.2 Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) For “capacitor connected in serial with main line” (two - phase and three - phase net) application, please read the “SHoRT GUIDE To CHooSE THE RIGHT FILM CAPACIToRS” and contact our T echnical Service for choosing the safest solution. Ø d ±0.05 p ≤15 p = 22.5 0.6 or 0.8* 0.8 *See size table. All dimensions are in mm. GeneRAl TeCHniCAl dATA dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. marking: Manufacturer’s logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/125/56 IEC 60068-1 operating temperature range: -40 to +125°C Related documents: IEC 60384-14; EN 60384-14 Rated voltage (VR): 275 Vac (50/60Hz) / 560 Vdc Capacitance range: 0.01µF to 1µF TeST meTHod And PeRFoRmAnCe endurance: Test conditions Temperature: +125°C±2°C Test duration: 1000 h Voltage applied: 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤ 10% Insulation resistance: ≥ 50% of initial limit. APPRoVA lS () ENEC IEC 60384-14 Class X2 File No.CA08.00063 UL 1414 (up to 1 µF, 85°C; 250Vac) Across-the-line File No.E97797 CSA - C22.2 No.1 (up to 1µ F, 85°C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 V ac) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference Filters certified for Canada File No.E85238 Approved according to IEC 60384-14 According to IEC 60065 () ENEC mark has replaced all the following European National marks: Not for use in series with the mains. See www.kemet.com for more information.

Ø d ±0.05 p ≤15 22.5 ≤ p ≤ 27.5 p = 37.5 *See size table. All dimensions are in mm. GeneRAl TeCHniCAl dATA dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. marking: Manufacturer’s logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1 operating temperature range: -40 to +110°C Related documents: IEC 60384-14, EN 60384-14. Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc Capacitance range: 0.022µF to 10µF Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): tolerance ±5% (J) available upon request dissipation factor (dF): tgδ 10-4 at +25°C ±5°C: ≤15 (8)* at 1kHz * Typical value insulation resistance: Test conditions Temperature: +25°C±5°C Voltage charge time: 1 min Voltage charge: 100 Vdc Performance ≥1x105 MΩ (5x105 MΩ )* for C≤0.33µF ≥30000 s (150000 s )* for C>0.33µF * Typical value Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C R.46 SVeRSion X2 CLASS (IEC 60384-14) - MKP Series meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Typical applications: This special R46 release is designed for applications in series with the main . PRoDUCT Co DE: R46 Pitch Box thickness (B) Maximum dimensions (mm) (mm) (mm) B max H max L max 10.0 All B +0.2 H +0.1 L +0.2 22.5 All B +0.2 H +0.1 L +0.3 27.5 All B +0.2 H +0.1 L +0.3 37.5 All B +0.3 H +0.1 L +0.3 TeST meTHod And PeRFoRmAnCe damp heat, steady state: Test conditions 1st Temperature: +40°C ± 2°C Relative humidity (RH): 93% ±2% Test duration: 56 days Test conditions 2nd Temperature: +60°C ± 2°C Relative humidity (RH): 95% ±2% Test duration: 500 hours Test conditions 3rd Temperature: +40°C ± 2°C Relative humidity (RH): 93% ±2% Test duration: 500 hours Voltage value: 230 Vac, 50 Hz Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤5% Insulation resistance: ≥50% of initial limit. endurance: Test conditions Temperature: +110°C ± 2°C Test duration: 1000 h Voltage applied: 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤10% Insulation resistance: ≥50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260°C ± 5°C Dipping time (with heat screen):10 s ± 1 s Performance Capacitance change |∆C/C|: ≤2% Loose Taped Fig.1 Fig.2 Not for use in series with the mains. See www.kemet.com for more information. Not for new design.

Rated Cap. (*) Ø d max dv/dt at 390Vdc Part number B H l p (V/ µs) 0.015 µ 0.022 µ 0.033 µ 0.047 µ 0.068 µ 0.10 µ 0.15 µ 0.15 µ 0.22 µ 0.22 µ 0.22 µ 0.22 µ 0.33 µ 0.33 µ 0.33 µ 0.47 µ 0.47 µ 0.68 µ 0.22 µ 0.33 µ 0.33 µ 0.47 µ 0.47 µ 0.68 µ 1.0 µ 1.0 µ 1.2 µ 0.47 µ 0.68 µ 1.0 µ 1.5 µ 2.2 µ 3.3 µ 4.7 µ 1.5 µ 2.2 µ 2.2 µ 3.3 µ 4.7 µ 4.7 µ 6.8 µ 10.0 µ R.46 SVeRSion X2 CLASS (IEC60384-14) - MKP Series meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Table 1 Standard packaging style lead length (mm) Taping style ordering code (Digit 10 to 11)P2 (mm) Fig. (No.) Pitch (mm) AMMo-PACK AMM o-PACK 12.70 19.05 10.0/15.0 22.5 DQ DQ REEL Ø500mm REEL Ø500mm 12.70 19.05 10.0/15.0 22.5/27.5 CK CK Loose, short leads Loose, long leads Loose, long leads 25 -1/+2 30 +5 Loose, insulated rigid leads Loose, insulated flexible leads 150 ±5 () ENEC mark has replaced all the following European National marks: APPRoVAlS Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) 300Vac Available upon request E12 Series available upon request All dimensions are in mm () ENEC IEC 60384-14 Class X2 File No.V4413 UL 1414 (up to 1µF, 85°C; 250Vac) Across-the-line File No.E97797 CSA - C22.2 No.1 (up to 1 µF, 85°C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310 V ac) Electromagnetic Interference Filters certified for Canada File No.E85238 GB/T 14472 Class X2 File CQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 Note: Ammo-pack is the preferred packaging for taped version. Not for use in series with the mains. See www.kemet.com for more information. Not for new design.

Fig.1 Fig.2 Insulated rigid leads Insulated flexible leads 0.5mm2 Ø d ±0.05 P= 22.5 to 27.5 p = 37.5 0.8 1 All dimensions are in mm. GeneRAl TeCHniCAl dAT A dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. marking: Manufacturer logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1 operating temperature range: -40 to +110°C Related documents: IEC 60384-14, EN 60384-14. Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc 300Vac (50/60Hz) / 630 Vdc Capacitance range: 0.22µF to 10µF Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): dissipation factor (dF): tgδ 10-4 at +25°C ±5°C: ≤10 (6)* at 1kHz* Typical value insulation resistance: Test conditions Temperature: +25°C±5°C Voltage charge time: 1 min Voltage charge: 100 Vdc Performance ≥1x105 MΩ (5x105 MΩ )* for C≤0.33µF ≥30000 s (150000 s )* for C>0.33µF * Typical value T est voltage between terminations (on all pieces): R.46+R Capacitors with discharge resistor X2 CLASS (IEC 60384-14) - MKP Series meTAllized PolYPRoPYlen e Film CAP ACiToR SELF-HEALING PRoPER TIES Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PR oDUCT CoDE: R46 Pitch Box thickness (B) Maximum dimensions (mm) (mm) (mm) B max H max L max 22.5 All B +0.2 H +0.1 L +0.3 27.5 All B +0.2 H +0.1 L +0.3 37.5 All B +0.3 H +0.1 L +0.3 TeST meTHod And PeRFoRmAnCe damp heat, steady state: Test conditions 1st Temperature: +40°C ± 2°C Relative humidity (RH): 93% ±2% Test duration: 56 days Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤5% Insulation resistance: ≥50% of initial limit. endurance: Test conditions Temperature: +110°C ± 2°C Test duration: 1000 h Voltage applied: 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤10% Insulation resistance: ≥50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260°C ± 5°C Dipping time (with heat screen):10 s ± 1 s Performance Capacitance change |∆C/C|: ≤2% APPRoVAlS ENEC IEC 60384-14 Class X2 File No.V4413 UL 1283 (310Vac-105°C) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310Vac-105°C) Electromagnetic Interference Filters certified for Canada File No.E85238 Approved according to IEC 60384-14 According to IEC 60065. Not for use in series with the mains. See www.kemet.com for more information.

The part number, comprising 15 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R 4 6 - - Digit 1 to 3 Series code. Digit 4 a.c. rated voltage: K = 275Vac; 3 = 300Vac Digit 5 Pitch: Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use Digit 14 Capacitance tolerance: K=±10%; M=±20% Digit 15 Value of the discharge resistor (tolerance±10%) according to the following table*: R.46+R Capacitors with discharge resistor X2 CLASS (IEC 60384-14) - MKP Series meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES PRoDUCT CoDE: R46 Table 1 Standard packaging style lead length (mm) Taping style ordering code (Digit 10 to 11)P2 (mm) Fig. (No.) Pitch (mm) REEL Ø500mm 19.05 2 22.5/27.5 CK Loose, short leads Loose, long leads Loose, long leads 25 -1/+2 30 +5 Loose, insulated rigid leads Loose, insulated flexible leads 150 ±5 Rated Cap. (*)

300 Vac / 630 Vdc

Std dimensions Ø d max dv/dt at 390Vdc (V/ µ Part number B H L p 0.22 µF 0.33 0.47 0.68 µF 0.47 0.68 1.0 1.5 2.2 3.3 4.7 1.5 2.2 3.3 4.7 6.8 10.0 Rated Cap. (*) Std dimensions Ø d max dv/dt at 390Vdc (V/ µ Part number B H L p 0.22 µF 0.33 0.47 0.68 µF 0.47 0.68 1.0 1.5 2.2 3.3 4.7 1.5 2.2 3.3 4.7 6.8 10.0 Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) Value of discharge resistor (Table 2) Rated voltage (3=300Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) Value of discharge resistor (Table 2) *other resistors are avaible upon request. Table 2 R code (x) 470 kΩ E 680 kΩ F

1 MΩ G

1.2 MΩ L

1.5 MΩ N

2.2 MΩ P

3.3 MΩ Q

4.7 MΩ S

6.8 MΩ T

10 MΩ V

Not for use in series with the mains. See www.kemet.com for more information. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.