R30US2 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

MODEL: R30US2 R30US2 SPECIFICATIONS ES-9017 Rev.3 Page 1/7 https://www.m-system.co.jp/ Remote I/O R30 Series UNIVERSAL INPUT MODULE (2 points, isolated) Functions & Features

  • 2 channels for universal input remote I/O module
  • Isolation between the channels
  • Input range of each channel is individually adjustable with PC configurator 25 [.98] mm [inch] [3.86] 110 [4.33] MODEL: R30US2S[1]

ORDERING INFORMATION

  • Code number: R30US2S[1] Specify a code from below for [1]. (e.g. R30US2S/Q)
  • Specify the specification for option code /Q (e.g. /C01/SET) NO. OF CHANNELS 2: 2 COMMUNICATION MODE S: Single [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-9017) CAUTION ■ UNUSED INPUT CHANNELS Set unused channels to "CH disabled" with PC Configurator software (model: R30CFG). Otherwise, unused channels left open are to be lower than -15 % or burnout status, setting a data error at the PLC or other host devices.

RELATED PRODUCTS

  • PC configurator software (model: R30CFG) Downloadable at M-System’s web site. For connecting to PC, use commercially available Mini-B type USB cable. (provided by user) GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R30BS) Input: M3 separable screw terminal (torque 0.5 N·m) Internal power: Via the Installation Base (model: R30BS) Solderless terminal: Refer to the drawing at the end of the section. Recommended manufacturer: Japan Solderless Terminal (Solderless terminals with insulation sleeve do not fit.) Applicable wire size: 0.25 to 0.75 mm2 Screw terminal: Nickel-plated steel Isolation: Input 1 to input 2 to internal bus or internal power Input type & range: Selectable with PC configurator software (model: R30CFG) Burnout (T/C, RTD, potentiometer, resistor input): Selectable among upscale, downscale or no burnout with PC configurator software (model: R30CFG) Linearization (T/C, RTD input): Standard tables stored in memory Cold junction compensation (T/C): CJC sensor (included) to be attached to the input terminals Status indicator LED: RUN, ERR (refer to the instruction manual) ■Recommended solderless terminal size - M3 (unit: mm) 12 max. 6 max. 3 max. 3.2 dia.

MODEL: R30US2 R30US2 SPECIFICATIONS ES-9017 Rev.3 Page 2/7 https://www.m-system.co.jp/ INPUT SPECIFICATIONS Module type: Analog input, 2 points ■ Universal Input Refer to the users manual of R30CFG for setting input type and range

  • DC current input Input resistance: Input resistor (49.9 Ω) incorporated Input range: -20 – +20 mA
  • DC narrow span voltage input range (-1000 – +1000 mV) Input resistance: ≥ 100 kΩ
  • DC wide span voltage input range (-10 – +10 V) Input resistance: ≥ 1 MΩ
  • Thermocouple input Input resistance: ≥ 100 kΩ Input range: See Table 1 Conformance range: See Table 1
  • RTD input (2- or 3-wire) Input sensing: ≤ 0.33 mA Input range: See Table 1 Maximum leadwire resistance: 20 Ω per wire ∙Potentiometer input Input sensing: ≤ 0.33 mA Input range: 0 – 4000 Ω Maximum leadwire resistance: 20 Ω per wire ∙Resistor input Input sensing: ≤ 0.33 mA Input range: 0 – 4000 Ω Maximum leadwire resistance: 20 Ω per wire INSTALLATION Current consumption: 45 mA Operating temperature: -10 to +55°C (14 to 131°F) Storage temperature: -20 to +65°C (-4 to +149°F) Operating humidity: 10 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R30BS) Weight: 170 g (0.37 lb) PERFORMANCE Conversion accuracy: See Table 1. Conversion rate: ≤ 100 msec. Converted data range DC current/voltage, potentiometer or resistor: 0 to 10000 with respect to input range (Default setting) Thermocouple or RTD: °C, K: Engineering unit value × 10 (integer) (Default setting) °F: Engineering unit value (integer) * Scaling of converted data is configurable with the configurator software (model: R30CFG). Refer to the software manual for details. Data allocation: 2 Cold junction compensation error (T/C): (Cold junction compensation is not available for B thermocouple.) Temp. coefficient: ±0.03 %/°C (±0.02 %/°F) Input delay time: ≤ 150 msec. Burnout response time (T/C, RTD, potentiometer or resistor input): ≤ 1 sec. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input 1 to input 2 to internal bus or internal power)

1500 V AC @ 1 minute (power input to FE; isolated on the

power supply module) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive

MODEL: R30US2 R30US2 SPECIFICATIONS ES-9017 Rev.3 Page 3/7 https://www.m-system.co.jp/ INPUT TYPE, RANGE & CONVERSION ACCURACY 5BCMF INPUT TYPE INPUT RANGE CONVERSION ACCURACY DC Current -20 – +20 mA DC ±20 μA DC Voltage -1000 – +1000 mV DC When maximum range * is 60 mV or less: ±80 μV When maximum range * is 120 mV or less: ±150 μV When maximum range * exceeds 120 mV: ±1 mV -10 – +10 V DC ±10 mV Potentiometer * 0 – 4000 Ω Larger value of either ±0.1 Ω or ±0.1 % Resistor * 0 – 4000 Ω Larger value of either ±0.1 Ω or ±0.1 % Thermocouple* 3 °C °F Usable range Conv. accuracy * Conformance range Usable range Conv. accuracy * Conformance range (PR) -50 – +1860 ±2.0 0 – 1760 -58 – +3380 ±3.6 32 – 3200 B (RH) 20 – 1920 ±2.0 400 – 1760 68 – 3488 ±3.6 752 – 3200 R -100 – +1860 ±2.0 200 – 1760 -148 – +3380 ±3.6 392 – 3200 S -100 – +1860 ±2.0 0 – 1760 -148 – +3380 ±3.6 32 – 3200 C (WRe 5-26) -50 – +2420 ±2.0 0 – 2315 -58 – +4388 ±3.6 32 – 4199 P (Platinel II) -50 – +1500 ±1 .0 0 – 1395 -58 – +2732 ±1 .8 32 – 2543 RTD 3 °C °F Usable range Conv. accuracy Conformance range Usable range Conv. accuracy Conformance range Pt 100 (JIS’97 , IEC) -240 – +950 ±1 .0 -200 – +850 -400 – +1742 ±1 .8 -328 – +1562 Pt 500 -240 – +950 ±0.5 -200 – +850 -400 – +1742 ±0.9 -328 – +1562 Pt 1000 -240 – +950 ±0.5 -200 – +850 -400 – +1742 ±0.9 -328 – +1562 Pt 50 Ω (JIS’81) -235 – +750 ±2.0 -200 – +649 -391 – +1382 ±3.6 -328 – +1200 JPt 100 (JIS’89) -235 – +610 ±1 .0 -200 – +510 -391 – +1130 ±1 .8 -328 – +950 *1 Thermocouple: Cold junction compensation error is not included in above figures. Take it into account when cold junction compensation is enabled. *2. Maximum range: Absolute value of 0% or 100% of the input range, whichever is greater. *3. Burnout indication (potentiometer, resistor, thermocouple or RTD): upscale burnout (32767), downscale burnout (-32768).

MODEL: R30US2 R30US2 SPECIFICATIONS ES-9017 Rev.3 Page 4/7 https://www.m-system.co.jp/ CONFIGURATOR SOFTWARE SETTING The following parameters can be set with using PC Configurator Software (model: R30CFG) Refer to the users manual for the R30CFG for detailed operation of the software program. ■ CHANNEL INDIVIDUAL SETTING PARAMETER SETTING RANGE DEFAULT SETTING Unused setting CH enabled CH disabled CH enabled Input type -10 – +10 V DC -1000 – +1000 mV DC -20 – +20 mA DC POT 0 – 4000 Ohm POT 0 – 2500 Ohm POT 0 – 1200 Ohm POT 0 – 600 Ohm POT 0 – 300 Ohm POT 0 – 150 Ohm OHM 0 – 4000 Ohm RTD Pt 100 RTD Pt 500 RTD Pt 1000 RTD Pt 50 Ω RTD JPt 100 RTD Ni 508.4 Ω RTD Cu 10 TC (PR) TC K TC E TC J TC T TC B TC R TC S TC C TC N TC U TC L TC P -10 – +10 V DC Wiring 2-wire 3-wire Burnout Upscale Downscale None CJC Enabled Disabled Unit degC degF K Fine zero adjustment -320.00 – +320.00 (%) 0.00 (%) Fine gain adjustment -3.2000 – +3.2000 1.0000 Zero base depends on input types* -10.000 V DC Full base depends on input types*

10.000 V DC

Scaled range Zero -32 000 – +32 000 0 Scaled range Span -32 000 – +32 000 10 000 *1 . For details, refer to the users manual of R30CFG.

MODEL: R30US2 R30US2 SPECIFICATIONS ES-9017 Rev.3 Page 5/7 https://www.m-system.co.jp/ EXTERNAL VIEW RUN ERR CJC Sensor (CJM × 2) ■ FRONT VIEW ■ BOTTOM VIEW ■ SIDE VIEW Specifications Positioning Guide Terminal Cover Lock Tab Base Fixing Screw RUN LED Input Terminal Block ERR LED Terminal Fixing Screw TERMINAL ASSIGNMENTS No. ID FUNCTION Wide Span Voltage Range / Current Narrow Span Voltage Range T/C RTD / Resistor (3-wire) RTD / Resistor (2-wire) Potentiometer 1 U11 Wide Span volt. range / Current 1 – – – – – 2 U12 – Narrow Span volt. range 1 T/C 1 RTD 1-b – Input S1 3 U21 Wide Span volt. range / Current 2 – – – – – 4 U22 – Narrow Span volt. range 2 T/C 2 RTD 2-b – Input S2

5 NC No connection

6 NC No connection

7 NC No connection

8 NC No connection

9 NC No connection

10 NC No connection

11 U13 – – CJM1 RTD 1-B RTD 1-B Input L1

12 U14 Common 1 Common 1 Common 1 RTD 1-A RTD 1-A Input H1

13 U23 – – CJM2 RTD 2-B RTD 2-B Input L2

14 U24 Common 2 Common 2 Common 2 RTD 2-A RTD 2-A Input H2

15 NC No connection

16 NC No connection

17 NC No connection

18 NC No connection

19 NC No connection

20 NC No connection

MODEL: R30US2 R30US2 SPECIFICATIONS ES-9017 Rev.3 Page 6/7 https://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch] 110 [4.33] 25 [.98] 98 [3.86] 20–M3 SCREW [.24] SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Comm. Circuit Control Circuit U11 U12 U21 U22 U13 U14 U24 U23 Input 1 Input 2 RUN LED ERR LED Input Circuit Input Circuit INTERNAL POWER INTERNAL BUS BUS CONNECTOR

MODEL: R30US2 R30US2 SPECIFICATIONS ES-9017 Rev.3 Page 7/7 https://www.m-system.co.jp/

  • DC Voltage (-10 – +10V)
  • DC Current (-20 – +20mA) ■ UNIVERSAL INPUT CONNECTION
  • Thermocouple CJC Sensor A B B A B max. min. Un1 Un3 Un4 Un2 Un1 Un3 Un4 Un2 Un1 Un3 Un4 Un2 Un1 Un3 Un4 Un2 INPUT INPUT Un1 Un3 Un4 Un2 Un1 Un3 Un4 Un2
  • DC Voltage (-1000 – +1000mV)
  • RTD or Resistor (3-wire) • RTD or Resistor (2-wire) • Potentiometer Specifications are subject to change without notice.