R41BF122050T0K

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 21

Technical content

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

• A pprovals: ENEC, UL, cUL, CQC C lass Y2/X1 (IEC 60384-14) T HB Grade IIIB: 85°C, 85% RH, 1,000 hours at 350 V URAC acc. to IEC 60384-14 H alogen-Free (black case) upon request R ated voltage: 350 VAC 50/60 Hz C apacitance range: 0.0022 – 1.2 µF L ead spacing: 10 – 37.5 mm
• C apacitance tolerance: ±20%, ±10% C limatic category 40/125/56, IEC 60068-1 T ape and reel in accordance with IEC 60286-2 R oHS compliant and lead-free terminations
• Operating temperature range of −40˚C to +125˚C
• S elf-healing properties
• A utomotive (AEC–Q200) grade Overview The R41B is constructed of metallized polypropylene film, encapsulated with self-extinguishing r esin, in a box of material meeting the requirements of UL 94 V–0. Automotive Grade devices meet the demanding Automotive Electronics Council's AEC–Q200 qualification requirements.

Applications

For use in electromagnetic interference (EMI) suppression filter in "line-to-ground" and "across-the-line" applications, r equiring Y2/X1 safety classification. Suitable for use in situations wher e failure of the capacitor could lead to danger of electric shock. Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Part Number System R41 B I 2330 00 T0 M V106 Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Packaging Internal Use Capacitance Tolerance Optional C-Spec Y2, Metallized Polypropylene B = 350 F = 10.0 I = 15.0 N = 22.5 R = 27.5 W = 37.5 The last three digits represent significant figures. T he first digit s pecifies number o f zeros to be added. See Ordering Options Table K = ±10% M = ±20% Blank = Standard, grey case V106 = Halogen Free Version, black case

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 22.5 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4 +2/−0 00 Ammo Pack H0= 18.5 ±0.5 DQ Other Lead and Packaging Options Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK Tape & Reel (Standard Reel) H0= 18.5 ±0.5 GY Bulk (Bag)2 – Short Leads 3.5 + 0.5/−0 JB Bulk (Bag)2 – Short Leads 4.0 +0.5/−0 JE Bulk (Bag) 2 – Short Leads 3.2 + 0.3/−0.2 JH Bulk (Bag) – Long Leads 18 ±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 27.5 Standard Lead and Packaging Options Bulk (Tray) – Short Leads 4 +2/−0 00 Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK1 Other Lead and Packaging Options Bulk (Tray) – Long Leads 30 +5/−0 40 Bulk (Tray) – Long Leads 25 +2/−1 50 37.5 Standard Lead and Packaging Options Bulk (Tray)3 – Short Leads 4 +2/−0 00 Other Lead and Packaging Options Bulk (Tray)3 – Long Leads 30 +5/−0 40 Bulk (Tray)3 – Long Leads 25 +2/−1 50

1 Not for all sizes, see "Packaging Quantities" table

2 For lead spacing 22.5 case sizes ≥ 8.5*17*26.5 the parts are packed in a Pizza box 335*320*34 mm

3 For standard (no C-Spec); with C-Spec "V106" packaging is in Pizza Pack

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Dimensions – Millimeters F L T H LL S FRONT VIEW SIDE VIEW S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Note: See Ordering Options Table for lead length (LL/H 0) options.

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Dimensions – Millimeters for parts with C-Spec "V106" (Halogen-Free parts) F L T H LL S FRONT VIEW SIDE VIEW S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Note: See Ordering Options Table for lead length (LL/H 0) options.

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Performance Characteristics Dielectric Polypropylene fi lm Plates Metal layer deposited by evaporation under vacum Winding Non-inductive type Leads Tinned wire Protection Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL Related Documents IEC 60384-14, EN 60384-14 Rated Voltage (V R) 350 VAC (50/60 Hz)/1,500 VDC Capacitance Range 0.0022 – 1.2 µF Capacitance Values E6 series (IEC 60063) Capacitance Tolerance ±10%, ±20% Temperature Range −40°C to +125°C Climatic Category 40/125/56 IEC 60068-1 Reliability Operational life 100,000 hours at 85°C; 2,000 hours at 125°C Storage Conditions Storage time: months from the date marked on the label package Average relative humidity per year 70% RH 85% for days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Approvals ENEC, UL, cUL, CQC Dissipation Factor (tanδ) at 1 kHz Maximum Values at +25°C ±5°C pitch = 10 mm pitch mm 0.8% 0.3% (typical: 0.2%) Hi-Pot Test Terminal To Terminal 4.0k VDC (Type test 60 seconds, each ramp 5 seconds) Terminal To Case 4.0k VDC (Type test 60 seconds, each ramp 5 seconds) Insulation Resistance Measured at +25°C ±5°C Minimum Values Between Terminals Voltage Charge Voltage Charge Time C 0.33 μF C 0.33 μF

100 VDC 1 minute ≥ 1 • 105 MΩ

( ≥ 5 • 105 MΩ )* ≥ 30,000 MΩ • µF * Typical value

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Performance Characteristics cont. 100 −40 −20 0 20 40 60 80 Relative Humidity (%) Temperature (°C) Maximum Humidity in Storage Condition

30 Days

Temperature Th(°C) Maximum Irms vs. Th 20% 40% 60% 80% 100% 120% 25 35 45 55 65 75 85 95 105 115 125 Maximum Overtemperature ∆Tlim vs Th Temperature Th(°C) ∆Tlim (°C) 100 110 120 130 Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C.

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 37.5 mm 0.47 µF 1 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 22.5 mm 0.047 µF 0.1 µF 0.22 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 27.5 mm 0.22 µF 0.47 µF 0.68 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 10 mm 0.022 µF 0.068 µF 100 1,000 0.1 1.0 10.0 100.0 Voltage (Vrms) Frequency (kHz) Lead Spacing 15 mm 0.01 µF 0.022 µF 0.068 µF

8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Maximum Current (Irms) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 37.5 mm 0.47 µF 1 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 22.5 mm 0.047 µF 0.1 µF 0.22 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 27.5 mm 0.22 µF 0.47 µF 0.68 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 10 mm 0.022 µF 0.068 µF 0.01 0.1 0.1 1.0 10.0 100.0 Current (Arms) Frequency (kHz) Lead Spacing 15 mm 0.01 µF 0.022 µF 0.068 µF

9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress T est Qualification for Passive Components. F or additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. Impedance Graph 0.01 0.1 100 1000 10000 100000 1000000 10000000 0.0001 0.001 0.01 0.1 1 10 100 1000 10000 |Z| (Ω) Frequency (MHz) 1 nF - p 10 10 nF - p 15 100 nF - p 22.5 1µF - p 37.5

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384-14 1.7 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98m/s 2 Bump IEC 60068-2-29 Test Eb 1,000 bumps at 390 m/s 2 Change of Temperature IEC 60068-2-14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384-14 VR +20 surge pulses at 5 kV (pulse every 5 seconds) P assive Flammability IEC 60384-14 IEC 60384-1, IEC 60695-11-5 Needle Flame Test Damp Heat Steady State IEC 60068-2-78 Test Cab +40°C and 93% RH, days THB test1 65°C, 93% RH and 1,000 VDC, 1,600 hours Capacitance change (Δ C/C): ≤ 10% D issipation factor change (Δtanδ): 150 10−4 (at 1 kHz for Cap > 1 µF) Dissipation factor change (Δtanδ): 240 10−4 (at 10 kHz for Cap ≤ 1 µF) IR ≥ 50% of initial limit or minimum 200 MΩ THB test2 85°C, 85% RH and 1,500 VDC, 1,000 hours Capacitance change (Δ C/C): ≤ 10% D issipation factor change (Δtanδ): 150 10−4 (at 1 kHz for Cap > 1 µF) Dissipation factor change (Δtanδ): 240 10−4 (at 10 kHz for Cap ≤ 1 µF) IR ≥ 50% of initial limit or minimum 200 MΩ THB test3 85°C, 85% RH and 350 VAC, 1,000 hours Capacitance change (Δ C/C): ≤ 10% D issipation factor change (Δtanδ): 150 10−4 (at 1 kHz for Cap > 1 µF) Dissipation factor change (Δtanδ): 240 10−4 (at 10 kHz for Cap ≤ 1 µF) IR ≥ 50% of initial limit or minimum 200 MΩ Approvals Certification Body Mark Specification File Number IMQ S.p.A. EN/IEC 60384-14 Applying UL UL 60384-14 and CAN/CSA E60384-14 (350 VAC) Applying CQC IEC 60384-14 Applying

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Environmental Compliance R41B HF with C-Spec "V106" Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Dimensions in mm Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part NumberT H L Capacitance Value (µF) T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (3) M = ±20% (only available tolerance).

12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Table 2 – Ratings & Part Number Reference for parts with C-Spec "V106" Capacitance Value (µF) Dimensions in mm Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part NumberT H L Capacitance Value (µF) T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options.

13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. T he recommended solder profiles from KEMET should be used. Please consult KEME T with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the abo ve the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if thr ough-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations The following is the recommendation for manual soldering with a soldering iron. The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering dur ation not to exceed more than 3 seconds. Recommended Soldering Temperature 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) Soldering Iron Bit Temperature (°C) Wave Soldering Recommendations 100 150 200 250 300 0 40 80 120 160 200 240 Temperature (°C) Time (seconds) Cooling 2+3 seconds max260°C First Wave Second Wave ∆ T < 150°C ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Preheating Tpreheat Typical

14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Pitch mm Capacitor Pitch > 15 mm Capacitor Pitch mm Capacitor Pitch > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 125°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: S et the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 125°C Paper 160°C Polyphenylene sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder . When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, howe ver, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated.

15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) Vibration MIL-SDT-202 Method 204 5 g for 20 minutes, 12 cycles each of 3 orientations Use 8"X5" PCB, 0.031" thick. secure points on one side and secure p oints at corners of opposite sides. Parts mounted within from any s ecure point. Test from 10 – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitors with pitch 22.5 mm can be mechanically fixed by the leads, for pitch 22.5 mm, the capacitor body has to be properly fixed (e.g. clamped or glued). Construction Detailed Cross Section Self-Extinguishing Resin Molded Plastic Case Molded Plastic Case Leads Metal Contact Layer Metal Contact Layer Margin Single-sided Metallized Polypropylene Film (Second Layer) Single-sided Metallized Polypropylene Film (First Layer) Margin Margin

2 Sections

FILM WINDING SCHEME OPTIONS

1 Section

Single-sided Metallized Polypropylene Film

3 Sections 4 Sections

Double-sided Metallized Polyester Film

3 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Film

4 Sections

Film DielectricDouble-sided Metallized Polyester Carrier Film Polypropylene Film Dielectric Sulfide Film (SMR) Metallized Impregnated Paper Metallized Impregnated Paper Single-sided Metallized Polyester Film Single-sided Metallized Polyester Film Polypropylene Film Dielec- tric AXIAL - Polypropylene Film/Foil AXIAL - Single-sided Metallized Polypropylene Film Single-sided Metallized Polyester Film AXIAL - Single-sided Metallized Polyester Film AXIAL - Double-sided Metallized Polyester Film Winding Scheme With C-Spec "V106", the case will be in black color

16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Marking IEC Climatic Category Approval Marks TOPFRONT Lead Spacing 10 mm (Small Case Sizes) Manufacturer’s Logo Manufacturing Plant IEC Climatic Category Approval Marks TOPFRONT Series Manufacturing Plant Lead Spacing 27.5 mm (alternatives*) and 37.5 mm Manufacturer’s Logo Dielectric Code Safety Class Self Healing Passive Flammability Category Date Code QA Number Capacitance Tolerance Date Code Capacitance, Rated Voltage, T Series Series, Dielectric Code, Safety Class, Self Healing IEC Climatic Category Approval Marks TOPFRONT Lead Spacing 15 – 27.5 mm (Small Case Sizes) Manufacturer’s Logo Passive Flammability Category Manufacturing Plant Capacitance Tolerance Date Code T -SeriesCapacitance, Rated Voltage Series, Dielectric Code, Safety Class, Self Healing Passive Flammability Category NOTE: Hot imprinting with or without color or ink jet or laser marking NOTE: Hot imprinting with or without color or ink jet or laser marking Capacitance, Capacitance Tolerance Rated Voltage T Series Manufacturing Date Code (IEC 60062) Year Code Year Code Year Code Month Code Month Code

2010 A 2017 J 2024 S January 1 July 7

2011 B 2018 K 2025 T February 2 August 8

2012 C 2019 L 2026 U March 3 September 9

2013 D 2020 M 2027 V April 4 October O

2014 E 2021 N 2028 W May 5 November N

2015 F 2022 P 2029 X June 6 December D

2016 H 2023 R 2030 A

17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Marking cont. IEC Climatic Category Approval Marks TOPFRONT Lead Spacing 10 mm (Small Case Sizes) Manufacturer’s Logo Manufacturing Plant IEC Climatic Category Approval Marks TOPFRONT Series Manufacturing Plant Lead Spacing 27.5 mm (alternatives*) and 37.5 mm Manufacturer’s Logo Dielectric Code Safety Class Self Healing Passive Flammability Category Date Code QA Number Capacitance Tolerance Date Code Capacitance, Rated Voltage, T Series Series, Dielectric Code, Safety Class, Self Healing IEC Climatic Category Approval Marks TOPFRONT Lead Spacing 15 – 27.5 mm (Small Case Sizes) Manufacturer’s Logo Passive Flammability Category Manufacturing Plant Capacitance Tolerance Date Code T -SeriesCapacitance, Rated Voltage Series, Dielectric Code, Safety Class, Self Healing Passive Flammability Category NOTE: Hot imprinting with or without color or ink jet or laser marking NOTE: Hot imprinting with or without color or ink jet or laser marking Capacitance, Capacitance Tolerance Rated Voltage T Series * Differences caused by technology (clichee, laser or ink jet) and production line IEC Climatic Category Approval Marks TOPFRONT Lead Spacing 10 mm (C-Spec “V106”) Manufacturer’s Logo Manufacturing Plant Capacitance Tolerance Date Code Capacitance, Rated Voltage, T Series Series, Dielectric Code, Safety Class, Self Healing Passive Flammability Category NOTE: Hot imprinting with or without color or ink jet or laser marking Manufacturing Date Code (IEC 60062) Year Code Year Code Year Code Month Code Month Code

18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped T19 Pizza Short Leads T19 Pizza Long Leads 00 - JA - JB JE - JH JM - 40 - 50 GY - CK 1 CK DQ 00 40 - 50 4.0 9.0 13.0 2,000 1,800 750 1,500 1,000 - 1,000 5.0 11.0 13.0 1,300 1,500 600 1,250 800 - 800 6.0 12.0 13.0 1,000 1,200 500 1,000 680 - 680 5.0 11.0 18.0 2,000 1,000 600 1,250 800 - 800 6.0 12.0 18.0 1,750 900 500 1,000 680 - 680 7.5 13.5 18.0 1,000 700 350 800 500 - 500 8.5 14.5 18.0 1,000 500 300 700 440 - 440 10.0 16.0 18.0 750 500 270 600 380 - 380 11.0 19.0 18.0 450 350 270 500 340 - 340 22.5 6.0 15.0 26.5 805 500 300 700 464 - 464 7.0 16.0 26.5 700 500 250 550 380 - 380 8.5 17.0 26.5 468 300 250 450 280 - 280 10.0 18.5 26.5 396 300 160 350 235 - 235 11.0 20.0 26.5 360 250 160 350 217 - 217 13.0 22.0 26.5 300 200 130 300 - - - 27.5 13.0 22.0 32.0 480 288 - 300 - - - 14.0 28.0 32.0 352 176 - - - - - 18.0 33.0 32.0 256 128 - - - - - 37.5 13.0 24.0 41.5 360 216 - - - - - 16.0 28.5 41.5 216 108 - - - - - R41B with C-Spec "V106" in black case: 37.5

20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifi cations Dimensions (mm) H W T 360 340 59 Reel Specifi cations Reel Size Dimensions (mm) D H W Standard 355 30 55 MaximumLarge 500 25 D W H H T W

21© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F 3127_R41B_Y2_350 • 12/3/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation.