R30SV2 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

MODEL: R30SV2 R30SV2 SPECIFICATIONS ES-9015 Rev.3 Page 1/6 https://www.m-system.co.jp/ Remote I/O R30 Series DC VOLTAGE/CURRENT INPUT MODULE (2 points, isolated) Functions & Features

  • 2 channels for DC voltage/current input remote I/O module
  • Isolation between input channels
  • Input range of each channel is individually adjustable with PC configurator 25 [.98] mm [inch] [3.86] 110 [4.33] MODEL: R30SV2S[1]

ORDERING INFORMATION

  • Code number: R30SV2S[1] Specify a code from below for [1]. (e.g. R30SV2S/Q)
  • Specify the specification for option code /Q (e.g. /C01/SET) NO. OF CHANNELS 2: 2 COMMUNICATION MODE S: Single [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-9015) CAUTION ■ UNUSED INPUT CHANNELS Set unused channels to "CH disabled" with PC Configurator software: R30CFG. When input range is 1 to 5 V DC or 4 to 20 mA DC, input values of the unused channels left open are to be lower than -15 %, which set a data error at the PLC or other host devices.

RELATED PRODUCTS

  • PC configurator software (model: R30CFG) Downloadable at M-System’s web site. For connecting to PC, use commercially available Mini-B type USB cable. (provided by user) GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R30BS) Input: M3 separable screw terminal (torque 0.5 N·m) Internal power: Via the Installation Base (model: R30BS) Solderless terminal: Refer to the drawing at the end of the section. Recommended manufacturer: Japan Solderless Terminal (Solderless terminals with insulation sleeve do not fit.) Applicable wire size: 0.25 to 0.75 mm2 Screw terminal: Nickel-plated steel Isolation: Input 1 to input 2 to internal bus or internal power Input range: Selectable with PC configuration software (model: R30CFG) Conversion rate: Selectable with PC configuration software (model: R30CFG) Status indicator LED: RUN, ERR (refer to the instruction manual) ■Recommended solderless terminal size - M3 (unit: mm) 12 max. 6 max. 3 max. 3.2 dia. INPUT SPECIFICATIONS Module type: Analog input, 2 points ■ DC Current Input resistor: 70 Ω Input range: -20 to +20 mA DC, 0 to 20 mA DC, 4 to 20 mA DC ■ Narrow span voltage

MODEL: R30SV2 R30SV2 SPECIFICATIONS ES-9015 Rev.3 Page 2/6 https://www.m-system.co.jp/ Input resistance: ≥ 100 kΩ Input range: -1 to +1 V DC, 0 to 1 V DC, -0.5 to +0.5 V DC ■ Wide span voltage Input resistance: ≥ 1 MΩ Input range: -10 to +10 V DC (*), -5 to +5 V DC, 0 to 10 V DC, 0 to 5 V DC, 1 to 5 V DC (*) Factory setting INSTALLATION Current consumption: 40 mA Operating temperature: -10 to +55°C (14 to 131°F) Storage temperature: -20 to +65°C (-4 to +149°F) Operating humidity: 10 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R30BS) Weight: 160 g (0.35 lb) PERFORMANCE Conversion rate / conversion accuracy: ±0.1% (*) (*) Factory setting Data range: 0 – 10000 of the input range Data allocation: 2 Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Input delay time: 50 msec. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input 1 to input 2 to internal bus or internal power)

1500 V AC @ 1 minute (power input to FE; isolated on the

power supply module) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive

MODEL: R30SV2 R30SV2 SPECIFICATIONS ES-9015 Rev.3 Page 3/6 https://www.m-system.co.jp/ CONFIGURATOR SOFTWARE SETTING The following parameters can be set with using PC Configurator Software (model: R30CFG) Refer to the users manual for the R30CFG for detailed operation of the software program. ■ CHANNEL INDIVIDUAL SETTING PARAMETER SETTING RANGE DEFAULT SETTING Unused setting CH enabled CH disabled CH enabled Input range -10 – +10 V DC -5 – +5 V DC -1 – +1 V DC 0 – 10 V DC 0 – 5 V DC 1 – 5 V DC 0 – 1 V DC -0.5 – +0.5 V DC -20 – +20 mA DC 4 – 20 mA DC 0 – 20 mA DC -10 – +10 V DC Fine zero adjustment -320.00 – +320.00 (%) 0.00 (%) Fine gain adjustment -3.2000 – +3.2000 1 .0000 Scaled range Zero -32 000 – +32 000 0 Scaled range Span -32 000 – +32 000 10 000 ■ CHANNEL BATCH SETTING PARAMETER SETTING RANGE DEFAULT SETTING Conversion rate 80 ms 40 ms 20 ms 10 ms 80 ms Simulate input Normal input Simulated data Normal input

MODEL: R30SV2 R30SV2 SPECIFICATIONS ES-9015 Rev.3 Page 4/6 https://www.m-system.co.jp/ EXTERNAL VIEW RUN ERR RUN LED Input Terminal Block ERR LED ■ FRONT VIEW ■ BOTTOM VIEW ■ SIDE VIEW Lock Tab Base Fixing Screw Specifications Positioning Guide Terminal Cover Terminal Fixing Screw TERMINAL ASSIGNMENTS VH1 COM1 VH2 COM2 NC NC NC NC NC NC VL1 VL2 NC NC NC NC NC NC NO. ID FUNCTION NO. ID FUNCTION 1 VL1 Narrow span volt. 1 11 VH1 Wide span volt. 1

2 I1 Current range 1 12

3 VL2 Narrow span volt. 2 13 VH2 Wide span volt. 2

4 I2 Current range 2 14

5 NC No connection 15 NC No connection

6 NC No connection 16 NC No connection

7 NC No connection 17 NC No connection

8 NC No connection 18 NC No connection

9 NC No connection 19 NC No connection

10 NC No connection 20 NC No connection

MODEL: R30SV2 R30SV2 SPECIFICATIONS ES-9015 Rev.3 Page 5/6 https://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch] ᶃ ᶄ ᶅ ᶆ ᶍ ᶎ ᶏ ᶐ ᶇ ᶈ ᶉ ᶊ ᶋ ᶌ ᶑ ᶒ ᶓ ᶔ ᶕ ᶖ 110 [4.33] 25 [.98] 98 [3.86] 20–M3 SCREW [.24] SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM ■ Input Connection Examples VHn In COMn VLn ʴ WIDE SPAN VOLTAGE ʴ VHn In COMn VLn NARROW SPAN VOLTAGE Note: Be sure to close across VLn and In terminals for a current input. ʴ VHn In COMn VLn CURRENT RANGE

11 VH1

13 VH2

Note: DO NOT connect a HV range, a LV range, a current range in the same channel at the same time. INPUT1 INPUT2 INTERNAL POWER INTERNAL BUS Comm. Circuit Input Circuit Input Circuit

MODEL: R30SV2 R30SV2 SPECIFICATIONS ES-9015 Rev.3 Page 6/6 https://www.m-system.co.jp/ Specifications are subject to change without notice.