R3Y-DC16 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: R3Y-DC16 R3Y-DC16 SPECIFICATIONS ES-8964 Rev.10 Page 1/4 https://www.m-system.co.jp/ Remote I/O R3 Series DISCRETE OUTPUT MODULE (relay contact output, 16 points, connector type) 109 [4.29] 27.5 [1.08] 130 [5.12] mm [inch] MODEL: R3Y–DC16[1][2]

ORDERING INFORMATION

  • Code number: R3Y-DC16[1][2] Specify a code from below for each of [1] and [2]. (e.g. R3Y-DC16W/CE/Q)
  • Specify the specification for option code /Q (e.g. /C01) NO. OF CHANNELS 16: 16 [1] COMMUNICATION MODE S: Single W: Dual [2] OPTIONS (multiple selections) Standards & Approvals blank: Without CE /CE: CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

  • Connector terminal block (model: CNT)
  • Special cable with 40-pin connector (model: FCN) GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R3-BSx) Output: 40-pin connector (Fujitsu FCN-365P040-AU) Internal power: Via the Installation Base (model: R3-BSx) Isolation: Output to internal bus or internal power Output hold setting: Setting for communication error with side DIP SW RUN indicator: Bi-color (red/green) LED; Red when the bus A operates normally; Green when the bus B operates normally; Amber when both buses operate normally. ERR indicator: Green LED turns on in normal operating conditions. Output status indicator: Red LED; turns on with the output ON. OUTPUT SPECIFICATIONS Output: Relay contact, 16 points Common: All 16 points (8 terminals) Common current: Max. 4A (total of 8 terminals) (Max. 1 A for one terminal) Rated load: 250 V AC @ 0.5 A (cos ø = 1) (Less than 50 V AC to conform with EU Directive) 30 V DC @ 0.5 A (resistive load) Maximum switching voltage: 250 V AC or 30 V DC Maximum switching power: 250 VA or 150 W Minimum load: 1 V DC @ 1 mA Mechanical life: 2 × 107 cycles (300 cycles/min.) When driving an inductive load, external contact protection and noise quenching recommended. INSTALLATION Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R3-BSx) Weight: 200 g (0.44 lb) PERFORMANCE Data allocation: 1 Current consumption: 180 mA Response time: ≤ 0.1 sec. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (output to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

MODEL: R3Y-DC16 R3Y-DC16 SPECIFICATIONS ES-8964 Rev.10 Page 2/4 https://www.m-system.co.jp/ STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive FUNCTIONS ■OUTPUT HOLD or OUTPUT OFF In normal conditions, the module outputs the signal from the preferred bus A. When an error is detected, the output is switched to the data from the bus B.

  • Output Hold If both are in error, the module holds the signal and stands by until one of the communications recovers.
  • Output OFF If both are in error, the module outputs OFF signals and stands by until one of the communications recovers. At the startup, it outputs OFF until the communication is established and normal data is received. EXTERNAL VIEW ON B A B A RUN LED ERR LED Status Indicator LED Output Connector ■ FRONT VIEW
  • Pin Assignment ■ SIDE VIEW SW3 Output Hold

MODEL: R3Y-DC16 R3Y-DC16 SPECIFICATIONS ES-8964 Rev.10 Page 3/4 https://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm [inch] 130 [5.12] POSITIONING GUIDE SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM INTERNAL POWER DIP SW INTERNAL BUS A INTERNAL BUS B* STATUS INDICATOR LED ERR LED RUN LED Communication Circuit Control Circuit BUS CONNECTOR Numbers in italic indicate LED No.s assigned to the front panel LEDs. *For dual redundant communication. 20A /20B 5A /5B 4A /4B 3A /3B 2A /2B 1A /1B 7A /7B 9A /9B 11A /11B 13A /13B 15A /15B 17A /17B 19A /19B 6A /6B 8A /8B 10A /10B 12A /12B 14A /14B 16A /16B 18A /18B Ry Ry Ry Ry Ry Ry Ry Ry Ry Ry Ry Ry Ry Ry Ry Ry Output Circuit Do 1 Do 16 COM COM COM COM Do 15 Do 14 Do 13 Do 12 Do 11 Do 10 Do 9 Do 8 Do 7 Do 6 Do 5 Do 4 Do 3 Do 2

MODEL: R3Y-DC16 R3Y-DC16 SPECIFICATIONS ES-8964 Rev.10 Page 4/4 https://www.m-system.co.jp/ OUTPUT CONNECTOR (40-pin) PIN No. ASSIGNMENT PIN No. ASSIGNMENT 1A COM 1B COM 2A COM 2B COM 3A COM 3B COM 4A COM 4B COM 5A Do 16 5B Do 16 6A Do 8 6B Do 8 7A Do 15 7B Do 15 8A Do 7 8B Do 7 9A Do 14 9B Do 14 10A Do 6 10B Do 6 11A Do 13 11B Do 13 12A Do 5 12B Do 5 13A Do 12 13B Do 12 14A Do 4 14B Do 4 15A Do 11 15B Do 11 16A Do 3 16B Do 3 17A Do 10 17B Do 10 18A Do 2 18B Do 2 19A Do 9 19B Do 9 20A Do 1 20B Do 1 Specifications are subject to change without notice.