R3Y-DA16 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: R3Y-DA16 R3Y-DA16 SPECIFICATIONS ES-8963 Rev.7 Page 1/4 https://www.m-system.co.jp/ Remote I/O R3 Series DISCRETE INPUT MODULE (Di 16 points; with excitation supply, connector type) 109 [4.29] 27.5 [1.08] 130 [5.12] mm [inch] MODEL: R3Y–DA16[1][2]

ORDERING INFORMATION

  • Code number: R3Y-DA16[1][2] Specify a code from below for each of [1] and [2]. (e.g. R3Y-DA16W/CE/Q)
  • Specify the specification for option code /Q (e.g. /C01) NO. OF CHANNELS 16: 16 [1] COMMUNICATION MODE S: Single W: Dual [2] OPTIONS (multiple selections) Standards & Approvals blank: Without CE /CE: CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

  • Connector terminal block (model: CNT)
  • Special cable with 40-pin connector (model: FCN) GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R3-BSx) Input: 40-pin connector (Fujitsu FCN-365P040-AU) Internal power: Via the Installation Base (model: R3-BSx) Isolation: Input to internal bus or internal power Excitation monitor: Selectable with side DIP switch; ON/OFF setting available RUN indicator: Bi-color (red/green) LED; Red when the bus A operates normally; Green when the bus B operates normally; Amber when both buses operate normally. ERR indicator: Bi-color (red/green) LED; Red with excitation abnormality; Green in normal operating conditions. Input status indicator: Red LED; turns on with the input ON. Read rate: 1 / 5 / 10 / 20 / 50 / 70 / 100 / 200 msec. selectable with DIP SW INPUT SPECIFICATIONS Number of input: 16 points Isolation: Optical isolator + transformer (internal power supply) Input resistance: Approx. 5.9 kΩ Common: Negative commons, all points Contact detecting: 13 V DC (max. 24 V DC with no load) ON current/resistance: ≥ 1.5 mA, ≤ 1.5 kΩ OFF current/resistance: ≤ 0.75 mA, ≥ 18 kΩ Detection levels ON: ≥ 10 V OFF: ≤ 4 V INSTALLATION Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R3-BSx) Weight: 200 g (0.44 lb) PERFORMANCE Data allocation: 1 Current consumption: 100 mA Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @ 1 minute (input to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

MODEL: R3Y-DA16 R3Y-DA16 SPECIFICATIONS ES-8963 Rev.7 Page 2/4 https://www.m-system.co.jp/ STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive FUNCTIONS ■ EXCITATION MONITOR Enabled/disabled with DIP switch setting.

  • Excitation Monitor ON The input is held at the last status when the loss of excitation is detected.
  • Excitation Monitor OFF All input signals are turned off when the loss of excitation is detected. EXTERNAL VIEW B A B A RUN LED ERR LED Status Indicator LED Input Connector ■ FRONT VIEW
  • Pin Assignment ■ SIDE VIEW SW3 ON Exc. Monitor Read Rate EXTERNAL DIMENSIONS unit: mm [inch] 130 [5.12] POSITIONING GUIDE

MODEL: R3Y-DA16 R3Y-DA16 SPECIFICATIONS ES-8963 Rev.7 Page 3/4 https://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM BUS CONNECTOR INTERNAL POWER RUN LED ERR LED STATUS INDICATOR LED Input Circuit Numbers in italic indicate LED No.s assigned to the front panel LEDs. * For dual redundant communication. **DO NOT connect to the pins 4A/4B or 3A/3B. Communication Circuit Control Circuit DIP SW

  • Input Circuit Di 1 Di 16

16 Control

INTERNAL BUS B * Di 1 Di 16 Di 15 Di 14 Di 13 Di 12 Di 11 Di 10 Di 9 Di 8 Di 7 Di 6 Di 5 Di 4 Di 3 Di 2 20A /20B 5A /5B 4A /4B 3A /3B 2A /2B 1A /1B 7A /7B 9A /9B 11A /13B 13A /13B 15A /15B 17A /17B 19A /19B 6A /6B 8A /8B 10A /10B 12A /12B 14A /14B 16A /16B 18A /18B 20A /20B 5A /5B 2A /2B 1A /1B

MODEL: R3Y-DA16 R3Y-DA16 SPECIFICATIONS ES-8963 Rev.7 Page 4/4 https://www.m-system.co.jp/ INPUT CONNECTOR (40-pin) PIN NO ASSIGNMENT PIN NO ASSIGNMENT 1A 0V 1B 0V 2A 0V 2B 0V 3A NC 3B NC 4A NC 4B NC 5A Di16 5B Di16 6A Di8 6B Di8 7A Di15 7B Di15 8A Di7 8B Di7 9A Di14 9B Di14 10A Di6 10B Di6 11A Di13 11B Di13 12A Di5 12B Di5 13A Di12 13B Di12 14A Di4 14B Di4 15A Di11 15B Di11 16A Di3 16B Di3 17A Di10 17B Di10 18A Di2 18B Di2 19A Di9 19B Di9 20A Di1 20B Di1 Specifications are subject to change without notice.