R3Y-SS8 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: R3Y-SS8 R3Y-SS8 SPECIFICATIONS ES-8958 Rev.11 Page 1/4 https://www.m-system.co.jp/ Remote I/O R3 Series DC CURRENT INPUT MODULE (8 points, isolated, connector type) 110 [4.33] 27.5 [1.08] 130 [5.12] mm [inch] MODEL: R3Y–SS8[1][2]

ORDERING INFORMATION

  • Code number: R3Y-SS8[1][2] Specify a code from below for each of [1] and [2]. (e.g. R3Y-SS8W/CE/Q)
  • Specify the specification for option code /Q (e.g. /C01/SET) NO. OF CHANNELS 8: 8 [1] COMMUNICATION MODE S: Single W: Dual [2] OPTIONS (multiple selections) Standards & Approvals blank: Without CE /CE: CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-8394) CAUTION ■ UNUSED INPUT CHANNELS Set the unused channels to -20 – +20 mA or 0 – 20 mA range. Otherwise, set them as “Unused” with PC Configurator software: R3CON. Unused channels left open with 4 – 20 mA setting are equal to the input lower than -15 %, which sets a data abnormality at the PLC or the host device.

RELATED PRODUCTS

  • Connector terminal block (model: CNT)
  • Special cable with 40-pin connector (model: FCN) GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R3-BSx) Input: 40-pin connector (Fujitsu FCN-365P040-AU) Internal power: Via the Installation Base (model: R3-BSx) Isolation: Input 1 to input 2 to input 3 to input 4 to input 5 to input 6 to input 7 to input 8 to internal bus or internal power Input range: Selectable with the side DIP SW (per 4 channels) Conversion rate: Selectable with the side DIP SW RUN indicator: Bi-color (red/green) LED; Red when the bus A operates normally; Green when the bus B operates normally; Amber when both buses operate normally. ERR indicator: Bi-color (red/green) LED; Red with input circuit abnormality (AD converter response failure); Green in normal operating conditions. INPUT SPECIFICATIONS ■ DC Current: -20 – +20 mA, 0 – 20 mA, 4 – 20 mA DC Input resistance: 66.5 Ω resistor incorporated INSTALLATION Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R3-BSx) Weight: 200 g (0.44 lb) PERFORMANCE Conversion accuracy: Refer to the table at the end of this section. Conversion rate: 160 / 80 / 40 / 20 msec. selectable Data range: 0 – 10000 of the input range Data allocation: 8 Current consumption: 100 mA

MODEL: R3Y-SS8 R3Y-SS8 SPECIFICATIONS ES-8958 Rev.11 Page 2/4 https://www.m-system.co.jp/ Temp. coefficient: ±0.03 %/°C (±0.02 %/°F) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input 1 to input 2 to input 3 to input 4 to input 5 to input 6 to input 7 to input 8 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module) 0 – 20 mA -20 – +20 mA RANGE RATE 160 msec. 80 msec. 40 msec. 20 msec. STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EXTERNAL VIEW ■ FRONT VIEW ■ SIDE VIEW RUN LED ERR LED Input Connector

  • Pin Assignment B A B A SW2SW1 ON ON ON SW3 Range Input 1-4 (SW1) or Input 5-8 (SW2) Conv. Rate Functions

MODEL: R3Y-SS8 R3Y-SS8 SPECIFICATIONS ES-8958 Rev.11 Page 3/4 https://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm [inch] 130 [5.12] POSITIONING GUIDE SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Input Circuit Input Circuit Input Circuit Input Circuit Input Circuit Input Circuit Input Circuit Input Circuit RUN LED ERR LED DIP SW INTERNAL POWER INTERNAL BUS A INTERNAL BUS B* BUS CONNECTOR Communication Circuit Control Circuit *For dual redundant communication. 18B 17B 14B 13B 10B 14A 13A 18A 17A 10A INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 INPUT 7 INPUT 8

MODEL: R3Y-SS8 R3Y-SS8 SPECIFICATIONS ES-8958 Rev.11 Page 4/4 https://www.m-system.co.jp/ INPUT CONNECTOR (40-pin) PIN NO. ASSIGNMENT PIN NO. ASSIGNMENT 1A NC 1B NC 2A NC 2B NC 3A NC 3B NC 4A NC 4B NC 5A – IN8 5B – IN4 6A + IN8 6B + IN4 7A NC 7B NC 8A NC 8B NC 9A – IN7 9B – IN3 10A + IN7 10B + IN3 11A NC 11B NC 12A NC 12B NC 13A – IN6 13B – IN2 14A + IN6 14B + IN2 15A NC 15B NC 16A NC 16B NC 17A – IN5 17B – IN1 18A + IN5 18B + IN1 19A NC 19B NC 20A NC 20B NC Specifications are subject to change without notice.