R30GCIE1 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MODEL: R30GCIE1 R30GCIE1 SPECIFICATIONS ES-9027 Rev.3 Page 1/5 https://www.m-system.co.jp/ Remote I/O R30 Series CC-Link INTERFACE MODULE (CC-Link IE Field network) Functions & Features

  • Serves as a gateway for allowing CC-Link IE Field Network data to be handled by network modules that use different protocols.
  • Recognized as an analog I/O mixed module by the network modules.
  • Works as a slave station on CC-Link IE Field Network in the same manner as R30NCIE1. Typical Applications
  • A gateway for CC-Link IE Filed and EtherCAT. 98 [3.86] 110 [4.33] [.98] mm [inch] MODEL: R30GCIE1S[1]

ORDERING INFORMATION

  • Code number: R30GCIE1S[1] Specify a code from below for [1]. (e.g. R30GCIE1S/Q)
  • Specify the specification for option code /Q (e.g. /C01) COMMUNICATION MODE S: Single [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating CAUTION Please use this unit with a network module (model: R30NECT1) of firmware version V1.04.10 or higher, and a network module (model: R30NCIE1) of firmware version V1.01.13 or higher.

RELATED PRODUCTS

  • PC configurator software (model: R30CFG) Downloadable at M-System’s web site. For connecting to PC, use commercially available Mini-B type USB cable. (provided by user) GENERAL SPECIFICATIONS Connection CC-Link IE Field: RJ-45 connector Internal bus: Via the Installation Base (model: R30BS) Internal power: Via the Installation Base (model: R30BS) Isolation: CC-Link IE Field to internal bus or internal power Internal bus communication cycle: Approx. 1 msec. Status indicator: RUN, RD, SD, D LINK, ERR, L ER, LINK (Refer to the instruction manual.) CC-Link IE Field COMMUNICATION Protocol: IEEE 802.3 Transmission type: 1000BASE-T Communication speed: 1 Gbps Network cable: Cable conformed to CC-Link IE Field Double shielded twist pair cable (CAT5e) RJ-45 connector Network topology: Line, star and ring Max. number of stations: 120 (Total slave stations) (Number of max. connectable slaves may vary depending on the master module. Refer to the instruction manual of the master module) Max. station-to-station distance: 100 m Station type: Remote device station Link device: RX/RY 128 points, RWw/RWr 64 points NetWork No.: 1 to 239 (factory default: 1) INSTALLATION Current consumption: 140 mA Operating temperature: -10 to +55°C (14 to 131°F) Storage temperature: -20 to +65°C (-4 to +149°F) Operating humidity: 10 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R30BS) Weight: 125 g (0.28 lb)

MODEL: R30GCIE1 R30GCIE1 SPECIFICATIONS ES-9027 Rev.3 Page 2/5 https://www.m-system.co.jp/ PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (CC-Link IE Field to internal bus or internal power)

1500 V AC @ 1 minute (power input to FE; isolated on the

power supply module) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EXTERNAL VIEW Status Indicator LEDs Not in use CC-Link IE Field Communication RJ-45 Modular Jack Station No. Rotary SW ■ FRONT VIEW ■ BOTTOM VIEW ■ SIDE VIEW Specifications Lock Tab Base Fixing Screw Positioning Guide CN1 CN2 ×10 STATION No. L ER LINK L ER LINK RUN RD SD D LINK ERR

MODEL: R30GCIE1 R30GCIE1 SPECIFICATIONS ES-9027 Rev.3 Page 3/5 https://www.m-system.co.jp/ TRANSMISSION DATA DESCRIPTIONS Number of transmission data: 4 points (4 words) for input; 4 points (4 words) for output This unit is equivalent to an analog I/O mixed module (AIO4) of R30 series, and is recognized as an I/O module by Interface module (e.g. model: R30NECT1). Station type: Remote device station Link device: RX/RY 128 points, RWw/RWr 64 points Host PC/PLC Input data R30PS1 Output data R30Nx* R30GCIE1 CC-Link IE Field master Output data RWw Input data RWr

  • DATA FLOW * R30Nx: R30 Interface module n: initial device 015 RWw (n + 0) RWw (n + 1) RWw (n + 2) RWw (n + 3) RWw (n + 4) RWw (n + 63) ■ OUTPUT DATA The figure below shows details of data transmitted to Host PC/PLC from Interface module. [CC-Link IE Field master]—>[R30GCIE1]—>[R30 internal bus] —>[R30 interface module]—>[Host PC/PLC] Output data (RWw) from CC-Link IE Field master is transmitted as Input data to Host PC/PLC. Output data Not in use n: initial device 015 RWr (n + 0) RWr (n + 1) RWr (n + 2) RWr (n + 3) RWr (n + 4) RWr (n + 63) ■ INPUT DATA The figure below shows details of data received by Interface module from Host PC/PLC. [Host PC/PLC]—>[R30 interface module]—>[R30 internal bus] —>[R30GCIE1]—>[CC-Link IE Field master] Output data from Host PC/PLC is transmitted as Input data (RWr) to CC-Link IE Field master. Input data Not in use

MODEL: R30GCIE1 R30GCIE1 SPECIFICATIONS ES-9027 Rev.3 Page 4/5 https://www.m-system.co.jp/ n: initial device 02 13 46 57 8A 9B CE DF RX (n + 1) RX (n + 0) RX (n + 2) RX (n + 7) ■ STATUS

  • RX(n+0)0 to 7 is reservation area, RX(n+0)B is used as Ready signal, and the bit is“1” when this module is operating normally. RX(n+0)8 to A and RX(n+0)C to F are not in use.
  • Module Status RX (n + 1)0 indicates communication status of this unit. 1 = Normal communication 0 = Communication error / timeout RX (n + 1)1 indicates internal communication status. 1 = Normal communication 0 = Communication stop / communication error RX (n + 1)2 indicates communication status of field bus built in the interface module. 1 = Normal communication 0 = Communication stop / communication error / timeout RX (n + 1)3 to F are not in use. Link devices other than the above are not in use. Module status Remote READY Not in use EXTERNAL DIMENSIONS unit: mm [inch] 110 [4.33] 25 [.98] 98 [3.86]

MODEL: R30GCIE1 R30GCIE1 SPECIFICATIONS ES-9027 Rev.3 Page 5/5 https://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM CONNECTOR INTERNAL BUSComm. Circuit Control Circuit USB CONNECTOR RJ-45 MODULAR JACK RJ-45 MODULAR JACK Not in use CC-Link IE Field CN1 CC-Link IE Field CN2 STATUS IND. LEDs INTERNAL POWER STATION NO. SETTING ROTARY SW CN1 and CN2 of RJ-45 modular jacks for CC-Link IE Field network can be connected in any order. Isolation Isolation SYSTEM CONFIGURATION EXAMPLES The below figure shows a system configuration example in which CC-Link IE Field data is converted into EtherCAT data by using this unit as a gateway. EtherCAT CC-Link IE Field CC-Link IE Field master module R30 PS1 R30 NECT1 R30 GCIE1 EtherCAT master module Specifications are subject to change without notice.