R3G225-RE EBMPAPST | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Druck p f s[Pa]für Rho=1,2kg/m^3 qv[m^3/h] qv[cfm] 8007006005004003002001000 ]aP[sf p 760 740 720 700 680 660 640 620 600 580 560 540 520 500 480 460 440 420 400 380 360 340 320 300 280 260 240 220 200 180 160 140 120 100 pfs_E[IN H2O] 3,1 2,9 2,8 2,7 2,6 2,5 2,4 2,3 2,2 2,1 1,9 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 0,1 ]aP[sf p ]aP[sf p ]aP[sf p ]aP[sf p Highlights: – Backward curved – 7-blade impeller, single phase motor – Output 10 VDC, max. 1.1 mA, Tach output, Control input 0-10 VDC / PWM – Motor current limit, Soft start, Locked-rotor protection, Over temperature protected electronics / motor – Mounting position: Any – Condensate discharge holes: None, open rotor – Ingress protection of IP54 Material: Fiberglass reinforced composite Impeller: PA6 Direction of rotation: Clockwise, seen on rotor Series R3G225 RE Ø225 mm (1) Nominal data at maximum load. Nominal Data Air flow Nominal voltage Voltage range Hertz Ball bearings Power input Speed (1) Temperature range (1) Mass Ingress Protectin Rating UL Type CFM VAC VAC Watts RPM oC g 12A A A A A A A A A A A A 16A A A A 12A A A A A A A A A A A A 16A A A A 2985 153 1.99 78 2870 170 2.20 74 2895 162 2.09 68 2965 150 1.95 73 2500 90 1.17 75 2500 113 1.45 70 2500 104 1.34 66 2500 90 1.17 69 2000 46 0.60 69 2000 58 0.74 65 2000 53 0.69 61 2000 46 0.60 63 1500 19 0.25 63 1500 25 0.31 59 1500 23 0.29 55 1500 19 0.25 57 Measurement: LU-142355 Air performance measured as per: ISO 5801, Installation category A, without protection against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LPA measured at 1m distance to fan axis. The values given are valid under the measuring conditions mentioned and may vary accoring to the actual installation situation. With any deviation to the standard set-up, the specific values have to be checked and reviewed once installed or fitted. For detailed information on the measuring set-up, please contact ebm-papst. R3G225-RE19-04 Curves n rpm Pe W I A (115V) LwA dB(A) EC centrifugal fans - RadiCal®
Ø6.04(153.5+0.2) Ø8.86 (225) Ø8.78(223) Ø8.57 (210) Ø5.75 (146) 0.24 (6) 3.35 (85 +10) 17.72 (450 +20) 3.54 (90 +0.2) 2.28 (58 +0.2) Ø3.98(101) Ø2.95 (75) 0.20 (5) Ø0.18(4.5) 4X 0.06 (1.5) 1.10 (28) 3.48 (88.4) 3.90 (99) 0.08 (2) Ø2.83 (72) Connection line PVC 3G AWG20; 3 x brass lead tips crimped Depth of screw max. 10mm Accessory part: Inlet nozzle 96358-2-4013, not included in the standard scope of delivery Depth of screw max. 5mm Connection line PVC 4X AWG20; 4 x brass lead tips crimped R3G225-REXX-XX Druck p f s[Pa]für Rho=1,2kg/m^3 qv[m^3/h] qv[cfm] 8007006005004003002001000 ]aP[sf p 780 760 740 720 700 680 660 640 620 600 580 560 540 520 500 480 460 440 420 400 380 360 340 320 300 280 260 240 220 200 180 160 140 120 100 pfs_E[IN H2O] 3,1 2,9 2,8 2,7 2,6 2,5 2,4 2,3 2,2 2,1 1,9 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 0,1 0]aP[sf p ]aP[sf p ]aP[sf p ]aP[sf p Measurement: LU-129100 Air performance measured as per: ISO 5801, Installation category A, without protection against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LPA measured at 1m distance to fan axis. The values given are valid under the measuring conditions mentioned and may vary accoring to the actual installation situation. With any deviation to the standard set-up, the specific values have to be checked and reviewed once installed or fitted. For detailed information on the measuring set-up, please contact ebm-papst. R3G225-RE07-03 Curves n rpm Pe W I A (230V) LwA dB(A) 12A A A A A A A A A A A A 16A A A A 12A A A A A A A A A A A A 16A A A A 3030 151 1.25 78 2910 168 1.40 74 2860 170 1.40 68 2970 157 1.35 73 2700 107 0.89 76 2700 134 1.11 72 2700 135 1.15 67 2700 118 1.01 70 2200 58 0.48 70 2200 73 0.60 67 2200 73 0.62 62 2200 64 0.55 65 1700 27 0.22 64 1700 33 0.28 61 1700 34 0.29 56 1700 29 0.25 59 B B B B B B B B B B B B B B B B