R3Y-RS8 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MODEL: R3Y-RS8 R3Y-RS8 SPECIFICATIONS ES-8959 Rev.9 Page 1/5 https://www.m-system.co.jp/ Remote I/O R3 Series RTD INPUT MODULE (8 points, isolated, connector type) 110 [4.33] 27.5 [1.08] 130 [5.12] mm [inch] MODEL: R3Y–RS8[1][2]

ORDERING INFORMATION

  • Code number: R3Y-RS8[1][2] Specify a code from below for each of [1] and [2]. (e.g. R3Y-RS8W/CE/Q)
  • Specify the specification for option code /Q (e.g. /C01/SET) NO. OF CHANNELS 8: 8 [1] COMMUNICATION MODE S: Single W: Dual [2] OPTIONS (multiple selections) Standards & Approvals blank: Without CE /CE: CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-8365)

RELATED PRODUCTS

  • Connector terminal block (model: CNT)
  • Special cable with 40-pin connector (model: FCN) GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R3-BSx) Input: 40-pin connector (Fujitsu FCN-365P040-AU) Internal power: Via the Installation Base (model: R3-BSx) Isolation: Input 1 to input 2 to input 3 to input 4 to input 5 to input 6 to input 7 to input 8 to internal bus or internal power Sensor type: Selectable with the side DIP SW (Independent types selectable per group of 4 channels.) Temperature unit: °C, °F or absolute temperature selectable with the side DIP SW Conversion rate: Selectable with the side DIP SW Burnout detection: Upscale or downscale selectable with the side DIP SW Linearization: Standard RUN indicator: Bi-color (red/green) LED; Red when the bus A operates normally; Green when the bus B operates normally; Amber when both buses operate normally. ERR indicator: Bi-color (red/green) LED; Red with burnout; Green in normal operating conditions. INPUT SPECIFICATIONS Maximum leadwire resistance: 100 Ω per wire Sensing current: ≤ 1 mA Temperature range RTD USABLE RANGE CONFORMANCE RANGE Pt 100 (JIS ’97, IEC) Pt 100 (JIS ’89) JPt 100 (JIS ’89) -240 to +900 -240 to +900 -236 to +560 -200 to +850 -200 to +660 -200 to +510 Pt 50Ω (JIS ’81) Ni 100 Cu 10 @25°C Cu 50 -236 to +700 -100 to +252 -212 to +312 -100 to +200 -200 to +649 -80 to +250 -50 to +250 -50 to +150 RTD USABLE RANGE CONFORMANCE RANGE Pt 100 (JIS ’97, IEC) Pt 100 (JIS ’89) JPt 100 (JIS ’89) -400 to +1652 -400 to +1652 -393 to +1040 -328 to +1562 -328 to +1220 -328 to +950 Pt 50Ω (JIS ’81) Ni 100 Cu 10 @25°C Cu 50 -393 to +1292 -148 to +486 -350 to +594 -148 to +392 -328 to +1200 -112 to +482 -58 to +482 -58 to +302 Max. (upscale) or min. (downscale) value of the usable range when a burnout is detected.

MODEL: R3Y-RS8 R3Y-RS8 SPECIFICATIONS ES-8959 Rev.9 Page 2/5 https://www.m-system.co.jp/ INSTALLATION Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R3-BSx) Weight: 200 g (0.44 lb) PERFORMANCE Conversion accuracy: ±1.0°C (±1.8°F) except ±3.0°C (±5.4°F) for Cu 10 @ 25°C Conversion rate: 250 msec. or 1 sec. selectable Data range °C, absolute temperature: Engineering unit value × 10 (integer) °F: Engineering unit value (integer) Data allocation: 8 Current consumption: 100 mA Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Burnout response time: ≤ 2 sec. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input 1 to input 2 to input 3 to input 4 to input 5 to input 6 to input 7 to input 8 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EXTERNAL VIEW ■ FRONT VIEW ■ SIDE VIEW RUN LED ERR LED Input Connector

  • Pin Assignment B A B A SW2SW1 ON ON ON SW3 Input 1-4 (SW1) or Input 5-8 (SW2) RTD Conv. Rate Temp. Unit Burnout Functions

MODEL: R3Y-RS8 R3Y-RS8 SPECIFICATIONS ES-8959 Rev.9 Page 3/5 https://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm [inch] 130 [5.12] POSITIONING GUIDE

MODEL: R3Y-RS8 R3Y-RS8 SPECIFICATIONS ES-8959 Rev.9 Page 4/5 https://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM INPUT 1 RTD Input Circuit INPUT 2 RTD Input Circuit INPUT 3 RTD Input Circuit INPUT 4 RTD Input Circuit INPUT 5 RTD Input Circuit INPUT 6 RTD Input Circuit INPUT 7 RTD Input Circuit INPUT 8 RTD Input Circuit INTERNAL POWER INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 INPUT 7 INPUT 8 INTERNAL BUS A INTERNAL BUS B * Control Circuit Communication Circuit BUS CONNECTOR RUN LED ERR LED DIP SW 19B 18B 17B 19B 18B 17B 15B 14B 13B 11B 10B 15B 14B 13B 11B 10B 19A 18A 17A 15A 14A 13A 11A 10A 19A 18A 17A 15A 14A 13A 11A 10A *For dual redundant communication.

  • Unused Input Channels Close across the unused input terminals with a resistor as shown below and set the DIP switch for an RTD. The resistance value must match the RTD type (100Ω for Pt 100, 50Ω For Pt 50Ω) Unused channels left open are equal to the burnout, which turns the red ERR LED on and sets a burnout flag at the PLC or the host device. Unused channels can be specified and set so on the PC Configurator Software (model: R3CON) without needing to connect resistors at the field terminals. A B B A B B A B B A B B A B B A B B A B B A B B

MODEL: R3Y-RS8 R3Y-RS8 SPECIFICATIONS ES-8959 Rev.9 Page 5/5 https://www.m-system.co.jp/ INPUT CONNECTOR (40-pin) PIN NO. ASSIG NMENT PIN NO. ASSIG NMENT 1A NC 1B NC 2A NC 2B NC 3A NC 3B NC 4A NC 4B NC 5A IN8B 5B IN4B 6A IN8B 6B IN4B 7A IN8A 7B IN4A 8A NC 8B NC 9A IN7B 9B IN3B 10A IN7B 10B IN3B 11A IN7A 11B IN3A 12A NC 12B NC 13A IN6B 13B IN2B 14A IN6B 14B IN2B 15A IN6A 15B IN2A 16A NC 16B NC 17A IN5B 17B IN1B 18A IN5B 18B IN1B 19A IN5A 19B IN1A 20A NC 20B NC Specifications are subject to change without notice.