R3G250-RE07-07

R3G250-RE EBMPAPST | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Druck p f s[Pa]für Rho=1,2kg/m^3 qv[m^3/h] qv[cfm] 1.0009008007006005004003002001000 ]aP[sf p 720 700 680 660 640 620 600 580 560 540 520 500 480 460 440 420 400 380 360 340 320 300 280 260 240 220 200 180 160 140 120 100 pfs_E[IN H2O] 2,9 2,8 2,7 2,6 2,5 2,4 2,3 2,2 2,1 1,9 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 0,1 0]aP[sf p ]aP[sf p ]aP[sf p ]aP[sf p Highlights: – Backward curved – 7-blade impeller, single phase motor – Output 10 VDC, max. 1.1 mA, Tach output, Control input 0-10 VDC / PWM – Motor current limit, Soft start, Locked-rotor protection, Over temperature protected electronics / motor – Mounting position: Any – Condensate discharge holes: None, open rotor – Ingress protection of IP54 Material: Fiberglass reinforced composite Impeller: PA6 Direction of rotation: Clockwise, seen on rotor Series R3G250 RE Ø250 mm (1) Nominal data at operating point wtih maximum load. Nominal Data Air flow Nominal voltage Voltage range Hertz Ball bearings Power input Speed (1) Temperature range (1) Mass Ingress Protection Rating UL Type CFM VAC VAC Watts RPM oC g 12A A A A A A A A A A A A 16A A A A 12A A A A A A A A A A A A 16A A A A 2615 135 1.76 75 2535 155 2.01 71 2520 160 2.10 67 2580 145 1.90 73 2400 104 1.36 73 2400 131 1.70 69 2400 138 1.79 66 2400 117 1.53 70 2000 60 0.79 69 2000 76 0.99 65 2000 80 1.03 62 2000 68 0.89 66 1600 31 0.40 63 1600 39 0.50 59 1600 41 0.53 56 1600 35 0.45 60 Measurement: LU-142364 Air performance measured as per: ISO 5801, Installation category A, without protection against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LPA measured at 1m distance to fan axis. The values given are valid under the measuring conditions mentioned and may vary accoring to the actual installation situation. With any deviation to the standard set-up, the specific values have to be checked and reviewed once installed or fitted. For detailed information on the measuring set-up, please contact ebm-papst. R3G250-RE21-08 Curves n rpm Pe W I A (115V) LwA dB(A) EC centrifugal fans - RadiCal®

Ø0.18(4.5) 4X 0.24 (6) 17.72 (450 +20) 3.54 (90 +0.2) 2.28 (58 +0.2) Ø9.84 (250) Ø10.04(255) Ø9.45 (240) Ø6.48 (164.5) Ø3.96(100.6) Ø2.92 (74.2) 0.06 (1.5) 1.22 (31) Depth of screw max. 5mm Accessory part: Inlet nozzle 96359-2-4013, not included in the standard scope of delivery Depth of screw max. 10mm Connection line PVC 4X 0.5mm 2, 4 x brass lead tips crimped 2.76 (70 +10) 0.08 (2) 3.35 (85) 3.90(99+0.1) 0.20 (5) 0.07 (1.7) Ø6.77 (172+0.5) Ø2.83 (72) Connection line PVC 3G 0.5mm 2, 3 x brass lead tips crimped R3G250-REXX-XX pfs @ rho=1,2 kg/m³ qv [m³/h] 1400120010008006004002000 qv [CFM] 80070060050040030020010000 pfs [Pa] 600 550 500 450 400 350 300 250 200 150 100 pfs [InH2O] 2,5 2,4 2,3 2,2 2,1 1,9 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 0,1 Measurement: LU-154717 Air performance measured as per: ISO 5801, Installation category A, without protection against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LPA measured at 1m distance to fan axis. The values given are valid under the measuring conditions mentioned and may vary accoring to the actual installation situation. With any deviation to the standard set-up, the specific values have to be checked and reviewed once installed or fitted. For detailed information on the measuring set-up, please contact ebm-papst. R3G250-RE07-07 Curves n rpm Pe W I A (230V) LwA dB(A) 12A A A A A A A A A A A A 16A A A A 12A A A A A A A A A A A A 16A A A A 2655 143 1.18 76 2630 170 1.40 72 2510 170 1.40 67 2620 168 1.39 73 2400 105 0.87 73 2400 129 1.07 69 2400 144 1.19 66 2400 129 1.07 70 2000 61 0.51 69 2000 75 0.62 65 2000 83 0.69 62 2000 75 0.62 66 1600 31 0.26 63 1600 38 0.32 59 1600 43 0.35 56 1600 38 0.32 60 B B B B B B B B B B B B B B B B